Download Article
An easy beginner’s guide to successful wood joinery with a biscuit joiner
Download Article
A biscuit joiner, also known as a plate joiner, is an electric woodworking tool. It joins two pieces of wood together without staples, nails, or screws. A biscuit joiner uses a small blade (4 inches or 101.6 millimeters) to cut a crescent shaped hole in the opposite edges of two pieces of wood. An oval wooden "biscuit" is covered with glue, placed in the slot, and the two boards are clamped together to form a joint. This simple process creates tight, smooth, and seamless joints. To get the results you want in woodworking, you need to know how to use a biscuit joiner.
Steps
Download Article
-
Align the pieces of wood you want to join.
-
Make marks at the places where biscuits will be placed.
- Use as many biscuits as needed to secure the pieces of wood.
Advertisement -
Mark the other piece of wood at the same locations.
- The biscuit process allows some leeway in aligning the pieces of wood, so perfect alignment is unnecessary.
-
Use the settings and stops on the biscuit joiner to set the depth of the cut.
-
Place the joiner firmly on the pencil markings.
-
Turn on the joiner and push it forward to cut a crescent shape into the wood.
- Apply pressure to release the blade, allowing it to cut the wood.
- The joiner's cutting blade will retract while it is idle.
- The crescent shaped slots may be longer and larger the joiner biscuit; this allows a user to better align the joined pieces just before the glued joiner biscuit starts to set.
-
Cut slots at each location on each piece of wood.
-
Cover each biscuit with wet wood glue or apply glue inside the slots.
-
Slip a biscuit into each one of the slots at each location.
-
Clamp the two pieces of wood firmly with wood clamps.
- Upon being clamped, the compressed biscuit will expand to fill the crescent shaped slot and create a strong bond between the two pieces as it dries.
-
Wipe away any excess glue before it dries.
-
Clean the joiner according to product directions before storing when not in use.
Advertisement
Community Q&A
Search
-
QuestionDoes the blade have vertical movement for different wood thickness?Dean VCommunity AnswerYes. You will want to align/center the cutter to the thickness of the wood you are using. The adjustment is at the side of the fence. Check during your progress to make sure the setting hasn't changed.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Tips
- Because they are made of compressed wood, biscuits need to be stored in tight dry containers, or they will absorb moisture and swell.Thanks
- Practice placing your components before gluing to make sure everything fits.Thanks
- The biscuit is usually made of compressed wood.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Thanks for submitting a tip for review!
Advertisement
Warnings
- If the joiner is burning or smoking the wood in the slots, it is time to sharpen or replace the blade.Thanks
- Wear goggles and a dust mask when working with a biscuit joiner.Thanks
Advertisement
Things You'll Need
- Wood glue
- Wood clamps
- Biscuits come in three sizes:
- 0 - 5/8 inch wide x 1-3/4 inches long (13 mm x 44.45 mm); #10 - 3/4 inch wide x 2-1/8 inches long (19.05 mm x 2 mm); #20–1 inch (50.8–2.5 cm) wide x 2-3/8 inches long (25.4 mm x 2.38 mm). Biscuits are .148 inches (3.76 mm) thick.
Expert Interview
Thanks for reading our article! If you’d like to learn more about carpentry, check out our in-depth interview with Matt Mimnagh .
About This Article
Thanks to all authors for creating a page that has been read 50,198 times.
Advertisement
80%
of readers found this article helpful
.
Click a star to add your vote
% of people told us that this article helped them.
