How to Apply WD‐40 to Door Hinges

PDF download Download Article
PDF download Download Article

Got a squeaky door? WD-40 is a solid short-term solution. With a few squirts from the nozzle, you’ll have your door hinges squeak-free in no time. We’ll show you everything you need to know about using WD-40 on your door hinge. Just keep in mind, WD-40 isn’t actually a lubricant, and it will dry out eventually. As a result, we’ll also cover a variety of long-term solutions here as well.

Method 1
Method 1 of 3:

Applying WD-40 to Home Door Hinges

PDF download Download Article
  1. Like any other aerosol spray, WD-40 distributes its contents as a kind of cone-shaped cloud. With the smart straw in place, however, you’ll be able to emit WD-40 in a thin precision stream. This is ideal for applying WD-40 to a door hinge.
    • The smart straw is a long red tube that, in its undeployed state, remains snug against the WD-40 canister.
    • If your WD-40 comes with a smart straw, snap it into place by pulling up on the gray base of the red tube. This base is located near the top of the WD-40 canister.
  2. With the WD-40 smart straw in place, position the canister so that the end of the tube is about one inch (two centimeters) from the door hinge to which you wish to apply WD-40. If you’re using a WD-40 canister that doesn’t have a smart straw, identify the location of the actuator orifice (the place from which the WD-40 issues) and aim it toward the door hinge. The actuator orifice should be one inch (two centimeters) from the door hinge you wish to apply WD-40 to.
    • It can also help to tap the hinge pin up just slightly and spray the WD-40 in the gap on top of the hinge. This allows the spray to penetrate the inside of the hinge and the pin.
    Advertisement
  3. Watermark wikiHow to Apply WD‐40 to Door Hinges
    Once you’ve positioned the smart straw or actuator orifice appropriately, you’re ready to apply the WD-40 to the door hinge. WD-40 canisters emit their contents quite quickly, so do not hold the actuator down for prolonged periods. Instead, press down on the actuator using your index finger, then release it quickly. WD-40 will leave the canister. Apply the WD-40 in quick bursts, moving from the top of the door hinge to the bottom.
  4. Watermark wikiHow to Apply WD‐40 to Door Hinges
    Clean the door hinge off. Applying WD-40 to your door hinges will cause them to attract dust and turn black. [1] After applying WD-40 to the door hinge, wipe it clean by dipping a microfiber cloth in some hot, soapy water. Wring it out, then wipe the door hinge with the cloth. To prevent rust, wipe the hinge down with a dry microfiber cloth.
    • You can also use a paper towel sprayed with all-purpose cleaner.
    • If you lifted up the hinge pin, remember to tap it back down when you finish spraying.
    5. Advertisement
Method 2
Method 2 of 3:

Applying WD-40 to Automobile Door Hinges

PDF download Download Article
  1. The actuator orifice is the hole from which WD-40 leaves the WD-40 canister. If you WD-40 canister is equipped with a smart straw (a long movable red tube), the actuator orifice will be a round yellow circle on the top of the canister’s actuator (the button you press down to utilize the WD-40). In other WD-40 canisters, however, the actuator orifice is a round black dot on the top of the canister’s actuator.
  2. Point the WD-40’s actuator orifice toward your automobile’s door hinge. The actuator orifice should be about one inch (two centimeters) from the door hinge. [2]
    • For a more precise spray, look at the area in the door jamb where the hinges are located. Close the door and take note of any area where metal contacts metal as the door moves. These are the areas you'll spray.
    • You should also spray the door latch mechanism.
  3. Watermark wikiHow to Apply WD‐40 to Door Hinges
    When you’re ready, place your index finger over the actuator. Squeeze the actuator in a series of quick bursts across the surface of the vehicle’s door hinge. You can move from left to right, or from right to left across the hinge.
    • If you have access to two door hinges, be sure to coat them both.
  4. Watermark wikiHow to Apply WD‐40 to Door Hinges
    In order to adequately coat the internal portion of the hinge with WD-40, you’ll need to open and then close the door a few times. This ensures that it will lubricate the entire hinge mechanism. It can help to lubricate the hinge as you move the door back and forth. [3]
    5. Advertisement
Method 3
Method 3 of 3:

