PDF download Download Article PDF download Download Article

Doors can start sticking for various reasons, and it’s always a hassle. The wood can swell in the hot and humid summer air, the hinges can become loose with usage, and your house can even shift and settle over time, causing changes in the frame. The key to fixing a sticking door is to determine what is causing the issue, and then you can decide if you can fix the problem with a simple trick or if you need a more intricate solution.

Method 1
Method 1 of 5:

How to Find the Problem Area

PDF download Download Article
  1. Look for scratches in the paint or any other noticeable damages to the door and frame. Also check for grime or any sticky buildup that may just need to be cleaned. Close the door and run your eyes along the gap between the door and the frame, noting places where the gap is very thin.
    • It is best to inspect an exterior door in a sunny or well-lit area.
  2. This is very useful if you can’t determine where the door is sticking by physically examining it. The paper should glide smoothly around most of the door. Wherever the piece of paper gets stuck is the problem area.
    Advertisement
  3. Try closing the door with your hands on the bottom, the side, and the top. This will allow you to feel where there is the most resistance as you close it.
  4. If the hinges are squeaking, that could be the cause for the door to stick. If you hear this, it indicates that they need to be oiled.
  5. If the door seems to be only slightly sticking, it is probably caused by changes in humidity. Wood expands when humidity increases, and shrinks when humidity decreases. [1]
    • It is important to understand this, because a door that sticks in the summer may not stick in the winter. In this case, you would try a less drastic solution, such as lightly sanding the door, or else it may be drafty and shrunken come winter.
  6. Advertisement
Method 2
Method 2 of 5:

How to Address Seasonal Sticking

PDF download Download Article
  1. This should reduce the friction and allow the door to close more smoothly. Use a dry, moisturizer-free soap that leaves a powdery residue on the sides of the door. Of course, this is a gentle and temporary solution and will need to be repeated sporadically during times of humidity.
  2. One of the functions of the AC is to remove excess moisture from the air and decrease the humidity level in your home. While this can be a costly solution, it will help with your sticking doors. As the humidity in your home is lowered, the wood door will shrink in size.
  3. If humidity causes your door to swell and stick, try running a dehumidifier in the room. [2] A dehumidifier works by sucking in air, removing the air’s moisture, and expelling the air back into the room. The main advantage of using a dehumidifier is that it is portable, which allows you to place it close to the sticking door. [3]
  4. Advertisement
Method 3
Method 3 of 5:

How to Lubricate the Hinges

PDF download Download Article
  1. When a door is opened and closed repeatedly, it’s no surprise that they can start to tarnish. Scratches and other superficial damage to the hinge can create friction and cause the door to stick. [4]
    • If you are worried about the lubricant possibly staining the door, you can take the additional step of removing the door from the frame. You can find out how to remove a door from the hinges here.
  2. Just like the lubricant can stain the door, it can stain your floor. Cover the area directly under the hinges you are working on to prevent any dripping.
  3. After you’ve done this, open and close the door a few times to work the jelly into the hinge joints.
    • WD-40 would also have the same helpful effect on your door, but it is messier and dries out faster. [5]
  4. Advertisement
Method 4
Method 4 of 5:

How to Tighten the Hinge Screws

PDF download Download Article
  1. The door may be sticking near the top or dragging at the floor. If this is the case, the screws in the hinges may have loosened over time. [6]
  2. Do not use a drill, because over-tightening the screws can cause damage to the wood and cause bigger problems. Screw it in clockwise, and work slowly to make sure you don’t tighten too much. [7]
  3. You may need to go back and tighten or loosen them. By loosening the screw you will reduce the gap between the door and the frame, and vice versa. Play around with it until it fits perfectly. [9]
    • If that didn't work, the hinges might be bent. Remove the hinge pin and use a wrench to slightly bend the hinge knuckles back so when you reinsert the pin, it pulls the door back just enough to open easily. [10]
  4. Advertisement
Method 5
Method 5 of 5:

