How to Dye a Satin Dress

PDF download Download Article
PDF download Download Article

If you have a satin dress that you’ve already worn to a special event, you might be thinking of dyeing it so you can wear it again. Since satin refers to the way that the fabric is woven, rather than the actual material the dress is made from, you’ll have to determine the makeup of your fabric before you can dye your dress. Luckily, most forms of satin can be dyed once you know what kind of material you’re working with!

Method 1
Method 1 of 4:

Preparing to Dye Your Dress

PDF download Download Article
  1. 1
    Check for a label indicating the material used for your dress. The easiest way to identify what fabric your dress is made from is to check for a care tag or label on the inside of the garment. Satin is usually made from silk, rayon, cotton, polyester, or acetate, but it sometimes may be made from a blend of these fibers.
    • If your dress is made from 2 different fibers, choose your dyeing method based on the highest percentage. For instance, if your dress is a blend of 70% cotton and 30% polyester, you would dye it as if it were entirely cotton. However, your results would likely be lighter than if your garment were 100% cotton.
  2. 2
    Perform a burn test if there’s no label present. Cut a small piece of fabric from an inner corner or seam on your dress. Place the fabric in a pie plate or similar fireproof container, then place the plate on a fireproof surface, like a concrete sidewalk. Hold the fabric steady with a long pair of tweezers, then hold a flame to the fabric using a long match or fireplace lighter. [1]
    • If your dress is made from natural fibers, the fabric will singe and burn. [2]
    • Polyester or acetate will melt rather than burn. It will have a strong toxic chemical smell, and it will leave behind small beads of black plastic. [3]
    Advertisement
  3. 3
    Weigh the dress to determine how much dye you will need. You will need 1 box of powder dye or 1/2 bottle of liquid dye for every 1 lb (0.45 kg) of fabric.
    • You may choose to double this amount if you are trying to achieve a darker color.
  4. 4
    Select your desired color. Keep in mind that the original color of your garment will affect its final shade. For instance, if you try to dye a yellow garment with red dye, the result will probably be orange.
    • If you want to lighten your dress, you will need to use a commercial color remover before you dye it.
  5. 5
    Cover your workspace with a dropcloth or tarp. Dye can be messy, especially if you’re working with powdered dye. Protect the table or countertops where you’ll be working with a non-absorbent covering like a tarp so you don’t permanently stain them.
    • You may also want to keep old rags or paper towels nearby in case of spills.
  6. 6
    Wear heavy rubber gloves while you dye your dress. Fabric dye can stain your skin, and it may even cause irritation if you have sensitive skin. You’ll also be working with hot water, so it’s important to protect your skin.
  7. 7
    Wash your dress in warm water before you dye it. To ensure your dress doesn’t have any dirt or other residue that will prevent it from dyeing evenly, wash it with a mild detergent in warm water, either by hand or in the washing machine. [4]
    • The dress should be wet when you add it to the dye.
  8. 8
    Treat your dress with a color remover if you want to lighten it. Mix the prepared color remover with water, then soak the dress for the amount of time recommended on the packaging.
    • You can purchase commercially prepared color remover at the same place you buy your fabric dye.
    • Do not attempt to lighten your garment with bleach, as you can permanently damage it.
  9. 9
    Smooth out any wrinkles before adding the dress to the dye. If your garment is wrinkled when you add it to your dye, it may not change colors evenly. Spread your dress out flat after you wash it. When you’re ready to add it to the dye, lower it in carefully, but don’t ball it up.
    10. Advertisement
Method 2
Method 2 of 4:

