Q&A for How to Customize Your Guitar

Return to Full Article

Search
Add New Question
  • Question
    What kind of markers do I need to customize my acoustic guitar permanently?
    Community Answer
    Sharpies, the permanent kind. Then use clear top-coat nail polish to make it permanent. You can buy top coat at any local drugstore.
  • Question
    If I was to paint a design around the hole on an acoustic guitar, would acrylic paint work?
    Community Answer
    Yes, however, you will want to put a varnish on top and possibly a base as well to make sure that it doesn't come off.
  • Question
    Where do I buy colored knobs and strings?
    TIckley Pickle Wiggle
    Community Answer
    Both Amazon and Guitar Center have tuners and strings. Metal strings most likely won't have color (besides their natural brassy color), and acrylic strings aren't the best quality when found in different colors.
  • Question
    What if it's not an electric guitar?
    Community Answer
    It doesn't really matter. You can still customise your guitar whether it semi acoustic, just acoustic or electric.
  • Question
    I was thinking of drawing some details on the fret-board itself with an acrylic paint pen. Is there a way to do that and preserve it or is it a bad idea?
    Yesgirl
    Community Answer
    Draw in sections between the strings, make sure no paint gets onto the strings, as it will make it sound bad. After that, use some Mod Podge to seal it up so it won't be scratched off easily.
  • Question
    Can you just use masking tape to cover up bits you don't want to spray?
    Community Answer
    Yes, since it's masking tape, it's fairly safe to use on guitars as it won't strip the finish off your guitar when removed. However, test a small piece first, just to be sure and remove very gently when done.
  • Question
    I have an Ibanez semi-hollow body guitar with flat black paint. There's also an engraving from a computer, very small fine lines - how do I get the pain out of that?
    Chase Ogden
    Community Answer
    You can try using an Exacto knife to try to scrape it out. This is a method that should be done carefully, seeing as it could mess up the paint on the main surface.
  • Question
    What would you recommend if you wanted the inlay decals to be more permanent?
    Chase Ogden
    Community Answer
    If you have a steady hand and are good with engravers, you can use the engraver to make a more permanent inlay decal. This has worked for multiple friends who own guitars. I personally would recommend a small handheld one to have a better grip and easier movement.
  • Question
    How do you change your straps?
    KAILYNN 7519911
    Community Answer
    Go to a guitar store, buy a strap that will fit your guitar. If you have pegs on the bottom and the neck of the guitar, there are holes on each end of the strap to put it there. Put one guitar peg in each hole. If your guitar just has one peg on the bottom, get a string and tie it to the top hole of the strap. Then tie the string to the head of the guitar, right above the nut.
Ask a Question

      Return to Full Article