How to Reset a BIOS Password

PDF download Download Article
An easy-to-follow guide on resetting a BIOS password if you've forgotten it
PDF download Download Article

This wikiHow teaches you how to reset your Windows computer's BIOS password. You can do this by trying a master BIOS reset password, or you can attempt to remove your BIOS' memory battery. Keep in mind that not all BIOS manufacturers include a master reset password, and not all computers allow you to access the battery. If none of these methods work for you, then you'll have to take your computer into a tech repair shop or contact the manufacture.

Method 1
Method 1 of 3:

Using a Master Password

PDF download Download Article
  1. Turn on the computer and enter the wrong password three times. This will lock the computer and display a "System Disabled" message. Don't worry, when you restart the computer it will go back to normal and no data will be lost. You need to do this in order to see the code required to find the backdoor password.
  2. When you see the "System Disabled" message, you'll see a series of numbers and letters. Write this down, as you'll need it to find the password later.
    Advertisement
  3. Visit bios-pw.org/ on another computer's web browser. This website can generate backdoor passwords based on the code that was displayed. [1]
  4. The website will attempt to generate a password that matches your computer. You may be given several passwords to try.
    • Note: If you didn't get a code when the system was disabled, your computer may use its own serial number to generate a backdoor password. Click the "More details" link at bios-pw.org/ and follow the instructions to download and run the correct script for your computer's manufacturer.
  5. You'll be able to enter three incorrect passwords before your system is locked and you have to reboot again. Ideally, one of the stock BIOS passwords listed on the BIOS Master Password site will unlock your computer.
    • If none of the passwords listed here unlock your computer, you'll need to try the next method.
  6. Change your BIOS settings if you get in. After entering the correct password, make sure that your BIOS settings are correct so that you won't be locked out again. Unlike the methods below, entering the backdoor password will not reset your BIOS settings.
    7. Advertisement
Method 2
Method 2 of 3:

Removing the CMOS Battery

PDF download Download Article
  1. It's recommended that you use the master password method above if possible. If the passwords didn't work or if your search returned no results, then you may be able to reset the password by removing and reinserting the CMOS battery. [2]
    • The CMOS battery looks like a watch battery, and it powers the motherboard even when the computer is unplugged. This might be how the password is stored on your motherboard along with the system time and your computer's BIOS settings. Removing and reinserting the battery will clear all of these settings.
  2. Before opening your desktop's case, it's recommended that you detach all of the cables that are currently attached to the back. [3]
    • Make sure that the power cable has been detached.
    • You may be able to perform this method on a laptop as well, but it will require removing the protective case from the back of laptop. You will usually need to remove all of the other panels as well as the battery to get access to the motherboard.
  3. This will dissipate any charge remaining in the motherboard's capacitors, reducing the risk of electrostatic damage.
  4. Most desktops have thumbscrews, though you may need a Phillips-head screwdriver to loosen or remove the screws.
    • You may find it easier to lay the desktop on its side on a table or workbench so that you can easily access the inside without having to bend over.
    • Click here for more detailed instructions on opening a laptop computer.
  5. Ground yourself . Before touching anything inside your computer, you should ground yourself to discharge any built-up static electricity. If you discharge when touching a sensitive component, it could damage or destroy it. [4]
    • You can quickly ground yourself by touching a metal water tap.
  6. It will be silver and is typically located along the edge of the motherboard. The battery is about 1/2 inch in diameter. [5]
  7. Most batteries are held in by one or two small clips. Gently pull the battery out of the socket and set it to the side.
    • Note: Some batteries may be soldered to the motherboard and are not removable. If this is the case and you'll have to use a reset jumper, see the next section.
  8. This will ensure that the BIOS settings are completely cleared.
  9. After waiting about thirty seconds, you can return the battery to its socket. Make sure you are inserting it with the correct side facing up.
  10. You shouldn't need to get back inside the computer after this, so make sure to close it up completely.
  11. Power on the computer and enter the BIOS . Press the BIOS setup key as the system is booting up. Since you've reset the BIOS, things like your system clock will need to be reset. Any settings changes that you previously made in the BIOS, such as drive assignment or boot order will need to be set again. [6]
    • If the password still has not been removed, then that means that the BIOS password can't be reset by removing the CMOS batters. In this situation, follow the steps below.
    12. Advertisement
Method 3
Method 3 of 3:

