How to Install a Car Alarm

PDF download Download Article
PDF download Download Article

Car alarms are an effective way to insure your investment and give you peace of mind. While many cars come standard with some kind of alarm system, some do not. It is no surprise that many people want to install an aftermarket alarm system either because they don’t have one or because they feel that they need to upgrade. Installing a car alarm might seem like a difficult task, but with a little bit of preparation and information, it becomes nothing more than a series of small tasks.

Get Car Support Solve Any Problem

wH
Hi there! Do you have a question about how to diagnose or fix a problem with your car? I’ve read the manual so you don’t have to. Select your make, model, and year, then ask away!
*
*
Part 1
Part 1 of 3:

Planning the Installation

PDF download Download Article
  1. Planning ahead can shave hours off your installation time. In particular, gather documents and manuals outlining your car's wiring colors, locations, and polarities. [1]
  2. You want to make sure that they trigger the "door ajar" indicator on the dashboard. If a door fails to trigger, then the alarm will not go off when that door is tampered with. If a door doesn't trigger the alarm, then your alarm will not be effective.
    • Most alarms come with optional pin switches that trigger the alarm when the door opens. These can be a good alternative if your doors are not triggering the door ajar/dome light when opened. [2]
    Advertisement
  3. Make note of which panels will need to be removed and which tools you will need to remove them. Learn the wiring layout of your vehicle and sketch a plan for where you will connect your car alarm.
    4. Advertisement
Part 2
Part 2 of 3:

Installing the Car Alarm Unit

PDF download Download Article
  1. This will allow you to access the wires needed to hook up your car alarm. It will also give you access to places under the dash that you can mount the alarm if you choose. Typically this will include panels near the center of the dash on the driver’s side. They are often located near the floor or underneath the steering wheel.These panels will be different for each car, but you can refer to your car’s service manual to find the correct panels.
  2. Try to install the car alarm in a hidden place. Some people will mount it inside the dash if there is room, or under a seat. Just keep in mind that if the alarm is visible, a thief could tamper with it. The harder it is to find your alarm, the more effective it will be. [3] Install the mount with screws and accessories provided with the car alarm.
    • Be sure to look on the other side of any surface before running a screw through. You do not want to accidentally screw into wires or other parts.
  3. You can avoid this step if you run a wire from the car alarm to the siren through an already existing hole in the firewall. It often works well to run the wire alongside the heater core hoses, an amp power wire, ignition power source, or any other lead going to the other side of the firewall. If there are none conveniently located, you will have to make one. If you have to make a new hole, be sure to look on both sides of the firewall to ensure that the spot you’d like to drill is safe. As long as the drill will not hit any other parts, it should be fine to drill there.
  4. This wire will connect the car alarm to the siren.
    • It is important that you insulate this wire with a rubber boot or fill the hole with silicon. This keeps the wire from being damaged by friction with the firewall and shorting out. You should also aim to put the wire somewhere that it will not be kicked or tugged by yourself or your passengers for the same reasons. [4]
  5. You can choose a place on the firewall or somewhere else in the engine bay that has enough room. It is important to mount the siren face down to prevent water from accumulating in the voice coil. [5]
    6. Advertisement
Part 3
Part 3 of 3:

Wiring the Connections

PDF download Download Article
  1. This will be a wire off of the car alarm module. This switch will allow you to disable the alarm features while it is engaged. This will make it easier when someone else has your car, like when you leave it with mechanic.
  2. The car alarm LED light indicates when the alarm is armed. This light is usually mounted on the dash by drilling a small hole in the dash and running the wire to the car alarm module. The light is then mounted on the dash with superglue to keep it in place. [6] Be sure to look on both sides of the dash panel that and be sure that your drill will not hit any other parts. There is no need to take the dash off for this step as long as you can find a safe place to make your hole.
  3. If you have an external antenna, it extends the range of your wireless remote or keypad by receiving the signal from outside the car and transmitting it to the car alarm module. Most external antennas are glass mount antennas. This means that you will mount a receiver on the outside of your glass and a repeater on the inside of the same glass. The signal will be transmitted through the glass with no need to drill holes and the repeater wires directly to the antenna wire of your alarm module.
  4. The siren should have two wires, one negative and one positive. Most car alarms output a positive siren, so connect the alarm unit to the positive wire of the siren and connect the other siren wire to a ground. [7]
  5. The sensors are responsible for signalling that something is amiss and the siren should sound. You will connect the sensor wires from the car alarm to the wires that signal your door ajar or dome lights. [8] You can also connect them to the trunk and hood position sensors and the ignition switch depending on the features available with your alarm system.
    • It is recommended that you crimp these connections and do not simply twist them or use a wire nut. [9]
  6. You should hook the power wire of your alarm module to the batter or other constant power source. This will ensure the alarm is powered even when the car is turned off. Your alarm is now powered up and active.
  7. Be sure to replace them in the correct order so that all of the panels fit together properly. It is a good idea to consult your service manual for this step as well.
    8. Advertisement


