How to Use Prepackaged Concrete Mix

PDF download Download Article
PDF download Download Article

For very small concrete projects like sidewalk or driveway repairs, bags of premixed concrete can be a money saving alternative to buying Ready-Mixed bulk concrete. This product, available in bags of dry blended material can be purchased in home improvement and building supply stores in many areas.

Steps

PDF download Download Article
  1. Multiply the length times the width times the depth of the space you need to fill. This will tell you give a cubic size, or volume, of concrete that you need. Next, divide the volume (in cubic feet, meters, etc.) by the package yield of the material you are using. [1] Typically, premixed concrete comes in 20, 40, and 80 pound bags, with the 80 pound bag yielding about 0.6 cubic foot of concrete.
  2. Place any reinforcing steel, and generally speaking, be ready for your concrete.
    • Rebar is a good option if you're planning to pour concrete for a driveway.
    Advertisement
  3. Here are a few examples of different mixtures commonly available:
    • 3000 PSI (pounds per square inch) compressive strength, gravel, sand, and Portland cement mixture. This is a basic, inexpensive concrete suitable for most repairs, as well as for setting posts and poles.
    • 4000 PSI mixture is for repairing or building structural concrete like sidewalks or driveways, where extra strength will increase the durability of the finished surface.
    • 5000 PSI quick-setting concrete is a very strong mixture with a higher ratio of Portland cement to fine and coarse aggregates, typically used where quick-setting is desirable and higher strength may be needed.
    • Sand mix contains no gravel or stone (coarse aggregate) and is used for grouting or topping, where a smoother surface is desired.
    • Other mixes include premixed mortars, non-metallic non-shrink grouts and high-strength early (high early) concrete . These are specialty mixes for specific purposes not covered in this article.
  4. See "Things You'll Need" below for a complete list, but these will include your dry concrete mix, clean water, a shovel, and a container for mixing.
  5. Wheelbarrows (as in the pictures) are ideal for mixing small quantities of concrete. [2] Avoid spilling the dry material on finished surfaces or lawn grasses, and keep upwind if possible to avoid breathing dust from this product.
  6. This will act as a reservoir for the water you add. [3] Pour one gallon of water for each 80 pounds of dry mix into the depression. Don't worry about overflow or splashing, because all the container's contents must be mixed completely before the concrete is used.
  7. The Portland cement, the key ingredient in concrete, is introduced to standing water, initiating hydration, not the reverse. Makes mixing with a shovel simpler and easier. Just the action of pouring mix in the water commences the hydration process without lifting a shovel. The trick is how much water per bag to add.
  8. The ratio is usually 1 gallon (3.8 L) per 80lb bag. But 1/5th of a 5 gallon (18.9 L). pail is hard to mix with 80lb of Portland cement, aggregate and admixture by hand shovel in a wheelbarrow. In revolving cement mixers, this is easy. With a shovel you end bulldozing through semi-rigid stubborn admixture that doesn't want to move. One way is to start by pouring two gallons in the barrow, dump the first bag in, mix completely into slurry, then add bag number two, assuming physically strong enough to maneuver the resultant weight. If not, pour a half 80lb bag into 1 gallon (3.8 L), mix thoroughly, then add the remainder, mixing thoroughly.
  9. [4] Plunging the shovel in the mix atop the water at the barrow's rounded front and paddling backward, scooping cement and carrying it back and dumping in the front to come in contact with water. All the shoveling is to bring the concrete mix in contact with water for the water and cement chemical interaction to do the rest. Repeating the paddling step over and over, as many times as it takes, until every speck of mix contacts water (usually about two to three minutes steady Eddie), as in cannot find any dry mix hiding along the bottom, sides or anywhere. You know it's fully mixed when you can grab a handful that won't keep its form after squeezed into a ball but yet isn't soupy. If forms a ball = too dry. If runs = too much water. The proper mixture for strongest concrete resides between dry and runny and ascertained by experience. The strongest is 0.45 water unit per Portland cement unit.
  10. Add additional water until the concrete is as plastic as you want it to be for your project. [5] You should avoid making the concrete too thin, or soupy , as excess water will weaken the finished concrete, and will also allow the aggregates to separate out of the mix.
  11. Concrete hardens through the process of hydration , so continuing to mix the material will insure the reaction will occur completely.
  12. Place your concrete into your form , smoothing the surface with a shovel or other tool so any additional concrete you need to finish the job can be easily estimated. [6]
  13. [7] You may want to pat the concrete with your finishing tool to compact the material, removing any voids or air pockets which have formed as you placed it.
  14. Finish the concrete according to your own requirements or the requirements of the project design.
  15. Barricade the area around the concrete to prevent passersby from stepping into it (which could ruin your finished project) and allow it to set and cure. Clean and put away your tools, clean up the area, and remove the empty bags when you are finished.
  16. The technique to properly cure horizontal poured concrete, so will set over time to maximum strength and integrity, is to prevent the water added and mixed with the concrete in the barrow from evaporating away from the newly poured and troweled slab or other surface. .
  17. An alternative to mixing with a shovel and wheelbarrow is to mix in a standard five gallon bucked using a mixing drill with a "whip" attachment. This is best suited for mortar mixes but works with concrete mixes also. Fill a buck just less than 1/3 with water and add an entire 30kg bag of prepackaged concrete and mix.
    18. Advertisement

