Download Article
Download Article
Sweet gums are trees that have beautiful colored leaves, drop spiky gum balls, and spread rapidly. Since they tend to take over land quickly, it's natural to want to control their spread. There are two main ways you can help control your sweet gums: chopping down the sapling or making indentations into its bark, and both of these methods require an herbicide spray. With a little bit of time, you'll be on your way to controlling your saplings.
Please note: The WHO considers glyphosate to be a probable human carcinogen. Its use is prohibited in some states and countries. Please check with your local laws and use caution if handling this chemical.
Steps
-
Purchase an herbicide that works well on sweet gum trees. Visit your local garden or home improvement store to look for an herbicide that contains glyphosate, if possible. Arsenal is the most popular herbicide for sweet gums and can be applied in its pure form or mixed with water to dilute it slightly. [1] X Trustworthy Source EDIS Electronic database of the University of Florida Institute of Food and Agricultural Sciences's peer-reviewed articles Go to source
- Ask an employee for help picking out the right herbicide if needed.
- Check the herbicide's label to see how much water you'll use to dilute it.
-
Cut down saplings with a saw if their diameter is 6 in (15 cm) or smaller. If your sweet gum sapling is relatively skinny, it’s easiest to use a hand saw to remove it. Make the cut at the bottom of the tree so a short stump will be all that’s left. Use slow, horizontal movements of the hand saw to cut the tree near the ground nicely. [2] X Research source
- Wear eye protection, gloves, and closed-toe shoes when you’re working with the hand saw.
- Try to leave less than 6 in (15 cm) of stump once you cut it.
Advertisement -
Use a chainsaw to remove the sweet gum if the diameter is more than 6 in (15 cm). If your sweet gum trunk is fairly wide, it’s best to use a chainsaw to chop it down for a quick and easy tree removal. Use the chainsaw to slice the sapling horizontally near the bottom of the tree so you’re left with an even stump. [3] X Research source
- Wear eye protection, gloves, and closed-toe shoes when you’re working with a chainsaw.
- If you don’t own a chainsaw, most big box home improvement stores will let you rent one.
- Aim to leave 6 in (15 cm) or less of a tree stump.
-
Apply the herbicide to the stump as soon as the sapling is cut. Fill a spray bottle with the herbicide or apply the herbicide using a foam brush for a stronger coating. Spray a generous amount of the herbicide onto the stump right after you cut it or dip the foam brush into the herbicide and brush it onto the entire stump. If you wait longer than 30 minutes to apply it, the stump will form a protective coating that the herbicide won’t be able to get through. [4] X Research source
- Follow the instructions that come with the herbicide to ensure you mix it properly (many herbicides require water).
- Wear gloves and eye protection when working with the herbicide.
- Drill 3-4 holes into the stump if you'd like the herbicide to reach deeper. Spread the holes out and use a power drill to drill about 2 in (5.1 cm) into the stump.
- The stump will die over time, but you can remove it manually if you'd like it gone faster.
-
Prune away any new growth that appears and spray it, too. Watch the sweet gum stump to make sure new growth doesn’t form. If it does, use a pair of pruners to clip off the growth and spray it with the same herbicide you used on the stump. [5] X Research source
- Keep watching the stump for new growth for at least 3-6 months.
Advertisement
-
Purchase an herbicide for your sweet gum saplings. Look for an herbicide called Arsenal, which is the best herbicide for controlling sweet gums. If that's not available, any herbicide that contains glyphosate and is used on trees will work, too. [6] X Trustworthy Source EDIS Electronic database of the University of Florida Institute of Food and Agricultural Sciences's peer-reviewed articles Go to source
- Visit your local garden or home improvement store to find an herbicide.
-
Fill a spray container with a sweet gum herbicide and water. If you're using Arsenal, fill a spray bottle 20% of the way with Arsenal herbicide and the other 80% of the way with water. Shake the bottle gently to mix the herbicide and water together. If you're using another kind of herbicide, follow the instructions that came with it to dilute it. [7] X Research source
- It doesn't take much herbicide and water to kill the sapling. Fill a small spray bottle that you might use for crafts.
-
Make an indentation in the side of the sapling with a hatchet. Hack at the tree with the hatchet so that you form an indentation that tilts downwards into the tree. This will make it easier for the herbicide to reach the roots. [8] X Trustworthy Source EDIS Electronic database of the University of Florida Institute of Food and Agricultural Sciences's peer-reviewed articles Go to source
- There’s no need to cut a huge chunk out of the tree—as long as the hatchet indentation reaches past the bark and into the tree, the cut should work.
- Wear protective glasses and closed-toe shoes when you’re working with the hatchet.
-
Spray the indentation with the herbicide thoroughly to kill the sapling. Once you’ve made your cut into the tree, spray the inside of the indentation with the herbicide. It doesn’t take a lot—just a couple squirts should work. [9] X Research source
- Wear proper protection when you're spraying the herbicide so it doesn't get into your eyes or skin.
- If the sapling is larger than 6 in (15 cm) in diameter, you might consider making another hack into the other side of the tree and spraying it, too.
-
Examine the sapling every month or so to check its progress. It may take several months for the sweet gum sapling to die, but it's still a good idea to check it periodically. If you notice it continuing to grow, this is a sign you need to hack and spray the sapling again to be sure the herbicide reaches its roots.
- Wait at least 3 months to see if the tree's growth stops.
- The sapling may take up to a year to completely die, so if you want it removed quickly, it's best to remove the sapling and roots manually after you've sprayed it.
Advertisement
Expert Q&A
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Things You'll Need
Cutting Down Saplings
- Sweet gum herbicide
- Hand saw (optional)
- Eye protection
- Gloves
- Closed-toe shoes
- Chainsaw (optional)
- Spray bottle (optional)
- Foam brush (optional)
- Drill (optional)
- Pruners
- Sweet gum herbicide
- Spray bottle
- Hatchet
- Eye protection
- Gloves
- Closed-toe shoes
Tips
- Avoid cutting sweet gum saplings in the spring if possible because they have a higher sap content then, making it much more difficult to cut through the bark.Thanks
- If you're not sure about cutting down your own saplings, call a local tree removal company.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Warnings
- There are certain plants and other types of trees that the herbicide may damage or kill, depending on the brand you purchase. Check the labels of your herbicide to make sure it's safe for the other plants near your sweet gum saplings.Thanks
- Avoid letting the herbicide get into your eyes or on your skin so it doesn't cause irritation by wearing eye protection, gloves, long sleeves, and closed-toe shoes.Thanks
Advertisement
References
- ↑ https://edis.ifas.ufl.edu/ag245
- ↑ https://www.dec.ny.gov/docs/lands_forests_pdf/prunetree.pdf
- ↑ https://www.youtube.com/watch?v=httHAm4Hzwk#t=8s
- ↑ https://www.youtube.com/watch?v=httHAm4Hzwk#t=30s
- ↑ https://www.youtube.com/watch?v=xgdIXBjK-rU#t=4m15s
- ↑ https://edis.ifas.ufl.edu/ag245
- ↑ https://www.youtube.com/watch?v=TglNG-yjabU#t=20s
- ↑ https://edis.ifas.ufl.edu/ag245
- ↑ https://www.youtube.com/watch?v=TglNG-yjabU#t=59s
About This Article
Thanks to all authors for creating a page that has been read 21,236 times.
Advertisement