Download Article
Download Article
Shellac is a popular finish that has been used to coat wood for hundreds of years. Many older homes have shellac finished banisters or floors, and you don't have to look far to find antiques coated in shellac. After many years of use, shellac coating can develop water stains and damage. Luckily, it is the easiest wood finish to clean and repair. Whether you are dealing with shellac that needs a quick clean with soapy water or a shellac coated item that requires complete repair, you shouldn’t need more than a day or two to get your shellac surface looking shiny and new.
Steps
-
Dilute a small amount of mild liquid soap into a bucket of warm water. Use roughly 1 capful of soap for every 2 cups (470 mL) of warm water. Make enough of the solution to clean the entire shellac surface you'll be working on. [1] X Research source
- A small desk may only need 2–4 cups (470–950 mL), while shellac floors could use a whole bucket of water.
- Avoid oil-based soaps that contain alcohol. Alcohol breaks down shellac and could damage the surface you are cleaning.
-
Immerse a rag into the warm soapy water and wring it out completely. You want your rag to be damp but not dripping with water. Water can damage shellac, especially shellac that has aged, so use just enough soapy water to clean the shellac without causing water damage. [2] X Research source
- If you are cleaning shellac coated floors, you can use a classic cotton string mop for this step. Just remember to wring out the excess soapy water before you start mopping.
Advertisement -
Wipe down the surface of the shellac with the damp rag. Moving from the top to the bottom of the surface area you are cleaning, wipe down the shellac with your soapy rag. Thoroughly scrub one section at a time, and quickly wipe off excess water.
- Wax or grime that was not removed by the soap is an indication that the surface needs additional cleaning. Stains or cracks suggest that you need to repair the shellac surface.
Advertisement
-
Apply turpentine to a clean rag and wring it out completely. Older shellac surfaces may have developed grime and wax buildup. To break down these stubborn areas, use a solvent like turpentine. Thoroughly soak a rag in the turpentine (don’t forget to use gloves!) and wring it out. [3] X Research source
- If the shellac surface has a ton of buildup, use steel wool (grades 0-0000) instead of a rag. Soak the steel wool in turpentine and wring it out completely.
- Grade 0000 steel wool (the finest option) is the best place to start if you aren’t sure which grade to use. If you know that your shellac surface has excessive buildup, grade 0 steel wool will easily break down stubborn sections. [4] X Research source
- Avoid using any grade of steel wool that is coarser than 0 grade because it could damage the shellac.
-
Scrub the entire shellac surface using a circular motion. Working methodically to cover every section of the shellac, scrub the entire surface with your turpentine-soaked rag (or steel wool). Using a circular motion will help the turpentine break down excess buildup. Use a gentle hand, and take your time working through problem areas.
- You will likely need to reapply the turpentine to your rag (or steel wool) a few times. If you notice the wax buildup is smearing rather than being removed, that means it is time to apply more turpentine to your rag (don’t forget to wring it out).
-
Scrub the shellac surface again, this time following the wood grain. Soak your rag in turpentine one more time and give a final scrub of the shellac surface, using a bit more force as you follow the grain. Use this final pass with the turpentine to remove any spots that still have excess grime or wax buildup.
-
Wipe down the surface with a clean, dry rag. Use as many dry rags as needed to thoroughly wipe down the shellac surface until the finish looks clean and is completely free of grime.
- If your shellac surface looks shiny and new, you can stop here. If the shellac surface has visible water damage, cracks, or peeling, you will need to repair the shellac surface.
Advertisement
-
Sand the cleaned shellac with fine sandpaper. Using fine sandpaper, around 320-grit, lightly sand the entire shellac surface. Move the sandpaper in a circular motion while pressing down lightly. The idea is to open up the shellac surface to prepare it for a new coat of finish.
- You don’t need to sand off the shellac that is present, just rough it up enough so that the new finish can stick to it.
-
Remove dust with a vacuum or rag. Thoroughly vacuum up the sanding dust. If you don’t have a vacuum on hand, you can use a dry rag to wipe it away. Removing excess dust allows the fresh shellac coating to be applied evenly.
-
Mix 4 parts denatured alcohol with 1 part dewaxed shellac flakes. In a glass jar (avoid metal and plastic), add the desired amount of dewaxed shellac flakes, then pour in the denatured alcohol. Let the mixture dissolve completely. Cap the jar and shake it often, so the shellac doesn’t clump on the bottom. Wait for the flakes to completely dissolve in the alcohol.
- It can take a few hours for a small batch of shellac flakes to dissolve in alcohol, and up to a day for larger batches. To be safe, mix the shellac and alcohol the day before you plan on using the mixture. [5] X Research source
- Combining denatured alcohol with shellac flakes creates the perfect mixture to revive your old shellac surface. The alcohol breaks down the old shellac finish, allowing it to merge with the fresh shellac. The result is a beautifully rejuvenated shellac finish.