Dyeing a Silk, Cotton, or Rayon Dress

PDF download Download Article
  1. 1
    Choose regular fabric dye if your dress is cotton, rayon, or silk. Commercial dyes will take well to these natural fibers, especially if your dress is a light color. You can purchase these dyes at most major retailers. [5]
  2. 2
    Fill a bucket with water that has been heated to 180 °F (82 °C) degrees. Your bucket will need to be large enough to hold several gallons of water as well as your dress. You can use a candy thermometer to monitor the temperature if you heat it on the stove, or you can use hot water from your tap.
    • Use 3 gallons (11 l) of water for every 1 pound (0.45 kg) of water.
    • If you prefer, you can use your washing machine. Adjust the settings to the smallest load and the hottest water.
  3. 3
    Stir the dye into the water with a long-handled spoon. The weight of your dress should determine how much dye you need. If you are using liquid dye, shake the container very well before adding the bottle to your tub of hot water.
    • If you’re using powdered dye, try dissolving it in a cup or bottle of very hot water, then pour the mixture into the larger bucket.
    • To test the color of your dye, dip a piece of paper towel into the dye mixture. Keep in mind that this test will probably be a little darker than the finished product. If the color seems too dark, add more water. If it seems too light, add more dye.
  4. 4
    Add 1 cup (240 mL) of salt or vinegar to the hot water. Both salt and vinegar will help the dye to set in the fabric. If you use salt, mix it into a small amount of very hot water until it’s dissolved, then add it to the dye mixture.
    • Salt may slightly dull the shine of your satin fabric, so if you want your dress to remain shiny, opt for vinegar.
  5. 5
    Lower the dress into the dye and let it soak for 30 minutes, stirring often. Use a long-handled spoon to agitate the water frequently to ensure the color mixes evenly through the fabric.
    • If you’re using a washing machine, you can either set it to agitate or you can stir the fabric manually with a spoon.
  6. 6
    Remove the dress and check the color after 30 minutes. Lift the dress out of the dye, taking care not to drip the color anywhere except your tarp. If it seems too light, return it to the dye and check it in 5-minute increments until it turns the desired color.
    7. Advertisement
Method 3
Method 3 of 4:

Using Disperse Dye for a Polyester or Acetate Dress

PDF download Download Article
  1. 1
    Choose a disperse dye if your dress is polyester or acetate. Synthetic materials like polyester and acetate are extremely difficult to dye. You’ll have to use a special dye called a disperse dye, which must be applied at extremely high temperatures.
    • This method is more difficult and dangerous than dyeing natural fibers, so you may want to consider buying a new dress or fabric instead of trying to dye synthetic satin.
  2. 2
    Dissolve the desired amount of dye in a small amount of water. Pour the disperse dye into a cup or bottle filled with water, then shake or stir until the dye is fully dissolved. [6]
    • The amount of dye you will need will depend on the weight of your dress and the shade you hope to achieve.
    • Use 1 bottle of disperse dye to achieve a light shade on a white or light dress.
    • Use 2 bottles of disperse dye to get a medium shade on a light-colored dress.
    • Use 4 bottles of disperse dye if your dress is already a light-to-medium shade or to get a very dark color.
  3. 3
    Add the dissolved dye and dress to a larger pot of water. You will need 3 gallons (11 L) of water for every 1 pound (0.45 kg) of fabric. Since you’ll be heating the water up, it can start out at room temperature. [7]
  4. 4
    Heat the mixture to about 160 °F (71 °C) and add the developer. Since synthetic materials are so difficult to dye, they need a special chemical to help them accept the dye. Your disperse dye should come with the developer included in the package. [8]
    • The packaging should tell you how much of the developer to add, depending on the weight of your dress.
    • This developer has a strong smell, so make sure you do this in a well-ventilated area.
  5. 5
    Continue to heat the dye and developer mixture until it boils, stirring often. You should use a long-handled spoon to stir the mixture frequently to ensure that the dye soaks evenly into the fabric of your dress. [9]
  6. 6
    Allow the mixture to boil for 20-30 minutes, then remove the dress. If you need to, adjust the temperature on your stove to make sure the mixture continues to boil. Check the dress after 20-30 minutes. If the color appears too light, return it to the mixture and check it in 5 minute increments. [10]
    7. Advertisement
Method 4
Method 4 of 4:

