PDF download Download Article PDF download Download Article

Getting your braids done takes a lot of time (and money), and the last thing you want to see is your ends unraveling, getting frizzy, or curling up on themselves. Thankfully, there’s a super simple process called “dipping” that helps straighten, set, and seal your beautiful braids. The entire process shouldn’t take you more than 15 minutes, and you can do it right after you get your hair braided or anytime your hair needs a refresh.

Method 1
Method 1 of 2:

Dip and Seal Your Braids

PDF download Download Article
  1. This is totally optional—some people love it while others prefer to skip it altogether and go straight to dipping their braids. If you want to, use nail glue or super glue. Just put a few drops on the end of each braid to help them last longer. [1]
    • These types of glues dry incredibly fast. Even so, make sure your braids are completely set before moving on to dipping your braids.
    • You really shouldn’t use glue on your natural hair. If you do, apply it at the ends and keep in mind that you might have to trim off that part once you’re ready to take your braids out.
  2. Use a pot on the stove, a tea kettle, or a bowl in the microwave—the method doesn’t make a difference as long as the water heats up! Heat enough water to fill a big pitcher. [2]
    • Dipping your braids in hot water (rather than cold or warm water) keeps the ends straight and frizz-free, and it helps keep them from coming undone. It’s an easy way to set newly-done braids or to refresh older ones.
    Advertisement
  3. Be super careful and protect your hands with a towel or oven mitt if needed. Avoid using thin, plastic containers or glass ones, as they can get too hot to handle. [3]
    • Squeeze 2-3 drops of baby oil into the pitcher to give your braids a nice, natural shine. [4]
  4. Depending on how much hair you have and how thick your braids are, working in sections might be easier than trying to treat all your braids at once. The call is totally up to you, though. [5]
    • Tie or clip up half of your hair to do the bottom section first. Or, do the left side first before switching to the right side.
  5. Saturate the braids as high up as you can go—the deeper you dip, the smoother your braids get. Everyone has their own rhythm they like to follow, and there isn’t a set “right” way to do this. As an example, try dipping your braids up and down 4-5 times and holding them in the water for 5-10 seconds each time. [6]
    • If the pitcher is too hot to handle with your bare hands, wear a pair of gloves. [7]
    • If you’re doing this for someone else, put a towel across their back to keep them from getting wet.
  6. After you’ve dipped the ends of your braids, wrap them in a towel. Pull down on your braids and stretch them straight. Repeat until your braids are just slightly damp. [8]
    • This is a super important part of the process. The pulling and stretching keep the ends of your braids from curling or getting matted.
    • Dip and dry one section before moving on to the next.
  7. If your braids are done to the end or if you used glue to seal them, this isn’t something you have to worry about. But, if the tips of your hair are unbraided, brushing them helps keep them straight and tangle-free. [9]
    • Use a hard bristle brush or whatever your favorite detangling brush is.
  8. Advertisement
Method 2
Method 2 of 2:

Braid Maintenance Tips

PDF download Download Article
  1. It takes a long time to get your braids done, and you want them to look fresh for as long as possible! Silk or satin lets your hair slide across rather than rub against the pillowcase, which means your braids look nicer for longer. [10]
    • A silk or satin scarf or bonnet works just as well as a pillowcase.
  2. Focus the mousse on your scalp, and don’t be afraid to really coat your braids. Once the mousse is in place, pull your hair back into a ponytail and cover it with a silk scarf. Wait for an hour, then undo your frizz-free locks. [11]
    • If there is any mousse leftover, massage a few drops of grapeseed or jojoba oil into your braids. The oil gets rid of the mousse and leaves your hair with a beautiful shine.
  3. Submerge a clean towel in a pot of boiling water, then remove it (carefully!) with a pair of tongs. Let it cool down enough to touch it without getting hurt, and lay it over your scalp and braids. Leave it until the towel cools off, then take it off and let your hair dry. Your braids should be less frizzy and look refreshed! [12]
    • Since the towel is so wet and there’s no way to wring it out because of how hot it is, it’s best to do this in the bathroom or kitchen where it won’t matter if water drips on the floor.
  4. Fill a small spray bottle halfway with witch hazel. Add 3 to 5 teaspoons (15 to 25 mL) of distilled water and 10 drops of lavender essential oil. Spritz your scalp with this solution whenever you notice it feeling dry, itchy, or looking flaky. [13]
    • If you aren’t interested in mixing your own spray, there are ones you can buy at the drugstore specially made for braids. [14]
  5. once every 1-3 weeks to keep your hair from drying out. Use a lightweight shampoo so your braids don’t get weighed down. To clean your scalp, wet a cloth and run it between your braids. [15]
  6. Braids aren’t meant to last forever, so plan on taking them out within 2 months after getting them put in. And remember, the better you care for your braids while you have them, the longer you can go between getting them done! [18]
    • The type of braid you use will determine how long you can keep them in. For instance, cornrows aren't going to last as long as box braids. [19]
    • You can undo your braids yourself or have your hairstylist do it for you.
    • Keeping your braids in for too long can cause your hair to break and become brittle.
  7. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    How do I clean product buildup off my scalp?
    Ndeye Anta Niang
    Hair Stylist & Master Braider
    Ndeye Anta Niang is a Hair Stylist, Master Braider, and Founder of AntaBraids, a traveling braiding service based in New York City. Ndeye has over 20 years of experience in African hair including braiding box braids, Senegalese twists, crochet braids, faux dread locs, goddess locs, kinky twists, and lakhass braids. Ndeye was the first female of her tribe in Africa to move to America and is now sharing her knowledge of African braids passed on from generation to generation.
    Hair Stylist & Master Braider
    Expert Answer
    Mix 3 parts warm water with 1 part apple cider vinegar and soak a few baby wipes in it. Squeeze the excess liquid from one of the wipes, then use that to clean in between your braids. Do that 3 times, using a new wipe each time, then let your hair air out until the vinegar smell evaporates. Afterward, apply leave-in conditioner or very light hair oil or lotion.
Ask a Question
      Advertisement

      Tips

      • If you have extensions and deal with a lot of flyaways, trim them with shears. Just be careful only to cut your extensions and not your natural hair. [20]
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • Be careful when handling boiling water! Protect your hands with hot pads or towels, and watch out for the steam.
      Advertisement

      Things You’ll Need

      Dip and Seal Your Braids

      • Glue (optional)
      • Pot or tea kettle
      • Plastic pitcher
      • Towels
      • Hard bristle brush

      Braid Maintenance Tips

      • Silk or satin pillowcase
      • Water-based mousse
      • Towels
      • Braid spray
      • Lightweight shampoo

      About This Article

      Thanks to all authors for creating a page that has been read 63,703 times.

      Did this article help you?

      Advertisement