PDF download Download Article
Access your desktop from any computer on your network
PDF download Download Article

Enabling Remote Desktop remotely requires some sidestepping, but it is possible. As long as you have administrator access to the remote computer, you can enter its registry and turn on Remote Desktop from there.

Use Regedit to Turn on Remote Desktop

  1. Type "services.msc" into the Search bar and press Enter .
  2. Right-click Services (Local), then select Connect to another computer .
  3. Go to File > Computer Network Registry…
  4. Enter the remote computer's name, then click Check Names .
  5. Go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Terminal .
  6. Set the value data of "fDenyTSConnections" to 0 and click OK .
Part 1
Part 1 of 2:

Enabling Remote Desktop Remotely

PDF download Download Article
  1. As always, be aware that editing the registry risks causing major problems. Make a backup before you begin, and do not make any unnecessary changes.
    • Only follow this guide if you do not have physical access to the computer. If you do, use the standard user tools to enable remote desktop without editing the registry.
  2. Run services.msc from the Start menu search box. [1] You can also find the Services MMC through Control Panel Administrative Tools Services .
    • You only need the MMC to start Remote Registry. If the remote computer is running Windows XP, this is probably already running. Skip down to "connect to the remote registry."
    Advertisement
  3. In the Services MMC, right-click "Services (Local)" and select "Connect to another computer." Enter the name of your remote machine. Once connected, find the Remote Registry service in the MMC and start it, if it isn't already running.
  4. Open regedit. Select File Connect Network Registry... . [2] Type the remote computer name under "Select Computer" and click Check Names . [3]
  5. Navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Terminal Server.
  6. Look for the REG_WORD value named fDenyTSConnections in the Terminal Server details pane. [4] Double click this to open the EDIT DWORD Value box. In this box, set the Value Data field to 0. [5]
  7. Some systems give you immediate access, and some require you to restart the remote computer first. Attempt to connect to Remote Desktop to check. (If you left the MMC open, you can quickly start Remote Desktop from there.)
  8. There are several ways to do this. The simplest is to open Command Prompt and enter shutdown /i . In the dialog box that opens, select "Restart" from the drop down menu, and enter the name of the remote computer. [6] Try accessing Remote Desktop again once the computer is done restarting.
  9. Advertisement
Part 2
Part 2 of 2:

Troubleshooting

PDF download Download Article
  1. You must have administrator privileges on the remote computer.
  2. If you are trying to access the remote computer from a different network, the firewall may be blocking you. There are two routes around this:
    • If the firewall is blocking Remote Registry but not Remote Desktop, connect to a computer on the same network as the target computer, then use it to access the target computer.
    • If the firewall is blocking Remote Desktop, download PSExec from Sysinternals. Use it to gain remote access to the remote computer's command line and make a Remote Desktop exception for the firewall. [7] (Enter netsh advfirewall firewall add rule ? for instructions. [8] )
  3. Advertisement

Expert Q&A

Ask a Question
      Advertisement

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Thanks for submitting a tip for review!

      Warnings

      • Do not edit the registry if you are not familiar with it. Editing mistakes can cause permanent irreversible damage.
      Advertisement

      About This Article

      Thanks to all authors for creating a page that has been read 169,236 times.

      Is this article up to date?

      Advertisement