PDF download Download Article PDF download Download Article

For many people, including tree professionals and orchard growers, painting trees is a common form of first aid for tree damage from storms or after pruning. Paint can also help trees resist harm from insects, disease, and dehydration. If you want to know how to paint a tree, you have to choose both the paint and the application method. Although painting trees is a common procedure, it is also somewhat controversial. Quite often, it’s actually better to not paint a tree at all but just let it heal itself.

Method 1
Method 1 of 3:

Protecting Orchard Tree Trunks

PDF download Download Article
  1. This procedure has been shown to protect against animals that will eat the bark of the tree, and also protects against boring insects that would otherwise work their way into the trees’ trunks. [1]
    • Paint trees at least annually in the early spring before insects are active.
    • Painting fruit- and nut-bearing trees can also prevent the bark from splitting
  2. This mixture is most effective when combined at a 1:1 ratio. You can simply combine 1 gallon (3.79 liters) of water with 1 gallon (3.79 liters) of paint to achieve the proper consistency.
    • White paint is more likely to reflect sunlight and, thereby, reduce heat damage. [2]
    • Latex paint contains polymer binders to fill and hold splits and cracks.
    Advertisement
  3. This tool will be most effective and help you reach all the cracks in the bark of the tree. Dip your paintbrush into the water/paint mixture until the bristles are about halfway submerged, then withdraw the brush and apply directly to the tree trunk.
    • Paint up to the first line of branches. Rodents such as mice, voles, and rabbits will not be able to reach higher than this on the tree, so there’s no need to paint the upper portions of your trees.
  4. This will ensure maximum coverage of the tree trunk, and will allow the paint to seep into gaps or cracks in the bark.
    • Allow excess paint to drip down the trunk as you go. You don’t need to wipe up or clean dripping paint.
    • Use an airless paint sprayer if speed and convenience are a priority, but make sure paint still reaches into cracks and splits in the bark.
  5. In instances where boring insects are persistent or not discouraged by the 1:1 mixture of latex paint and water, you may need to apply the paint at a thicker consistency. [3]
    • Start with a 3:1 mixture of paint to water. If this still doesn’t deter boring insects, you may need to apply the latex paint directly to the tree trunk.
  6. Advertisement
Method 2
Method 2 of 3:

Protecting Damaged Trunk Areas

PDF download Download Article
  1. This practice is especially common among orchards where trees are pruned. Although there is no substantial evidence to support this claim, painting the wounded or pruned sections of a tree has traditionally been thought to protect the exposed area from invading insects, and to allow the tree to heal more quickly. [4]
    • This practice is also commonly referred to as “wound dressing.”
  2. Despite the general ineffectiveness of wound dressing to help trees recover from damage, the procedure has been shown to have some use in preventing fungal infection. However, there are also indications that pruning painted trees can trap moisture in the wound – which encourages fungal infection. [5] [6]
    • Tree painting may also be useful in preventing oak wilt. This disease is caused by a fungal pathogen, and effects trees primarily in the Eastern United States. Tree paint should be applied to trees pruned or wounded in this region—especially if the pruning is done during the spring or summer.
    • Oak-wilt spores are carried by insects, and tree paint is a sufficient deterrent to keep the insects from boring into the exposed tree wood and spreading oak wilt.
  3. You want the paint to adhere to the cut or wounded portion of the wood, not to any remnants of bark that may still be on the wood.
    • It’s best to wear thick work gloves while you’re brushing the bark and dirt off of a tree. Otherwise you may wind up with a hand full of splinters.
  4. Your local hardware store will stock a variety of tree paint brands. Work with the sales staff to choose one that best suits your needs.
    • Avoid tree paints that contain asphalt, as these can raise the internal temperature of a tree to a harmful level. [7]
    • Also avoid paints that contain petroleum-based solvents. These can damage the tree as it tries to heal. [8]
  5. When applying, fully cover the wounded or pruned area with a thick layer of paint. In addition to covering the exposed wood, you should also paint up to 2 inches (5.08 centimeters) beyond the edge of the cut.
    • This extra coverage will seal the wound’s edges and prevent any boring insects from sneaking in around the perimeter of the painted area.
  6. Advertisement
Method 3
Method 3 of 3:

