Download Article
Download Article
By the time you see any type of flaking coming out of the jets of a whirlpool bathtub, it's already too late. The flaking is remnants of bacteria, mostly harmful, condos that have now decayed and are ruining your vision of a relaxing spa bath. However, this wikiHow can explain how to avoid the problem.
Steps
-
Don't use bleach. This is because, over time, it will breakdown gaskets, bushings, etc. Using any dishwashing detergent is also not recommended, since it will put a coating layer on the flaking you are trying to remove. [1] X Research source
-
Fill the jetted tub. It should be up with warm water and about 1" about the highest jet. [2] X Research source
- Other non-toxic approaches, include the use white vinegar to clean the jets in a bathtub.
Advertisement -
Add a non-toxic bio cleaner to the water. Per the instructions on the cleaning product label, normally it is 1 teaspoon or 1 capful, depending upon the bio cleaner.
-
Run the jets. Turn off the air valve if you have one, on high for 10-15 minutes. This allows the bio cleaner to scrape off the gunk (flakes) that are solidified on the pipe and jet walls. [3] X Research source
- Bio Cleaners use special properties that are ecological, green, and non-toxic and can eradicate bacteria, algae, mold, mildew, dead skin, soaps, and other gunk in the piping and remove them to the sides of the tub.
-
Clean the bathtub. When you have completed the 10-15 cleaning cycle, remove 2 inches (5.1 cm) of water, clean the "ring around the tub", refill with 2 inches (5.1 cm) of water and repeat the process. You will have to add more bio cleaner in as well. [4] X Research source
-
Clean it once a week. To maintain a clean jetted tub, you need to clean it once a week, preferably after a bath to save on water. [5] X Research source
Advertisement
Expert Q&A
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
- Use a paper towel or a cleaning rag to wipe the gunk off the tub sides.Thanks
- All bio cleaners are non-toxic and septic/sewer safe.Thanks
- Most bio cleaners have clarification properties in them so use the water in the tub to wipe down the bathtub.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Warnings
- Even though bio cleaners are non-toxic, and safe to touch with bare hands and skin, it is advisable to use rubber gloves when cleaning the gunk.Thanks
Advertisement
Expert Interview
Thanks for reading our article! If you’d like to learn more about cleaning hacks, check out our in-depth interview with James Sears .
References
- ↑ https://www.apartmenttherapy.com/how-to-clean-bathtub-jets-with-basic-household-ingredients-207786
- ↑ https://www.usinspect.com/blog/what-are-those-black-flakes-my-whirlpool-tub/
- ↑ https://www.bobvila.com/articles/how-to-clean-a-jetted-tub/
- ↑ https://www.bobvila.com/articles/how-to-clean-a-jetted-tub/
- ↑ https://www.usinspect.com/blog/what-are-those-black-flakes-my-whirlpool-tub/
About This Article
Thanks to all authors for creating a page that has been read 79,526 times.
Advertisement