Expert Q&A

Search
Add New Question
  • Question
    How long does it take to install car alarms?
    Evan Ernst
    Classic Automotive Enthusiast
    Evan Ernst is a Classic Automotive Enthusiast based in Spokane, Washington. Evan and his twin brother Nick are the founders of ClassicNation, an automotive enthusiast website. With over 36,000 YouTube subscribers, Evan and Nick share videos covering one of their many classic car restoration projects, an interesting 'featured ride', or helpful how-to repair videos.
    Evan Ernst
    Classic Automotive Enthusiast
    Expert Answer
    The time required to install a car alarm on a vehicle that doesn't already have one can vary, typically ranging from three to six hours, depending on skills and proficiency. The complexity of the installation process depends on the type of car alarm and its features. Some cars may be pre-wired, simplifying the electrical aspect of the installation. Basic car alarms, with features like door or window sensors, may take fewer hours, while more comprehensive systems with shock sensors, proximity sensors, and additional complexity could extend the installation time. In certain cases, especially with intricate electrical work and numerous sensors, the installation might surpass the six- to eight-hour mark.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 8 Helpful 15
  • Question
    How can I disable my alarm?
    Community Answer
    Unhook wires going to the battery. If that's not an option go to the control box, usually under the dash, and cut the red and black wires going in.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 30 Helpful 22
  • Question
    Will it be possible for a new key to be programmed for a car alarm without necessarily going through the installation process from the beginning?
    Community Answer
    It depends on the car. You can take your car to the dealer and they can reprogram the key for you. It will cost a bit of money, but it would be the best thing to do if you want it done correctly.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 14 Helpful 14
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • It is strongly recommended that you test the wire’s polarities before making connections. [10]
        Thanks
        Helpful 1 Not Helpful 1
      Advertisement

      Things You’ll Need

      • Car Alarm System
      • Car
      • Service Manual
      • Panel Removal Tools
      • Wire strippers
      • Drill
      • Drill Bit
      • Wire Crimpers/Solder Gun/Wire Nuts

      You Might Also Like

      How to
      Turn off an Airbag Light with or without a Scanner
      How to
      Find the 5 Digit Default Keyless Code on Ford Explorer or Mercury Mountaineer
      How to
      Deactivate OnStar
      How to
      Shut Off a Car Alarm That Won't Quit
      How to
      Reset a Factory Car Alarm
      How to
      Program GM Keyless Remotes
      How to
      Install Tweeters
      How to
      Peak and Tune a CB Radio
      How to
      Install a Tachometer
      How to
      Use Tesla Camp Mode to Stay Cozy on Your Trip
      How to
      Reset Aftermarket (Checkmate) Car Alarm
      How to
      Modify the Navigation System of an Acura
      Advertisement

      Expert Interview

      Thanks for reading our article! If you’d like to learn more about car maintenance and repair, check out our in-depth interview with Evan Ernst .

      References

      1. ↑ http://www.commandocaralarms.com/info_installing_a_car_alarm.asp
      2. ↑ http://www.crutchfield.com/S-tQmg77GftaR/learn/learningcenter/car/security_install.html
      3. ↑ http://www.crutchfield.com/S-tQmg77GftaR/learn/learningcenter/car/security_install.html
      4. ↑ http://www.commandocaralarms.com/info_installing_a_car_alarm.asp
      5. ↑ http://www.commandocaralarms.com/info_installing_a_car_alarm.asp
      6. ↑ http://www.crutchfield.com/S-tQmg77GftaR/learn/learningcenter/car/security_install.html
      7. ↑ http://www.commandocaralarms.com/info_installing_a_car_alarm.asp
      8. ↑ http://auto.howstuffworks.com/how-to-install-car-alarm.htm
      9. ↑ http://www.crutchfield.com/S-tQmg77GftaR/learn/learningcenter/car/security_install.html
      1. ↑ http://www.commandocaralarms.com/using_a_multimeter.asp

      About This Article

      Article Summary X

      Installing a car alarm involves removing your car’s panels, mounting the different components, and wiring everything together. The first thing you’ll need to do is remove the panels near the dashboard to access your car’s electronics. Then, mount the alarm somewhere hidden, like inside the dash or under a seat. You’ll also need to run a wire through the firewall to connect the car alarm to the siren. Mount the siren on the firewall or somewhere else in the engine bay. Make sure it’s face down to prevent water getting inside it. Other components you’ll need to wire in are the LED light, which indicates when the alarm is armed, and the external antenna for silencing the alarm remotely. Once you’ve mounted all of the components, connect the alarm to your door sensors and to your car’s battery to power it. For more tips, including how to work out the wiring layout of your vehicle, read on!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 241,190 times.

      Did this article help you?

      Advertisement