How to Level Table Legs

PDF download Download Article
PDF download Download Article

One of the most frustrating things in almost any setting is having a wobbly table due to uneven table legs. It can be off-putting for your meal, make working difficult, or even just be noisy! Luckily there are a few easy tricks to get your table nice and even so you aren't constantly dealing with a shaky table.

Method 1
Method 1 of 2:

Raising Shorter Legs with a Cork

PDF download Download Article
  1. This will give you an indication of which leg is shorter than the others.
    • Ideally, you will do this on a flat surface such as a work-bench.
  2. Leveling tools are long rectangular pieces of aluminum. They have a small tube of water in the middle of them with an air bubble. If your tool is on the surface and the bubble is within the lines that denote the middle, your surface is flat. [1]
    Advertisement
  3. Use a measuring tape or a ruler to make sure you are as accurate as possible. [2] The last thing you want is to measure incorrectly and be left with a still wobbly table.
    • If you’re struggling to hold the table steady and also measure at the same time then get someone else to hold the table for you.
  4. Use either a large knife or a fine-wood saw. Be careful to account for the fact that the glue you use to stick it will form a thin layer which may add to the correction length just fractionally.
    • Your cork will probably be in a circular disc shape and if it is wider than the leg you will be attaching it to, trim it down to size using your knife.
    • If you’re concerned about the color of your cork being different to your table, now is a good time to adjust it with some paint. [3]
  5. Using a strong adhesive here is important as you don’t want the cork to come loose. Make sure you give the glue at least 2-3 hours to dry. [4]
    • To help the cork get secure, putting some weight on it while the glue dries, like some heavy books, is a good option.
  6. It’s important to note here that if the adjustment is too large then you can always slice off a little bit of the cork to make it even. [5]
    • As the table will be putting weight down on the cork, it’s ok to turn it over while the glue is still drying. If you do this, however, don’t move the table around once you’ve flipped it.
    7. Advertisement
Method 2
Method 2 of 2:

Using a Table Saw to Trim Your Table's Legs

PDF download Download Article
  1. This may involve looking to see if any screws are loose or if the legs are properly glued on. If they are not, then this may be the source of the problem. [6] Simply screw back in or glue back on to make your table level again.
    • If you level out a table that has poorly attached legs then it will soon be wobbly again regardless of how accurate your corrections are.
  2. If the surface is not flat then the measurements may end up being off. This will result in your table being wobbly even after leveling. [7]
    • Check whether your surface is completely flat by using a leveling tool and seeing if the air bubble is within the middle markings on the tool.
    • You can find leveling tools very cheaply at any hardware store.
  3. Do this by gently wiggling the table back and forth to see which legs do not ever leave the ground. Either (but not both) of these legs is the one that you will be adjusting as they are longer than the ones that do move.
    • This is because the legs are on a plane, and the plane is not flat. Sawing down these longer legs will make the plane flat.
  4. At this length, the blade should barely above the surface. You can always feel free to increase the depth later on if need be but you should only be just grazing the surface of the legs. [8]
    • If your table saw doesn’t have a length setting this minimal, choose the smallest setting you have.
    • The measurements above are 1/64 of an inch and 1/32 of an inch, respectively.
  5. At this blade depth, the leg will receive a very small shave down. As you do it several times, the leg will get closer and closer to being flush with the rest of the legs. To get a clean cut, move the leg straight through the saw and at a gentle pace. [9]
    • Be careful not to overdo it as if you cut down too much of the leg, you’ll be left with a still wobbly table.
  6. This is simply to make the table look more presentable and to ensure that whatever surface you put it on will not be scratched. [10]
    • To use sandpaper, simply cup the paper in your palm and rub it firmly on whatever surface you are smoothing down.
    7. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    How do I fix uneven table legs?
    Jacob Pischer
    Home Improvement Specialist
    Jacob Pischer is a Home Improvement Specialist and the Owner of Helpful Badger, a home repair service in Portland, OR. With over four years of experience, Jacob specializes in a variety of handyman services including pressure washing, cleaning gutters, repairing drywall, fixing leaky plumbing fixtures, and repairing broken doors. Jacob studied at Madison Area Technical College and has a background in real estate investment.
    Jacob Pischer
    Home Improvement Specialist
    Expert Answer
    If your table legs are made of wood, they usually have a cloth pad underneath them to keep them from scratching the floor. If one of the pads fell off, you can just replace that with a sticky pad.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 1
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • When using the table saw, make sure you have safety goggles and, ideally, gloves as well. Table saws are extremely sharp and getting a finger caught in one would not be good!
        Thanks
        Helpful 0 Not Helpful 0
      Advertisement

      You Might Also Like

      How to
      Remove Drawers
      How to
      Price Used Furniture
      How to
      Raise the Height of a Table
      How to
      Fix an Office Chair Leaning to One Side
      How to
      Extend a Table
      How to
      Move Heavy Furniture Upstairs
      How to
      Attach Table Legs
      How to
      Brace a Wobbly Table
      How to
      Increase the Height of Dining Chairs
      How to
      Keep Two Twin Beds Together
      How to
      Deep Clean an Office Chair & Remove Stains
      How to
      Determine the Wood Type Used in Furniture
      The Best Ways to Move Large or Heavy Furniture by Yourself
      How to
      Move Heavy Furniture Without Help
      Advertisement

      References

      1. ↑ https://www.thisoldhouse.com/ideas/choosing-and-using-levels
      2. ↑ https://www.popularmechanics.com/home/interior-projects/how-to/g2538/furniture-problems-you-can-fix/
      3. ↑ https://www.mnn.com/your-home/at-home/blogs/how-to-fix-uneven-patio-furniture-legs-with-a-wine-cork
      4. ↑ https://www.networx.com/article/easy-fixes-for-uneven-table-legs ?
      5. ↑ https://www.mnn.com/your-home/at-home/blogs/how-to-fix-uneven-patio-furniture-legs-with-a-wine-cork
      6. ↑ https://www.networx.com/article/easy-fixes-for-uneven-table-legs
      7. ↑ https://youtu.be/WZFDo1f2tQs?t=43
      8. ↑ https://www.lifehacker.com.au/2015/10/level-wobbly-chair-legs-in-an-instant-with-a-table-saw/
      9. ↑ https://www.popularmechanics.com/home/interior-projects/how-to/a20772/fix-wobbly-chairs-easy/
      1. ↑ https://youtu.be/WZFDo1f2tQs?t=189
      2. ↑ Jacob Pischer. Home Improvement Specialist. Expert Interview. 4 September 2020.
      3. ↑ Jacob Pischer. Home Improvement Specialist. Expert Interview. 4 September 2020.

      About This Article

      In other languages
      Thanks to all authors for creating a page that has been read 57,458 times.

      Did this article help you?

      Advertisement