Rinsing and Washing the Garment

PDF download Download Article
  1. 1
    Rinse your dress in warm water, then switch to cool. Starting with warm water will help remove excess dye from your garment initially. However, switching to cool water will help the dye to finish setting. [11]
    • When the water runs clear, you have rinsed out most of the excess dye.
    • If you are dyeing your garment in the washing machine, turn it to a warm-cool cycle.
  2. 2
    Hang your dress up to dry. Once you have rinsed the dye, it’s time to dry your dress! Satin is a delicate fabric, so it’s best to let it air dry.
    • If you can’t wait for your dress to air dry before you try it on, tumble dry it on low heat.
  3. 3
    Run old towels through your washing machine if you used it. If you washed your dress in the washing machine, most of the dye should have rinsed out in the first cycle. To make sure there’s no dye remaining to stain your garments, however, you should run a load of old rags or towels through the wash before you do a regular load of laundry.
    4. Advertisement

Expert Q&A

Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Things You'll Need

      • Drop cloth or tarp
      • Paper towels or old rags
      • Heavy rubber gloves
      • Long-handled spoon
      • Dye
      • Color remover if lightening dress

      For a Burn Test

      • Fireproof pan
      • Tweezers
      • Long matches or fireplace lighter

      Natural Fibers

      • Large bucket or washing machine
      • Salt or vinegar

      Synthetic Fibers

      • Large pot

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!

      Warnings

      • Always perform a burn test in a well-ventilated area or outdoors, and make sure to keep the flame away from your hair or skin.
        Thanks
        Helpful 1 Not Helpful 0
      • If you use disperse dye, make sure you are in a well-ventilated area, and use caution while you are boiling the water.
        Thanks
        Helpful 0 Not Helpful 0
      • Do not attempt to dye fabrics which are labelled as "dry clean only," as you may destroy the garment.
        Thanks
        Helpful 0 Not Helpful 0
      Advertisement

      You Might Also Like

      How to
      Set Dyed Fabric
      How to
      Dye Fabric Black
      How to
      Bleach Jeans
      Dyeing Clothes White with Bleach or Color Remover
      Rit Dye Instructions for Dyeing Your Clothes
      How to
      Dye Clothes with Food Coloring
      Dyeing Fabric with Tea: An Inexpensive & Eco-Friendly DIY Project
      Step-by-Step Instructions for Dyeing Jeans Black
      How to
      Dye Polyester
      How to
      Fade Clothes with Bleach
      How to
      Dye Faux Fur
      How to
      Dye Nylon
      How to
      Make a Bleach T Shirt
      How to
      Dye Denim: A Step-by-Step Tutorial
      Advertisement

      References

      1. ↑ https://www.craftsy.com/sewing/article/burn-test-for-fiber-content/
      2. ↑ https://www.craftsy.com/sewing/article/burn-test-for-fiber-content/
      3. ↑ https://www.craftsy.com/sewing/article/burn-test-for-fiber-content/
      4. ↑ https://www.ssww.com/blog/tricks-and-tips-for-tie-dying/
      5. ↑ https://www.craftsy.com/sewing/article/dyeing-clothes/
      6. ↑ https://www.aljodye.com/usage_polyester_frames.html
      7. ↑ https://www.aljodye.com/usage_polyester_frames.html
      8. ↑ https://www.aljodye.com/usage_polyester_frames.html
      9. ↑ https://www.aljodye.com/usage_polyester_frames.html
      1. ↑ https://www.aljodye.com/usage_polyester_frames.html
      2. ↑ https://www.good.is/articles/do-it-yourself-dye-fabric-the-right-way-30daysofgood

      About This Article

      Article Summary X

      If you want to dye a satin dress, first you have to determine what kind of material it's made from. Check the dress for a care tag or label, or perform a burn test on the material if you're still not sure. If your dress is made from cotton, rayon, or silk, you can use a regular fabric dye. If it's polyester or acetate, you will need to use special disperse dye. To learn how to use these different types of dye, keep reading!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 48,491 times.

      Did this article help you?

      Advertisement