Trying Alternatives to WD-40

PDF download Download Article
  1. 1
    Squirt 3-in-1 oil on the hinge. Using 3-in-1 oil is a great way to help displace moisture and rust in your door hinges. Aim the oil at all the moving parts of the hinge and spray carefully, then open and close the door several times to work the oil in.
    • You can buy 3-in-1 oil at a hardware or home supply store.
  2. Watermark wikiHow to Apply WD‐40 to Door Hinges
    You can use either liquid soap or bar soap. If using liquid soap, squirt a bit onto a sponge, then wipe the sponge across the surface of the door hinge. If using bar soap, apply the bar of soap directly to the hinge, especially the joints around which the hinge turns.
  3. Watermark wikiHow to Apply WD‐40 to Door Hinges
    Dab a clean paper towel in a tub of petroleum jelly. Remove the hinge pin from the door by placing the pointed end of a nail at the bottom of the door hinge, then tapping the nail gently upward with a hammer. The hinge pin will come out the top of the hinge. Wipe the hinge pin with the paper towel, then slide it back into the hinge.
  4. Watermark wikiHow to Apply WD‐40 to Door Hinges
    Light some paraffin candles. After an hour or so, remove the hinge pin on the squeaky hinge by placing the pointed end of a nail beneath the squeaky hinge, then tapping the nail gently upward with a hammer. Slide the hinge pin from the top of the hinge. Blow out the candle, then dip the hinge pin in the melted wax. After it’s well-covered in wax, slip it back into the hinge. [4]
    • You can wear rubber gloves during this process if you don’t want to get wax on your hands.
    5. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    Will this permanently get rid of the squeaking?
    Ryaan Tuttle
    Home Improvement Specialist
    Ryaan Tuttle is a Home Improvement Specialist and the CEO of Best Handyman, Inc. in Boston, Massachusetts. With over 17 years of experience, he specializes in building home service businesses, focusing on creating scalable and efficient brands. With the help of his global team, the companies have achieved over 10+ million in sales and received recognition through magazine features, and enjoy partnerships with wikiHow and Jobber field service software. Boston Magazine and LocalBest.com have named Best Handyman Boston the Best Handyman in Boston. Ryaan holds Construction Supervisor and Home Improvement Contractor Licenses.
    Ryaan Tuttle
    Home Improvement Specialist
    Expert Answer
    No, eventually the WD-40 will dry out and you'll need to reapply it. For a long-term solution, you should replace the hinges with ball-bearing hinges that won't rub and squeak.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 1 Helpful 1
  • Question
    How do I attach the straw to the can?
    Community Answer
    You need to press and twist the straw. It is a bit challenging, but if you press it long enough, it will fit.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 1
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      You Might Also Like

      5 Ways to Fix a Broken Door Frame
      How to
      Adjust Door Hinges
      How to
      Fix and Repair a Damaged Hollow Core Door
      How to
      Fix a Rubbing Door
      How to
      Remove a Door Hinge Pin
      How to
      Seal a Door
      How to
      Lubricate Door Hinges
      How to
      Fix a Stripped Screw Hole in a Door Hinge
      How to
      Stop Squeaky Door Hinges
      How to
      Plane a Door
      Simple Ways to Adjust Self-Closing Spring Hinges
      Adjusting French Doors: Your Top Problems Solved
      How to
      Level a Door
      How to
      Repair a Door Chime
      Advertisement

      References

      1. ↑ http://lifehacker.com/5891936/when-should-i-not-use-wd-40
      2. ↑ http://www.vehicleservicepros.com/in-the-bay/tools-equipment/article/20843944/tech-tip-tackling-automotive-projects-with-wd40-specialist-spray-stay-gel-lubricant
      3. ↑ http://www.vehicleservicepros.com/in-the-bay/tools-equipment/article/20843944/tech-tip-tackling-automotive-projects-with-wd40-specialist-spray-stay-gel-lubricant
      4. ↑ https://www.bobvila.com/articles/how-to-fix-a-squeaky-door/
      5. ↑ http://www.popularmechanics.com/cars/how-to/a6064/wd-40-vs-the-world-of-lubricants/

      About This Article

      In other languages
      Thanks to all authors for creating a page that has been read 75,198 times.

      Did this article help you?

      Advertisement