PDF download Download Article PDF download Download Article

Sherpa is a heavyweight fabric designed to look like shearling or wool, though it is made from a synthetic material. If you have a jacket made of sherpa, it is easy to maintain with regular laundering and proper washing and drying techniques. You can use your washing machine's gentle cycle to clean the entire jacket or quickly spot-clean small stains. After cleaning it, it's best to air-dry your sherpa jacket rather than put it in your dryer.

Method 1
Method 1 of 3:

Using a Washing Machine

PDF download Download Article
  1. Depending on the fabric, the style, and the manufacturer of the jacket, there may be special instructions for how to wash the garment. Before washing, see if the tag includes any information that might affect typical laundry care, such as warnings or extra steps.
  2. If your jacket has a stain, pour a small amount directly onto it and spread the soap around so that the stained area is fully covered. After about 10 minutes have passed, gently dab the stain with a paper towel to absorb the residue.
    • Dish or hand soaps work well for removing stains. If you have a stain remover, you can use that, too, by following the directions on its label.
    • Don't rub the stain with a towel as this will just spread the stain deeper into the fabric.
    Advertisement
  3. Though it may seem like a hassle, to best preserve the fabric you should wash the jacket by itself. [1]
    • If you cannot wash the jacket without other articles of clothing or fabrics, try to wash similar fabric styles to sherpa (faux fur, shearling, etc.) with the jacket instead of other fabric materials.
  4. Do not use a detergent that contains fabric softeners, bleach, or chlorine. These ingredients can ruin the softness of the sherpa.
  5. If your washing machine has a setting for delicates, use that option. [2] The water should be set to the machine's coldest setting as warm or hot water will most likely damage the sherpa fabric.
  6. Advertisement
Method 2
Method 2 of 3:

Drying the Jacket

PDF download Download Article
  1. Set up the rack in a part of your home that gets the most sun and has good air flow. [3] Place the jacket onto the drying racket so that it is as flat as possible, which will prevent creasing and denting in the fabric. [4]
  2. Air-drying is the best way to dry delicate clothes, as it doesn't cause the same wear and tear that a dryer would. The exact amount of time your garment will take to air-dry will vary based on several factors, such as humidity, temperature, and how effective the spin cycle on your washer is.
    • Check on the jacket every hour or so to see if it has dried or still needs a bit longer.
  3. If your dryer has a setting for delicates, use this option. Otherwise, you should run a tumble drying cycle. Make sure that the heat setting is low, as high or even medium heat levels could damage the fabric materials.
  4. Run your fingers through the fabric to loosen it and get rid of any clumps. This will help keep your sherpa feeling soft and can prevent matting. [5]
    • Never use an iron on sherpa. Doing so will damage the fabric and can cause it to fall out of the garment.
  5. Pilling and matting will inevitably start to happen to your sherpa after you wash it. To get rid of it, use a small razor to shave upwards, against the "grain" of the fabric. Start out very gently, and add pressure only if you need.
    • After you've accumulated a pile of pills, use a piece of tape to get the balls of pilling off of the jacket.
  6. Advertisement
Method 3
Method 3 of 3:

Spot-Cleaning a Stain by Hand

PDF download Download Article
  1. If the stain is fresh, you should start out by dabbing the stained area with a paper towel or other clean cloth, which will absorb some of the liquid. Never rub the stain with a paper towel or cloth.
    • Rubbing will only cause the stain to set deeper into the fabric, making it harder to get out.
  2. Lay the jacket onto a flat surface. Pour a bit of soap or stain remover onto the stained area and spread it around so that the entire stain is covered by a thin layer of the soap or stain remover. [6]
    • You should try to limit how often you wash a sherpa jacket to keep the material in good shape. If you only have a small stain to deal with, it's best to spot-clean rather than wash the entire garment.
  3. Use an old toothbrush with soft bristles or a soft sponge to prevent damage to your sherpa. Scrub the surface of the material using small circles to remove the stain and the soap.
  4. Rinse the stained area completely with fresh water so that no soap residue is left behind. You only need to wet the stained area to rinse the sherpa. Avoid getting the rest of the material wet unless there's no way around it. [7]
    • As with a washing machine, warm water can damage the fabric, so make sure the water is cool to the touch before you start to wash the jacket.
  5. Do not put it in the dryer, as this could cause any residue still on the jacket to set and make the stain harder to get out. If the stain remains after the jacket is dry, you can use the same process to pretreat the jacket before tossing it in your washing machine.
  6. Advertisement

The Takeaway: Cleaning a Sherpa Jacket

Wash sherpa in your washing machine with gentle detergent on a cool, gentle cycle. Hang up or air-dry sherpa once it's washed, or stick it in your dryer using a very gentle tumble cycle.

Expert Q&A

Ask a Question
      Advertisement

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Thanks for submitting a tip for review!

      Things You'll Need

      • Mild liquid soap
      • Gentle detergent
      • Washing and drying machines
      • Drying rack or clothesline

      About This Article

      Thanks to all authors for creating a page that has been read 70,042 times.

      Did this article help you?

      Advertisement