Resetting Jumpers

PDF download Download Article
  1. See the Steps 2-5 of the previous section for more details.
  2. Locate the BIOS reset jumper . This jumper is typically two pins, and is almost always blue. It is usually located near the silver CMOS battery (it looks like a watch battery), but this certainly isn't always the case. Refer to your computer or motherboard's documentation if you are having difficulty finding it. [7]
    • The jumper may be labeled CLEAR CMOS, CLEAR, CLR, JCMOS1, PASSWORD, PSWD, etc. [8]
    • If you don't have a reset jumper (and not all computers do), and you've tried the methods above, then you'll have to contact the manufacturer.
  3. Most BIOS jumpers are installed on two of three available pins. Moving the jumper over by one pin will reset the password. [9]
    • For example, the jumper is covering pins 1 and 2. Move the jumper so that it is covering pins 2 and three.
    • If there are only two pins available, removing the jumper completely will reset the password.
  4. This will ensure that the BIOS sees the changes made by the jumper and clears the password. [10]
  5. After waiting for about thirty seconds, you can return the jumper to its original position.
  6. You shouldn't need to get back inside the computer after this, so make sure to close it up completely.
  7. Press the BIOS setup key as the system is booting up. Since you've reset the BIOS, things like your system clock will need to be adjusted. Any settings changes that you previously made in the BIOS, such as drive assignment or boot order will need to be set again.
    8. Advertisement

Community Q&A

Search
Add New Question
  • Question
    If I have forgotten my BIOS password, do I need to use the original HDD if I use the back door?
    Community Answer
    No, the BIOS is independent from your hard drive and starts before the hard drive can be accessed.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 11 Helpful 42
  • Question
    How can I get into the BIOS if my computer screen shows up first asking for a password?
    Community Answer
    That's detailed in this article. If you immediately get a password without seeing your operating system starting up, you're most likely looking at the BIOS password screen.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 32 Helpful 115
  • Question
    Does a backdoor password work for a desktop computer? Will resetting the bios setting with any of those methods do any harm to OS?
    Community Answer
    It may work for a desktop computer. Also, no it won't harm your OS. It will be the same and your system will be exactly how you left it.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 15 Helpful 38
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      • If none of the above steps worked, then contact the PC manufacturer, if you can prove you are the owner of the PC, they will probably have you send it in to their maintenance center to have the password reset.
        Thanks
        Helpful 5 Not Helpful 5
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • Make sure to properly ground yourself if you open up your computer. If you don't, you could break your computer.
        Thanks
        Helpful 4 Not Helpful 0
      • Never attempt to break a BIOS password for a computer that doesn't belong to you without explicit permission from the owner.
        Thanks
        Helpful 6 Not Helpful 5
      Advertisement

      You Might Also Like

      3 Ways to Reset a Computer’s BIOS: Software & Hardware Methods
      How to
      Change Computer BIOS Settings on a Windows PC: Guide
      Easy Guide to Updating the BIOS on a Computer (Windows)
      How to
      Access the BIOS on Any PC: Guide + Troubleshooting
      How to
      Bypass iPhone Passcode
      How to
      Hack Screen Time: 12 Easy Workarounds to Try
      The Ultimate Guide to Hacking for Beginners
      How to
      Stream PS5 to Discord: Remote Play, Capture Card, or Voice Chat
      How to
      Use Cheat Engine
      How to
      Find Out a Password: 8 Tricks to Gain Access to Accounts
      How to
      Hack Gmail
      How to
      Crash Your Computer Using a Batch File
      How to
      Hack a PlayStation Portable
      A Simple Guide to Creating a QR Code to Your Google Form
      Advertisement

      References

      1. ↑ https://bios-pw.org/
      2. ↑ https://www.computerhope.com/issues/ch000235.htm
      3. ↑ https://www.computerhope.com/issues/ch000235.htm
      4. ↑ https://www.computerhope.com/jargon/w/wrisstra.htm
      5. ↑ https://www.computerhope.com/issues/ch000235.htm
      6. ↑ https://www.computerhope.com/issues/ch000235.htm
      7. ↑ https://www.dell.com/support/kbdoc/en-ph/000124377/how-to-perform-a-bios-or-cmos-reset-and-clear-the-nvram-on-dell-systems
      8. ↑ https://www.howtogeek.com/131623/how-to-clear-your-computers-cmos-to-reset-bios-settings/
      9. ↑ https://www.intel.com/content/www/us/en/support/articles/000025368/processors.html
      1. ↑ https://www.asus.com/support/FAQ/1040820/

      About This Article

      Article Summary X

      1. Enter the wrong BIOS password 3 times.
      2. Write down the "System Disable" number.
      3. Go to https://bios-pw.org .
      4. Enter the number you wrote down.
      5. Click Get Password .
      6. Restart the computer and try the new password.

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 2,135,256 times.

      Reader Success Stories

      • Nick Talb

        May 25, 2017

        "I've used other backdoor passwords and decrypters, but this one really worked and fixed a year-long problem, ..." more
      More reader stories Hide reader stories
      Share your story

      Is this article up to date?

      Advertisement