How to Weld Aluminum

PDF download Download Article
PDF download Download Article

Welding is the process of joining 2 metal components by melting them together. Welding any material is a challenging process, but welding lightweight metals like aluminum requires the utmost precision to ensure a strong bond. Knowing how to weld aluminum is a matter of assembling the right tools, exercising caution and patience, and gaining experience. First assemble your materials, practice the welding motion, and then set up your work space.

Things You Should Know

  • To meld aluminum, you'll need a TIG (tungsten inert gas) welder with AC capability.
  • You'll also need aluminum filler rods (to bond the pieces of aluminum together) and a canister of argon gas.
  • Work in a well-ventilated, cool area. You should also wear a welding helmet, thick gloves, longe sleeves, and a respirator.
Part 1
Part 1 of 4:

Assembling Your Materials

PDF download Download Article
  1. This is a type of welder that uses a tungsten electrode and an inert gas to shield the welding area. [1] The precision achieved with this type of welder is crucial when working with aluminum, especially thin pieces. [2]
    • TIG welders are expensive, so consider contacting a local welding supply store or home hardware outlet about rental possibilities.
    • It’s possible to weld aluminum with other welding processes, such as MIG welding, but TIG welding is the method most suitable for beginners.
  2. This tool is needed in order to bond the 2 pieces. Try to avoid using rusty or dirty filler rods, as these will lead to weaker welds.
    • You can find aluminum filler rods at hardware or home improvement stores, such as Harbor Freight or Home Depot.
    • Opt for either a 4043 or 5356 alloy. [3]
    • Use a filler rod that is equal in size to the tungsten electrode. [4]
    Advertisement
  3. Argon’s purpose in the welding process is to shield. Pure argon is a cost-effective gas solution. 3% helium can be added to increase arc stability. [5]
    • Gas needs to be acquired from authorized gas dealers. Most welding supply stores will be able to provide gas or refer you to an outlet that can.
    • If you’re renting the TIG welder, purchase your argon canister when you pick up the welder.
  4. Wear a shirt with long sleeves made from a thick fabric. TIG welding produces a large amount of ultraviolet radiation. Because of this, you will get burns along your arms if you weld in short sleeves.
    • Try to find a shirt that is made of 100% cotton.
    • Make sure that your pants do not have cuffs that can catch molten metal.
  5. Make sure to wear a heavy welding helmet, a thick pair of gloves, and a respirator to protect yourself while welding. This equipment will protect you from intense light, radiation, chemical burns, fumes, oxides, electric shock, and more. [6]
    • Your welding gloves should be insulated and fire-resistant.
    • Keep a fire extinguisher easily accessible in case of any stray sparks.
    • Try to use a helmet with a lens that automatically darkens during the welding process. The lens should be rated at 10-13 shade.
  6. 6
    Do a safety check on all your equipment. Using damaged, broken, or improperly set-up welding equipment can be very dangerous. A quick safety check can prevent injury or even save your life. Before you get started, take a few moments to:
    • Double check all hoses and connections.
    • Check for and replace any cracked or corroded parts.
    • Replace any dented or rusted tanks.
    • Check your wires and cords and fix any that are frayed or nicked.
    7. Advertisement
Part 2
Part 2 of 4:

Setting up the Work Space

PDF download Download Article
  1. Over time, aluminum forms a thin coat of aluminum oxide on its exterior, which melts at a much higher temperature than aluminum. So, before welding any piece of aluminum, you have to clean away the aluminum oxide. Do this mechanically by wire-brushing, grinding, or filing away the oxides. [7]
    • If you use wire brushes to clean the aluminum, make sure to use brushes that are new or have only been used to clean aluminum. Brushes that have been used to clean other metals may leave traces of those metals behind, which can affect the quality of your weld.
    • Spray the joints with electrical cleaner. Rinse the work piece in water, and then allow it to dry thoroughly. Scrub the aluminum with a stainless steel wool scrubber, such as a Scotch Brite scrubbing pad, to finish the cleaning process.
  2. A dirty filler rod can contaminate the weld just as easily as a dirty work piece. Use an abrasive cleaning pad and some acetone to ensure that the rod is contaminant free.
  3. TIG welders will be unforgiving if the joint is not fitted very tightly; you may be left with gaps in the joint. Make the workpieces fit together as tightly as possible by filling them before clamping them together with clamps or vise grips.
    • If you can, suspend the area you will be welding above the table. This will make the heat transfer more effective and create better weld penetration.
    • Consider clamping the workpiece to a heat sink, such as copper. This will ensure that the heat from the weld will transfer safely without warping your work or damaging anything else in your workspace. [8]
  4. Aluminum is much easier to weld when the work is already much hotter than room temperature. You can heat the workpiece by putting it directly in an oven, or you can use a propane torch to apply heat to the surface. Aim for a temperature between 300°F and 400°F (149-204°C).
    • When welding thick pieces of aluminum, welding without preheating can lead to a very weak, shallow bond.
  5. As you get ready to start welding, first make sure there’s a fire extinguisher nearby in case a fire starts during the welding process. It’s also important to work in a space below 77° Fahrenheit (25° Celsius) that has good airflow in order to prevent heat stress and/or inhalation of dangerous fumes.
    • You can also ensure protection from fumes by using welding fume extractor machines. [9]
    6. Advertisement
Part 3
Part 3 of 4:

