Download Article
Download Article
An origami banger, sometimes also known as an origami popper, is a fun paper project that makes a loud popping noise when you flick your wrist. Making an origami banger is a very simple origami project that you can use several times, and should take less than ten minutes to construct.
Steps
-
Begin with a flat piece of rectangular paper. These instructions were made for a standard piece of A4 printer paper, 8.5 x 11 inches (216 x 280 mm) in size. You may use larger paper instead (such as A3) for a louder sound. [1] X Research source -
Place the paper flat on the table. If your paper is the same color on both sides, you can make a small mark on one side to keep track. This shouldn't be necessary for this project, but it's a useful technique to know about when making origami out of regular paper. [2] X Research sourceAdvertisement -
Crease your paper in half horizontally along the center.As you make each fold, run your fingernail or a creasing tool, such as a bone folder, along the crease. This will make each fold sharp and crisp, giving a clean, professional finished shape. Once you're done, unfold it so that the paper is laying flat again.
- At this stage, the orientation of your paper doesn't matter, but you want to make sure that you are making a valley fold. When you unfold the paper the crease should look like the bottom of a valley
-
Fold your paper in half vertically along the center. Once again, after you have made a crease, unfold it.
- You should now have two creases in your paper when it lays flat, creating a cross in the center.
Advertisement
-
Fold the top corners to meet the centerline. Rotate your paper if necessary so the short side faces you. Now fold the top corners into the vertical centerline. [3] X Research source
- Your folds won't reach the horizontal crease. Think of it like you’re folding a paper airplane .
-
Fold the bottom corners into the centerline. Just as before, fold the corners on the other end of your paper into the centerline. You should now have two folded over triangles with a space of flat paper in the middle.
-
Turn your paper so that it’s horizontal again. Your origami banger should now be lying flat on the table with two folded triangles on either side of your paper and a lane of flat paper running vertically down the middle.
-
Fold your paper over in half vertically. Now you want to fold your paper up along the horizontal centerline.
- If done correctly, you should now have a trapezoid shape with a long, flat bottom, and a smaller flat top to it.
Advertisement
-
Fold the left and right corners inward to meet the crease. Position the trapezoid so the short side is facing you. Fold the top left corner inward to meet the vertical center crease. Fold the top right corner inward to meet the crease as well. [4] X Research source These corners should stick out past the short side of the trapezoid, meeting to form a diamond.
-
Flip the paper over. Pick up the paper and turn it over on the table, from left to right. There should be two flaps of paper on top that do not quite meet the bottom corner of the diamond.
-
Fold the left corner over to meet the right. Fold the left corner over to the right, creasing along the same centerfold. You now have an origami banger, which looks like a triangle.
-
Hold the banger at the bottom corner. Hold the bottom corner between your thumb and finger, with the longest side of the triangle facing you. Make sure you are only holding the two outer layers of paper, not the flap inside.
-
Bring the banger down fast to make a noise. Hold the banger above your head. Swing your arm down as fast as you can, snapping forward with your wrist at the same time. The inner flap of the banger should pop out into a "balloon" in front of the banger, making a noise. It may take a few tries to get this to work. [5] X Research source
- If you're having trouble getting this to work, try tugging the innermost flap out a tiny bit.
- To re-use the banger, just gently push the paper back in. You might need to experiment with the positioning of the flap.
Advertisement
Expert Q&A
Search
-
QuestionWhat type of paper should I use so it produces a louder noise?Coco Sato is an Origamist and Contemporary Artist based in Brighton, UK. She is an award-winning contemporary artist specializing in origami and geometric sculptures. With a multidisciplinary practice encompassing sculpture, performance, psychology, and geometry, she explores shifting perspectives through the intricate art of origami. Coco’s work bridges cultures by combining traditional Japanese aesthetics with contemporary concepts, inviting audiences to reconsider their relationship with the world.You’ll want to use thicker paper, like cardstock or heavy-weight copy paper, which will create more tension when you snap it, which leads to a louder bang. The paper needs to be sturdy enough to hold its shape but flexible enough to snap when you pull the ends apart. A regular origami paper is typically thin, which might not produce the loud bang when you use a thicker paper. So, if you're aiming for a really loud sound, use a heavier and thicker paper.
-
QuestionCan this be done with a rectangular piece of paper?Community AnswerYes. The original pattern for an origami banger uses a rectangular piece of paper.
-
QuestionWhere do I hold an origami banger?Community AnswerYou hold the banger with the longer side of the triangle facing you. Your fingers should be resting on the point with only two layers.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
- These break easily, so don't get frustrated if the banger doesn't last long.Thanks
- Make sure the long edge is facing you, or it won't bang.Thanks
- The thinner the paper, the louder the bang.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Warnings
- It's not a good idea to use this in school, or a quiet place.Thanks
Advertisement
Things You'll Need
- A large, thin rectangular piece of paper
Expert Interview
References
About This Article
Thanks to all authors for creating a page that has been read 204,681 times.
Reader Success Stories
- "The article helped. It's the first thing I've ever made with paper. Thank you, wikiHow."
Advertisement
"The article helped. It's the first thing I've ever made with paper. Thank you, wikiHow."
"It helped me to scare my sister. "
"Great for creative people. "
"It was a good instruction."
