How to Use Logarithmic Tables

Before computers and calculators, logarithms were quickly calculated using logarithmic tables. ^{[1]
X
Research source} These tables can still be useful for quickly calculating logarithms or multiplying large numbers, once you figure out how to use them.

Method 1

Method 1 of 4:

Quick Instructions

Download Article

1
Choose the correct table. To find log _a (n), you'll need a log _a table. Most log tables are for base-10 logarithms, called "common logs." ^{[2]
X
Research source}
- Example: log ₁₀ (31.62) requires a base-10 table.
2
Find the correct cell. Look for the cell value at the following intersections, ignoring all decimal places: ^{[3]
X
Research source}
- Row labeled with first two digits of n
- Column header with third digit of n
- Example: log ₁₀ (31.62) → row 31, column 6 → cell value 0.4997.
Advertisement
3
Use smaller chart for precise numbers. Some tables have a smaller set of columns on the right side of the chart. Use these to adjust answer if n has four or more significant digits:
- Stay in same row
- Find small column header with fourth digit of n
- Add this to previous value
- Example: log ₁₀ (31.62) → row 31, small column 2 → cell value 2 → 4997 + 2 = 4999.
4
Prefix a decimal point. The log table only tells you the portion of your answer after the decimal point. This is called the "mantissa." ^{[4]
X
Research source}
- Example: Solution so far is ?.4999
5
Find the integer portion. Also called the "characteristic". By trial and error, find integer value of p such that $a^{p}<n$ and $a^{{p+1}}>n$ .
- Example: $10^{1}=10<31.62$ and $10^{2}=100>31.62$ . The "characteristic" is 1. The final answer is 1.4999
- Note how easy this is for base-10 logs. Just count the digits left of the decimal and subtract one.

Method 2

Method 2 of 4:

In-Depth Instructions

Download Article

1
Understand what a logarithm is. 10 ² is 100. 10 ³ is 1000. The powers 2 and 3 are the base-10 logarithms of 100 and 1000. ^{[5]
X
Research source} In general, a ^b = c can be rewritten as log _a c = b . So, saying "ten to the power of two is 100" is equivalent to saying "the base-ten log of 100 is two." Each logarithmic table is only usable with a certain base ( a in the equation above). By far the most common type of log table uses base-10 logs, also called the common logarithm.
- Multiply two numbers by adding their powers. For example: 10 ² * 10 ³ = 10 ⁵ , or 100 * 1000 = 100,000.
- The natural log, represented by "ln", is the base-e log, where e is the constant 2.718. This is a useful number in many areas of math and physics. You can use natural log tables in the same way that you use common, or base-10, log tables.
Let's say you want to find the base-10 log of 15 on a common log table. 15 lies between 10 (10 ¹ ) and 100 (10 ² ), so its logarithm will lie between 1 and 2, or be 1.something. 150 lies between 100 (10 ² ) and 1000 (10 ³ ), so its logarithm will lie between 2 and 3, or be 2.something. The .something is called the mantissa; this is what you will find in the log table. What comes before the decimal point (1 in the first example, 2 in the second) is the characteristic.
3
Slide your finger down to the appropriate row on the table using the leftmost column. This column will show the first two or, for some large log tables, three digits of the number whose logarithm you're looking up. If you're looking up the log of 15.27 in a normal log table, go to the row marked 15. If you're looking up the log of 2.57, go to the row marked 25.
- Sometimes the numbers in this row will have a decimal point, so you'll look up 2.5 rather than 25. You can ignore this decimal point, as it won't affect your answer.
- Also ignore any decimal points in the number whose logarithm you're looking up, as the mantissa for the log of 1.527 is no different from that of the log of 152.7.
This column will be the one marked with the next digit of the number whose logarithm you're looking up. For example, if you want to find the log of 15.27, your finger will be on the row marked 15. Slide your finger along that row to the right to find column 2. You will be pointing at the number 1818. Write this down.
If your log table has a mean difference table, slide your finger over to the column in that table marked with the next digit of the number you're looking up. For 15.27, this number is 7. Your finger is currently on row 15 and column 2. Slide it over to row 15 and mean differences column 7. You will be pointing at the number 20. Write this down.
For 15.27, you will get 1838. This is the mantissa of the logarithm of 15.27.
Since 15 is between 10 and 100 (10 ¹ and 10 ² ), the log of 15 must be between 1 and 2, so 1.something, so the characteristic is 1. Combine the characteristic with the mantissa to get your final answer. Find that the log of 15.27 is 1.1838.

