PDF download Download Article
Secure your cargo safely and quickly with this simple guide
PDF download Download Article

Ratchet straps are fasteners used to secure cargo during transport. When used correctly, these straps can support many different weights and cargo sizes. In order to properly use your ratchet straps, thread the strap through the mandrel and then crank the ratchet to tighten it. To release the strap, press the release tab and open the ratchet.

How to Use Ratchet Tie Down Straps

  1. Open the ratchet fully so it sits flat.
  2. Slide the end of the strap through the open slot in the ratchet mechanism.
  3. Double-over the end of the strap.
  4. Feed the strap back over the top of the ratchet mechanism.
  5. Pull the strap taut.
  6. Pull the ratchet handle back and forth to tighten the strap.
  7. Push the ratchet handle down all the way until it clicks to lock the strap.
Part 1
Part 1 of 3:

Threading a Ratchet Strap

PDF download Download Article
  1. The release catch, also known as the release lever, is a smaller handle that disengages the ratcheting handle. It’s located in the center of the top movable piece of the ratchet. Pull up the release catch and flip the ratchet fully open. Set the open ratchet on a table before you so that the spiked wheels (cogs) are facing upwards. [1]
    • Does the handle move freely without pressing the release catch? If so, you unlock your ratchet by opening it all the way so that the handle is perfectly in line with the portion of the ratchet attached to the strap.
    • Note: The “strap” part of the ratchet strap is the side with only fabric. The “ratchet” refers to the side with the actual locking mechanism. [2]
  2. The key part of the ratchet strap system is the mandrel. The mandrel refers to the two metal strips at the bottom of the ratchet where the two metal components meet. To thread the strap, slide the fabric through the opening in the middle of the mandrel. [3]
    • Pro tip if you’re loading a truck or trailer: Put a single twist in the strap before feeding it through the mandrel so that the topside of the strap on one side is the underside of the strap on the other side. This will capture a bit of the wind and keep the strap from sliding off the item. [4]
    Advertisement
  3. Once you’ve threaded the strap through the middle of the mandrel, flip the end of the strap over. Pull this end back through the ratchet using the slot in between the top of the mandrel and the bottom of the release catch. [5]
    • The strap should now be doubled over on the strap side of the ratchet strap.
  4. Remember that you can always tighten the entire thing using the ratchet later, so don’t worry if you’ve got slack in your strap. [6]
    • If you need help picturing what’s going on here, the strap is now wrapped around the top bar of the mandrel in a U-shape. When you eventually tighten the strap using the ratchet, the mandrel will spin and bundle up all the excess strap fabric to make everything taut.
  5. Advertisement
Part 2
Part 2 of 3:

Tightening the Strap

PDF download Download Article
  1. Ratchet straps can easily secure cargo in a truck bed, moving van, or wherever you need to tie something down. Move your cargo where you want it to stay, then place the ratchet strap across your cargo. Loop the S-hooks anywhere where they’ll stay in place. [7]
    • There are typically dedicated hooks or grooves for ratchet straps in truck beds and van walls.
    • You can also hook the S-hooks to themselves. Simply wrap the ends of the ratchet straps entirely around your cargo and connect the two S-hooks together.
    • To hold multiple objects together and keep them in place, you’ll need two ratchet straps. Use one strap to secure the objects together and the other strap to wrap around them.
  2. Pull the ratchet back and forth to shorten the length of the strap through and tighten it. Once it feels taut and secure around your cargo, stop ratcheting. Tug at the strap and check it for give—it should feel tight and secure. [8]
    • Be careful not to over-tighten. Too much pressure could damage your ratchet strap or your cargo.
  3. The ratchet is unlocked when it is laid flat in a straight line, and locked when it is folded on top of itself. Flip the ratchet into the closed position by applying pressure until you hear a click. This means that the strap is locked into place and should hold your cargo securely. [9]
    • If you don’t hear the click, tug on the strap and buckle to make sure it’s secure. If it comes loose, you may have a faulty ratchet strap.
  4. Advertisement
Part 3
Part 3 of 3:

Releasing the Strap

PDF download Download Article
  1. This will override the ratcheting function and release the lock. The release tab should be easy to access and located on the top of the ratchet. [10]
    • If you can’t locate the release tab, check your ratchet strap’s operation instruction manual.
    • Don’t see a release tab? Some ratchet straps don’t have a manual unlocking feature. To unlock these straps, simply push down on the handle and pull the handle up.
  2. Flip the ratchet completely open so it lays flat, then pull on the non-fixed side of the strap. This will release the strap from the ratchet’s hold and allow you to completely remove it. [11]
  3. Locate the release tab once again and hold it down while you flip the ratchet closed. This will keep the ratchet in the locked position until it is ready to be used again. If you don’t have a release tab, just close the strap until you hear a click.
  4. Advertisement

Expert Q&A

Ask a Question
      Advertisement

      Video

      Tips

      • Ratchet straps are rated by their weight capability, ranging from a light strap for 300 pounds (140 kg) to a heavy-duty strap that can support up to 10,000 pounds (4,500 kg). Make sure to weigh your cargo so you can choose the correct straps to support it. [12]
      • Ratchet straps also have a wide variety of sizes and end fittings to secure many different sizes loads. Choose the length you’ll need and the type of hardware that will work best, such as flat hooks, snap hooks, wire hooks, grab hooks, s-hooks, and more.
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • Always inspect the straps for signs of wear before using them. Do not use a strap that has fraying, abrasive wear, broken or worn-down stitching, tears, cuts, or defective hardware.
      Advertisement

      About This Article

      Article Summary X

      To use ratchet straps, start by using the release catch to open the ratchet, then thread the strap through the bottom of the ratchet until it feels taut. Next, place the ratchet strap across your cargo and hook the ends over the side of the truck bed to secure the cargo in place. Then, pull the ratchet back and forth to tighten the strap. Once it feels taut and secure around your cargo, stop ratcheting and lock the strap securely! For tips on using ratchet straps to secure to large items together, read on!

      Did this summary help you?
      Thanks to all authors for creating a page that has been read 1,509,397 times.

      Reader Success Stories

      • Christopher Coomber

        Mar 29, 2023

        "I have two of these ratchet straps and a number of smaller ones but I could never get them to work so the strap was ..." more
      Share your story

      Did this article help you?

      Advertisement