Choosing an Organic Treatment

PDF download Download Article
  1. Although the method of applying petroleum-based paints to damaged or pruned trees has persisted (and many hardware stores stock wound-dressing products), it has not been shown to help trees. [9]
    • Wound dressing trees may prevent the trees from forming callouses, which trees use to protected wounded areas.
    • Dark-colored tree paint—especially paint that contains asphalt—on a tree’s trunk will raise the tree’s temperature, often to a harmful degree. [10]
  2. Contrary to helping a wounded or pruned tree, wound dressing can actually be harmful.
    • Painting tree wounds may interfere with the tree’s growth of “scar tissue”-like wood.
    • Wound dressing can also seal in excess moisture (which is unhealthy for the tree) and can trap harmful bacteria and fungi inside of the tree. [11]
  3. In most cases, trees do not need to be painted in order to resist fungal or insect infestations. Trees already have natural methods of protecting and defending themselves from foreign invaders, and do not need human help. [12]
    • If you prefer to take an active role, apply an organic dressing that contains beeswax and lanolin to protect the wound’s surface moisture.
    • You may also apply a light coating of insecticide or fungicide to the wounded or pruned wood. [13]
  4. Unlike human bodies, trees do not “heal” wounded flesh. Rather, they use a process called compartmentalization, by which a tree can internally seal off damaged areas [14]
    • This is a natural process, and one which trees do not need assistance to perform. The scar tissue that develops from compartmentalization protects the tree from fungus and blocks the undamaged parts of the tree from invasive insects.
    • Just below the bark on a tree are systems that carry nutrients and fluids throughout the tree. These will transfer nutrients within the tree and help compartmentalize when a section has been damaged.
  5. Often tree wound dressing is applied to poorly pruned trees, in an effort to “heal” them from the effects of poor pruning. If a tree is properly pruned, the tree will not need to be painted. [15]
    • When you prune a limb, cut as close to the trunk as you can. Make the cut close to vertical (do not prune tree limbs at an angle). The vertical cut will have a smaller surface area than a diagonal cut, and will leave the tree with less surface area exposed.
    • Prune trees in the winter, when their growth has slowed and insect infection rates are lower. [16]
  6. Advertisement

Community Q&A

Search
Add New Question
  • Question
    What type of paint is safe to use on a tree trunk?
    Community Answer
    Any type of paint will harm the tree.
  • Question
    Does the latex paint have to be exterior paint?
    Techdocgeek
    Community Answer
    If the tree is outdoors, that is advised. Exterior paints last longer outdoors than interior paints.
Ask a Question
      Advertisement

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • If you use an airless paint sprayer for speed and convenience, recognize that there is possible damage from the paint’s drift on the air, and take precautions to protect the remaining tree and other nearby trees.
      • Specific trees in certain regions are particularly susceptible to pathogens entering through wounded areas. In these cases, immediate attention by a professional arborist is recommended.
      Advertisement

      Things You’ll Need

      • Wide, thick, loosely napped paint brush and pail
      • Airless paint sprayer
      • Drop cloths and rags
      • White latex paint
      • Distilled water
      • Safety equipment, including gloves and goggles
      • Commercial pruning dressing
      • Orange shellac
      • Organic wound dressing

      About This Article

      Article Summary X

      To paint a tree for protection against insects and animals, start by mixing 1 part white latex paint with 1 part distilled water to get the right consistency. Then, dip a wide, loosely napped paintbrush into the paint until the bristles are halfway submerged. Next, paint the tree trunk up to the first line of branches. For wounded or pruned areas on the truck, apply a thick layer of paint 2 inches past the edges of the cut portion to keep out insects. For tips on how to paint a tree to prevent fungal disease, read on!

      Did this summary help you?
      Thanks to all authors for creating a page that has been read 60,049 times.

      Did this article help you?

      Advertisement