Method 3

Method 3 of 4:

Finding the Anti-Log

Download Article

1
Understand the anti-log table. Use this when you have the log of a number but not the number itself. In the formula 10 ⁿ = x, n is the common log, or base-ten log, of x. If you have x, find n using the log table. If you have n, find x using the anti-log table.
- The anti-log is also commonly known as the inverse log.
This is the number before the decimal point. If you're looking up the anti-log of 2.8699, the characteristic is 2. Mentally remove it from the number you're looking up, but make sure to write it down so you don't forget it - it will be important later.
In 2.8699, the mantissa is .8699. Most anti-log tables, like most log tables, have two digits in the leftmost column, so run your finger down that column until you find .86.
For 2.8699, slide your finger along the row marked .86 to find the intersection with column 9. This should read 7396. Write this down.
If your anti-log table has a table of mean differences, slide your finger over to the column in that table marked with the next digit of the mantissa. Make sure to keep your finger in the same row. In this case, you will slide your finger over to the last column in the table, column 9. The intersection of row .86 and mean differences column 9 is 15. Write that down.
In our example, these are 7396 and 15. Add them together to get 7411.
Our characteristic was 2. This means that the answer is between 10 ² and 10 ³ , or between 100 and 1000. In order for the number 7411 to fall between 100 and 1000, the decimal point must go after three digits, so that the number is about 700 rather than 70, which is too small, or 7000, which is too big. So the final answer is 741.1.

Method 4

Method 4 of 4:

Multiplying Numbers

Download Article

We know that 10 * 100 = 1000. Written in terms of powers (or logarithms), 10 ¹ * 10 ² = 10 ³ . We also know that 1 + 2 = 3. In general, 10 ^x * 10 ^y = 10 ^{x + y} . So, the sum of the logarithms of two different numbers is the logarithm of the product of those numbers. We can multiply two numbers of the same base by adding their powers. ^{[6]
X
Research source}
Use the method above to find the logarithms. For example, if you want to multiply 15.27 and 48.54, you would find the log of 15.27 to be 1.1838 and the log of 48.54 to be 1.6861.
In this example, add 1.1838 and 1.6861 to get 2.8699. This number is the logarithm of your answer.
You can do this by finding the number in the body of the table closest to the mantissa of this number (8699). The more efficient and reliable method, however, is to find the answer in the table of anti-logarithms, as described in the method above. For this example, you will get 741.1.

Community Q&A

Search

Add New Question

Question

How do I find the log of a cube?

Donagan

Top Answerer

Triple the log of the number that has been cubed.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 16 Helpful 76
Question

How do I find logs for 3.14?

Community Answer

Multiply 3.14 with 10 to get 31.4, then find log (31.4), which is roughly 1.4969. Now, divide this by 10 to get your log with base 10.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 27 Helpful 70
Question

How do I find the log of a single digit?

Community Answer

Say you want to find the log of 9. You know that 9 = 9.0 = 9.00 and so on. Now that you have the correct number of significant digits, you can use a log table as long as you deal with decimal points correctly.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 49 Helpful 83

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Video

Tips

Always do the calculations on a sheet of paper and not mentally, as these are large and complicated numbers and they can get tricky.

Thanks
Helpful 6 Not Helpful 0
Read the page heading carefully. A log book has about 30 pages and using the wrong page will give the wrong answer.

Thanks
Helpful 7 Not Helpful 2

Tips from our Readers

The advice in this section is based on the lived experiences of wikiHow readers like you. If you have a helpful tip you’d like to share on wikiHow, please submit it in the field below.

You can always cross check with calculator operations to see if you're on the right track.

Submit a Tip

All tip submissions are carefully reviewed before being published

Name

Please provide your name and last initial

Submit

Thanks for submitting a tip for review!

Warnings

Most tables are only accurate to three or four digits. If you find the anti-log of 2.8699 using a calculator, the answer will round to 741.2, but the answer you get using log tables is 741.1. This is due to rounding in the tables. If you need a more precise answer, use a calculator or another method rather than log tables.

Thanks
Helpful 3 Not Helpful 0
Make sure that the readings are from the same row. Sometimes, we may mix up rows and columns because of the small size and close spacing.

Thanks
Helpful 2 Not Helpful 1
Use the methods described in this article for common log, or base-ten log, tables, and make sure the numbers you're looking up are in base-ten format, or scientific notation.

Thanks
Helpful 3 Not Helpful 3

Things You'll Need

logarithmic table or log book
spare sheet of paper.

[1]

[2]

[3]

[4]

[5]

[6]

Log in

How to Use Logarithmic Tables

Steps

Quick Instructions

In-Depth Instructions

Finding the Anti-Log

Multiplying Numbers

Community Q&A

Video

Tips

Tips from our Readers

Warnings

Things You'll Need

You Might Also Like

References

About This Article

Reader Success Stories

Did this article help you?

Quizzes

You Might Also Like

Featured Articles

Trending Articles

Featured Articles

Featured Articles

Watch Articles

Trending Articles

Quizzes

Explore Categories