Practicing the Welding Motion

PDF download Download Article
  1. For practice, keep the torch unlit to save metal. While placing the base of your gloved hand on the table for support, hold the torch at a slight angle, tilting back about 10°. Hold the tip of the tungsten about ¼ inch (6.4 mm) away from the aluminum.
    • If you pull the tip too far away, it will cause the arc to spread too much and the weld will become difficult to control. [10]
  2. You will lead the weld with the filler rod, which should be held at about a 90° angle to the torch tip. The torch should always be pushed and not dragged.
    • If the filler and the tip come into contact, your weld will be contaminated and lose structural integrity. [11]
  3. With the torch in proper position, practice moving your hand along the part of the aluminum that you will be welding. Practice with gloves on to simulate the amount of effort required. Make sure to move your entire hand, as getting in the habit of using just your fingers is very limiting. [12]
    4. Advertisement
Part 4
Part 4 of 4:

Welding the Metal

PDF download Download Article
  1. Aim to use about 1 amp per 0.001 inch (0.025 mm) of the workpiece's thickness. [13] It is a good idea to set the welder's amperage to higher than you expect to need and then tone the current back with the foot pedal.
    • If you don’t have a lot of experience with welding, practice with some scrap aluminum and try different settings until you find what works best for you. Getting the settings right can make a big difference in the quality of your weld, and environmental factors can affect which setting works best.
  2. Begin by extending the tungsten electrode no more than the diameter of the torch’s nozzle. For example, if you are using a ¼ inch (6.4 mm) wide nozzle, your tungsten tip should extend no more than ¼ inch (6.4 mm) from the nozzle. Tap the electrode tip against the workpiece and then pull it away about â…› inch (3 mm).
  3. If there’s a button that you can press on the torch, then this is how you should create your electrical arc. Pressing this button activates the high frequency start feature because it’s connected to a cable that is connected to the TIG welding power supply. This is the simplest, easiest way to create the arc. [14]
  4. If you don’t see a button on the torch, you’ll need to create an arc with the foot pedal. Press the pedal at least halfway down in order to create the arc.
    • If you’re having trouble starting the arc, your amperage is likely too low. Adjust your amperage setting and try again. [15]
  5. Melt the workpiece until you create an adequately-sized puddle that’s no wider than double the diameter of your filler. Add just enough of the filler rod to fill in the joint, and then move to the next portion of the weld. Continue until the entire joint is welded properly.
    • As you weld, heat will increase throughout the workpiece. Use your foot pedal to lower the amperage as you go to maintain control of the puddle. [16]
    • While you weld, pay close attention to your puddle size. If it’s too big or too small, you may burn through your material or not get a solid weld.
  6. 6
    Add a little extra filler rod at the beginning of the weld. Weld for about ¼ inch (6.35 mm), then stop and let things cool for a few seconds. After your weld has had a moment to cool, restart the weld. Having a little extra metal at the start of the weld will make your weld stronger and prevent cracking.
  7. Slowly push the puddle that the torch creates down the joint, adding filler as you go. Move at an even pace to keep the puddle a consistent size. [17]
  8. Once you’ve finished your weld, stop the arc by slowly taking your foot off of the pedal. Then take your finger off of the button that’s on the torch.
    • Give the metal plenty of time to cool before you touch the finished product.
    9. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    What type of welder is best for aluminum?
    Jones Welding & Industrial Supply Company
    Industrial Welding Experts
    Welding can be a complex and potentially hazardous activity. The information provided here is meant to serve as a general guideline, but it is crucial to prioritize safety and consult with a qualified welding specialist or instructor if you have any doubts or concerns. Welding techniques, materials, and equipment may vary, and the proper procedures and precautions may depend on specific circumstances. Welding involves inherent risks, such as exposure to high temperatures, intense light, fumes, and electrical hazards. Therefore, it is essential to receive proper training, follow manufacturer's guidelines, and adhere to safety regulations and practices. WikiHow and Jones Welding & Industrial Supply, Inc do not assume any responsibility or liability for any injuries, damages, or losses resulting from the use or misuse of the information provided. Always seek professional advice and take appropriate precautions to ensure your safety when engaging in welding activities. You can always consult with your local welding supply store to be led into the right direction!"
    Jones Welding & Industrial Supply Company
    Industrial Welding Experts
    Expert Answer
    TIG (Tungsten Insert Gas) welding is commonly recommended as the preferred method. TIG welding provides precise control over the welding process and produces high-quality welds on aluminum.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 1
  • Question
    Is it difficult to weld aluminum?
    wikiHow Staff Editor
    Staff Answer
    This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.
    wikiHow Staff Editor
    Staff Answer
    Generally aluminum is viewed as being harder to weld than steel, but the processes are different and aluminum also requires some different equipment as well. You probably shouldn't expect to do a flawless job on your first project.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 5
  • Question
    What equipment is needed to weld aluminum with a MIG welder?
    Community Answer
    You need a push-pull system or a wire feeding system for your MIG welder (like spool gun or "cobra head").
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 5 Helpful 18
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!

