PDF download Download Article PDF download Download Article

The Subaru Outback air filtration system is designed to improve the quality of air in the cabin of the car. Replacing the filter will also allow the air from the vents and the A/C to move more freely throughout the vehicle. It's recommended that you change your air filter once a year, or every 7,500 miles (12,100 km). The following steps outline how to change the filter, and only a few simple tools are needed for the project.

Get Car Support Solve Any Problem

wH
Hi there! Do you have a question about how to diagnose or fix a problem with your car? I’ve read the manual so you don’t have to. Select your make, model, and year, then ask away!
*
*
  1. Remove all contents in the glove box. Locate the dashboard panel at the right side of the glove box and pull it out. Use a flat-head screwdriver to pry the panel from the dash.
  2. Disconnect the stopper string of the glove box, which is found on the right side. Push in the sides of the glove box to release the knock pins. Unscrew the screws that hold in the knock pins 1/4 of an inch with a Phillips screwdriver. Remove the pins. [1]
    Advertisement
  3. Carefully put pressure on both sides of the glove box, 1 side at a time, to loosen the stops from the tracks. Let the glove box drop out of the way. [2]
  4. In the Subaru Outback and Legacy models, there is a raised shelf in the glove box that holds the owner's manual. Locate the owner's manual shelf on the right side of the console. Use a Phillips screwdriver to unscrew the 3 screws attaching it to the console. Remove the shelf.
  5. Unscrew the 3 screws on the filter housing bracket using a Phillips screwdriver. Remove the bracket. Remove the insulation on the bracket cover.
  6. Apply pressure to the 4 clips on the front of the filter housing tray. Pull out the tray. Remove the old filter from the tray. [3]
  7. Place the new filter in the tray. Ensure that the arrow for filter direction that is indicated on the new filter is facing the right direction. [4]
  8. Make sure the tray clips are in place.
  9. Reconnect the assembly of stops and track grooves. Reinstall the console side panel and the glove box installation screws. Lift the glove box up and replace the knock pins. Restore the dashboard panel. [5]
  10. Advertisement

Community Q&A

Search
Add New Question
  • Question
    How often should you change a cabin filter? I had one put in six months ago and was recently told I need a new filter. Does this sound right? We don't do a lot of driving.
    Dean V
    Community Answer
    Most manufacturers recommend cabin air filters be replaced every 15,000 - 30,000 miles, depending on driving conditions. If someone drives a lot in dusty conditions, they should replace more often.
Ask a Question
      Advertisement

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Thanks for submitting a tip for review!

      Things You'll Need

      • Replacement air filter
      • Phillips screwdriver
      • Flat-head screwdriver


      About This Article

      Thanks to all authors for creating a page that has been read 103,212 times.

      Reader Success Stories

      • Jim Hancock

        Sep 14, 2016

        "Excellent step-by-step instructions to change Subaru cabin air filter. Pictures would help a bit. I know they take ..." more
      Share your story

      Did this article help you?

      Advertisement