How to Trim the Door

PDF download Download Article
  1. If you’ve checked that the screws are firmly in the hinges, the hinges are well-oiled, and determined temporary humidity is not the issue, you may need to trim your door. This is an intricate, and permanent, fix. [11]
  2. You can find out how to remove a door from the hinges here. It is important to note exactly where the door is rubbing, so that you don’t over trim your door.
  3. A block plane is a simple woodworking tool that allows you to thinly shave wood. [12] It is perfect for this task, because you can make tiny changes to the width or height of the door without causing oversized gaps between the door and frame.
    • If you’re an amateur or only have a little wood to remove from your door, you may want to try using a palm sander to do this instead.
  4. Don’t do this step until you’ve ensured that it is the correct size, or you may have to do it twice. After the paint has dried, your door will be looking- and opening- like it is brand new!
  5. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    My front door is metal and the door frame is also metal. In the winter time when it gets colder, the deadbolt is hard to lock. Is there something I can buy to spray on the frame/door/lock to help?
    Mark Spelman
    Construction Professional
    Mark Spelman is a General Contractor based in Austin, Texas. With over 30 years of construction experience, Mark specializes in constructing interiors, project management, and project estimation. He has been a construction professional since 1987.
    Construction Professional
    Expert Answer
    If you file out the deadbolt hole a little bigger, it should be a lot easier to lock and unlock your door.
  • Question
    I closed my bedroom closet door and it is now stuck closed and swollen at the top. How can I get it open?
    Mark Spelman
    Construction Professional
    Mark Spelman is a General Contractor based in Austin, Texas. With over 30 years of construction experience, Mark specializes in constructing interiors, project management, and project estimation. He has been a construction professional since 1987.
    Construction Professional
    Expert Answer
    If the door opens away from you, try getting it open by placing a block of wood on the door where it's sticking. Then use a rubber mallet to hit at the block and it should come free.
  • Question
    How do I fix a sticking door hinge?
    Gino Colucci
    Home Improvement Specialist
    Gino Colucci is a Home Improvement Specialist and the Owner of Crackerjacks Handyman Services (not a licensed contractor) in Chandler, Arizona. Crackerjacks Handyman Services offers an effective cost-saving solution for commercial and residential repair and maintenance needs, specializing in smaller projects. Crackerjacks Handyman Services carries liability insurance and all technicians go through a background check.
    Home Improvement Specialist
    Expert Answer
    First, try tightening all of the screws on the hinge in a clockwise direction, both on the door and the frame side. Another trick is to identify where it's rubbing and use longer screws to make an adjustment. If that doesn't work, remove the hinge pin and use a wrench to slightly bend the hinge knuckles back so when you reinsert the pin it pulls back the door juste nough.
See more answers
Ask a Question
      Advertisement

      Video

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Thanks for submitting a tip for review!

      About This Article

      Article Summary X

      To figure out how to unstick your door, you need to find out what the issue is first. Listen to the sound the door makes as you open and close it. If you can hear squeaking, this means that the hinges need to be oiled. Lubricate the hinges with petroleum jelly. It can also help to run a piece of heavy stock paper around the door when it’s closed. If the paper gets caught on something, this means that this is the problem area. You may need to use a palm sander to thinly shave the wood. If you can’t find a physical problem with the door, take note of the time of year. Some wooden doors expand as the humidity increases, which means that the door may stick in summer but not in winter. Apply a bar of soap to the problem area to reduce the friction and unstick the door. For more information from our Construction co-author, like how to tighten the hinges, read on!

      Did this summary help you?
      Thanks to all authors for creating a page that has been read 378,457 times.

      Reader Success Stories

      • S. Bogash

        Aug 13, 2016

        "The paper along the edge of the door really helped me locate where my door was sticking, which ended up being the ..." more
      Share your story

      Did this article help you?

      Advertisement