      Things You'll Need

      • TIG welder
      • Aluminum filler rod
      • Argon gas
      • Welding helmet
      • Thick gloves
      • Fire extinguisher
      • Long-sleeved shirt
      • Acetone
      • Water
      • Stainless steel brush
      • Gas torch
      • Heat sink
      • Clamps
      • File

      You Might Also Like

      How to
      Melt Aluminum
      How to
      TIG Weld
      How to
      Weld Plastic
      How to
      Anodize Aluminum
      How to
      Solder Aluminum
      How to
      Cut Aluminum
      How to
      Polish Scratches Out of Aluminum
      How to
      Melt Aluminum Cans
      How to
      Prime & Paint Aluminum Surfaces
      How to
      Age Aluminum
      How to
      Braze Aluminum
      How to
      Acid Wash Aluminum
      How to
      Polish Aluminum
      How to
      Keep Polished Aluminum Shiny
      Advertisement

      Expert Interview

      Thanks for reading our article! If you’d like to learn more about metalworking, check out our in-depth interview with Jones Welding & Industrial Supply Company .

      References

      1. ↑ https://www.millerwelds.com/resources/article-library/tig-it-how-a-tig-welder-works-and-when-to-tig-weld
      2. ↑ https://www.bakersgas.com/weldmyworld/2017/03/13/welder-best-tig-welding-aluminum/
      3. ↑ http://www.esabna.com/us/en/education/blog/should-i-use-4043-or-5356-filler-alloy.cfm
      4. ↑ http://artsautomotive.com/publications/8-automotive/86-welding-beginner-guide-to-aluminum/
      5. ↑ http://www.lincolnelectric.com/en-us/support/welding-how-to/Pages/guide-aluminum-welding-detail.aspx
      6. ↑ https://www.ccohs.ca/oshanswers/safety_haz/welding/ppe.html
      7. ↑ http://www.lincolnelectric.com/en-us/support/welding-how-to/pages/tig-welding-aluminum-detail.aspx
      8. ↑ http://artsautomotive.com/publications/8-automotive/86-welding-beginner-guide-to-aluminum/
      9. ↑ http://www.thefabricator.com/article/safety/creating-a-safe-welding-environment
      1. ↑ https://www.millerwelds.com/resources/article-library/tig-welding-aluminum-for-beginners-steps-1-2
      2. ↑ https://www.millerwelds.com/resources/article-library/tig-welding-aluminum-for-beginners-steps-1-2
      3. ↑ https://www.millerwelds.com/resources/article-library/tig-welding-aluminum-for-beginners-steps-1-2
      4. ↑ https://rts.i-car.com/images/pdf/upcr/we01s.pdf
      5. ↑ http://www.gowelding.org/welding/tig-gtaw/
      6. ↑ http://www.r-techwelding.co.uk/tig-welding-how-to-use-a-tig-welder-guide
      7. ↑ https://www.millerwelds.com/resources/article-library/tig-welding-aluminum-for-beginners-steps-1-2
      8. ↑ https://www.millerwelds.com/resources/article-library/tig-welding-aluminum-for-beginners-steps-1-2

      About This Article

      Article Summary X

      To weld aluminum, clamp the aluminum pieces together tightly and use a propane torch to preheat them to a temperature between 300°F and 400°F. Then, set the amperage of your welder, aim at the aluminum pieces, and press the button on the torch. Melt the aluminum until you create a small puddle, then slowly push the puddle down the joint, adding filler as you go. Be sure to move at an even pace to keep the puddle a consistent size! For tips on using proper welding movements, read on!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 647,161 times.

      Reader Success Stories

      • Brighton Kaniki

        Mar 22, 2018

        "Being a local welder, have never come across aluminium weld, so this article has helped me to know how to deal with ..." more
      More reader stories Hide reader stories
      Share your story
      If you buy through links on our site, we may earn a commission .

      Did this article help you?

      Advertisement