Community Q&A

Search
Add New Question
  • Question
    Can you pour dry mix into the hole and top it off with water from a hose instead of mixing it in a wheelbarrow?
    Community Answer
    Yes, however you run the risk of overfilling the hole, plus you wont be able to mix it as well.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 3 Helpful 6
  • Question
    Can you put the dry mix in the form and add water to the top, then let it soak through? With this method, the dry mix would be leveled first, and the water carefully added to the top to soak through.
    Community Answer
    I wouldn't suggest doing it this way, as the water wouldn't thoroughly activate the Portland cement. You would end up with a non-uniform slab of concrete that would deteriorate more quickly than one that used properly mixed concrete.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 2 Helpful 6
  • Question
    When setting a post, does it work to place regular QUIKRETE concrete mix in the hole, then dump in water?
    Community Answer
    If the pole is relatively short and doesn't carry much load, that shouldn't be a problem. However, taking the time to mix the concrete in a wheelbarrow, then pouring it gives you a more durable, long-lasting result.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 2 Helpful 5
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      • Have a plan and a place to rid yourself of any excess concrete.
        Thanks
        Helpful 0 Not Helpful 0
      • If you have (physically strong) assistance, bag concrete can also be mixed and poured easily from a strong tarp, pour dry mix onto the tarp, pour water into the depression (as above), then with your helper, pick up the 4 corners and shake and roll the mix until it blends (90 seconds or so). This method requires holding a hefty amount of weight up in the air for a while, but many people find it is a very quick and easy method.
        Thanks
        Helpful 0 Not Helpful 0
      • Have a good water source ready before you begin. This will allow you to mix all your material, clean up tools, and clean up any spills that occur while you work.
        Thanks
        Helpful 0 Not Helpful 0
      Show More Tips
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • Use a dust mask or respirator, safety glasses, and chemical resistant gloves when using concrete.
        Thanks
        Helpful 5 Not Helpful 4
      • Concrete can burn your skin if it sticks to it. Therefore, always cover up your skin by wearing long sleeved tops, trousers, and suitable gloves.
        Thanks
        Helpful 6 Not Helpful 8
      • Concrete mixtures can set up more rapidly than expected, so be prepared, and get help if needed.
        Thanks
        Helpful 5 Not Helpful 6
      Advertisement

      Things You'll Need

      • Premixed concrete mix
      • Shovel
      • Container for mixing
      • Finishing tools
      • Clean water
      • Safety equipment

      You Might Also Like

      How to
      Make Concrete
      How to
      Finish Concrete
      How to
      Build a Straight Form for Concrete
      How to
      Drill Into Concrete
      How to
      Hang Pictures & Artwork on a Concrete Wall
      How to
      Make Cement
      How to
      Tie Rebar
      How to
      Mix Cement
      How to
      Pour Concrete
      How to
      Bolt Into Concrete
      How to
      Adhere Concrete to Concrete
      How to
      Add Concrete to Existing Concrete
      The Best and Safest Way to Cut Cement Backer Board
      How to
      Cut Cinder Block
      Advertisement

      References

      1. ↑ https://www.concretenetwork.com/concrete/howmuch/calculator.htm
      2. ↑ https://www.familyhandyman.com/masonry/pouring-concrete/how-to-properly-mix-concrete/
      3. ↑ https://www.bobvila.com/articles/how-to-mix-concrete/
      4. ↑ https://www.familyhandyman.com/masonry/pouring-concrete/how-to-properly-mix-concrete/
      5. ↑ https://www.bobvila.com/articles/how-to-mix-concrete/
      6. ↑ https://www.popularmechanics.com/home/how-to/a5638/2784971/
      7. ↑ https://www.popularmechanics.com/home/how-to/a5638/2784971/

      About This Article

      In other languages
      Thanks to all authors for creating a page that has been read 320,958 times.

      Did this article help you?

      Advertisement