-
Use a paintbrush to apply the alcohol mixture over the shellac surface. Shellac dries really quickly. When you are coating the old shellac surface with this fresh mixture, try to keep the brush moving and work fast. [6] X Research source Follow the grain and move methodically over the surface, so the shellac is applied evenly. Dip your paintbrush back into the mixture often so that it doesn’t dry out.
- Do your best to catch drips before they dry but don’t fret if you miss some. If this happens, just wait for the entire surface to dry and then rub out the drips with some fine sandpaper.
- Use a 1 or 1.5 pound cut brush. The thinner brush reduces brush marks and avoids excessive buildup. [7] X Research source
-
Wait 2 hours for the finish to dry. Once the finish has dried, you’ll be able to see if you need another coat. If the first coat of fresh shellac makes the surface look shiny and new, you can move on. If there are still damaged areas, apply another coat of the alcohol and shellac mixture and wait a few hours for it to dry. [8] X Research source
- Especially damaged surfaces could use up to 3 coats of the shellac and alcohol mixture.
-
Scoop furniture wax onto a clean rag and apply using a circular motion. Adding furniture wax to your new shellac surface protects it from further damage while making it look shiny. Apply the scoop of wax in a circular motion until it is thinly coating the entire surface. [9] X Research source
- You could use beeswax instead of furniture wax if you have it on hand.
-
Buff the surface with a fresh cloth after the wax sits for 5 minutes. Using the same circular motion, take a clean cloth and buff the entire shellac surface. Press down fairly hard during this process to give the surface a nice shine.
-
Polish the surface by working a clean rag along the grain of the wood. Use a fairly aggressive motion to polish the wax. The final result will be a polished shellac surface that has a lovely shine.
Advertisement
Expert Q&A
Search
-
QuestionWhat can I use to clean shellac?Arturo Perez is a Residential & Commercial Cleaning Expert and the Owner of Janitorial Plus LLC in Gresham, Oregon. With over nine years of experience, Arturo and his team specialize in commercial and residential cleaning. Their services include but are not limited to spring cleaning, commercial window washing, and move-in and out cleaning. Janitorial Plus LLC won Oregon's Top Rated Local Janitorial Company Award in 2018.Eco-friendly products are always a secure option—you can clean almost everything with them. Other than that, check the labels to confirm if a product is safe to use on shellac.
-
QuestionHow would I clean a shellacked floor?ZackTop AnswererYou can clean a shellacked floor with the same methods found in this article.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Tips
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Warnings
- Use protective clothing, gloves, and eye protection when working with solvents.Thanks
Advertisement
Things You'll Need
- Denatured alcohol
- Clean rags
- Mild liquid soap
- Warm water
- Solvent (turpentine or paint thinner)
- Fine sandpaper (320-grit)
- 0-0000 grit steel wool
- Shellac finish
- Furniture Wax
- Paintbrush
Expert Interview
Thanks for reading our article! If you’d like to learn more about cleaning shellac, check out our in-depth interview with Arturo Perez .
References
- ↑ http://antiquerestorers.com/Articles/jeff/saving_the_finish.htm
- ↑ http://antiquerestorers.com/Articles/jeff/saving_the_finish.htm
- ↑ https://digitalcommons.usu.edu/cgi/viewcontent.cgi?article=1505&context=extension_histall
- ↑ https://digitalcommons.usu.edu/cgi/viewcontent.cgi?article=1505&context=extension_histall
- ↑ https://www.woodcraft.com/blog_entries/success-with-shellac
- ↑ https://www.woodcraft.com/blog_entries/success-with-shellac
- ↑ https://www.woodcraft.com/blog_entries/success-with-shellac
- ↑ https://www.woodcraft.com/blog_entries/success-with-shellac
- ↑ http://antiquerestorers.com/Articles/jeff/saving_the_finish.htm
About This Article
Thanks to all authors for creating a page that has been read 35,487 times.
Reader Success Stories
- "Clear, concise instructions. I found success in finishing kitchen shelves using a simplified French polish technique. I wadded a large golf ball size of cheesecloth, which I submerged in a very small quantity of shellac. I covered it with a white rag." ..." more
Advertisement
82%
of readers found this article helpful
.
Click a star to add your vote
% of people told us that this article helped them.
"Clear, concise instructions. I found success in finishing kitchen shelves using a simplified French polish technique. I wadded a large golf ball size of cheesecloth, which I submerged in a very small quantity of shellac. I covered it with a white rag."
..."
more
