PDF download Download Article
Learn exactly when, why, and how to use the Albright special
PDF download Download Article

Ready to head out for an early morning fly fishing trip? If so, we have the perfect knot for you! The Albright Knot (also known as the Albright Special) is a strong knot that’s relatively easy to tie. It’s also one of the favorite knots for tying the fly line to the backing line for fly fishing. This article takes you through how to tie an Albright Knot with step-by-step instructions. We’ll also cover the uses and advantages of this versatile knot, plus alternate knots to cover all your knot-tying needs.

The Albright Special Knot: Quick Tying Steps

  1. Make a loop in the heavier line.
  2. Pass the end of the light line through the loop.
  3. Wrap the light line around both ends of the loop 5-12 times.
  4. Thread the light line through the loop.
  5. Pull the light line to tighten the knot and clip the ends.
Section 1 of 5:

How to Tie an Albright Knot

PDF download Download Article
  1. Try to pass about 10-12 inches (25.4-30.5 cm) of line through the loop so there’s enough to make the knot. [1] If you have lines of different diameters, make the loop with the heavier line. [2] Then, thread the lighter line through the loop back-to-front.
  2. For this knot, it doesn’t matter if you make your wraps clockwise or counterclockwise. Just make sure you keep them flat, tight, and neat without overlapping or twisting the line. [3]
    • If your lines are drastically different sizes , make 8-12 wraps.
    • If your lines are roughly the same size , make 5-8 wraps.
    • If you’re using a wire leader or tippet , make sure you have a pair of pliers on hand to help you bend the wire. [4]
    • A leader is a transparent monofilament that connects the fly with the line. [5]
    Advertisement
  3. After you finish your wraps, thread the end of the lighter line through the loop at the end. Move from the back so you pull the end of the line through to the front. [6]
    • It doesn’t actually matter if you pass the line through the loop back-to-front or front-to-back as long as you go in the same direction you did when you started the knot.
  4. Hold on to the ends of the heavy line. Then, pull the lighter line’s end in the opposite direction to tighten the knot. Clip the hanging ends of both lines. [7]
    • If the knot gets stuck on the heavy line as you tighten it, gently slide the wraps along the heavy line to where it loops over the lighter line. Try to keep the wraps in a neat, flat row as you tighten the knot.
    • Alternatively, wrap the lighter line 3-5 wraps around the loop before you pull toward the loop to tighten it to make an even stronger Improved Albright Knot. [8]
    • Lightly wet the knot to help the line stick and keep the knot tight. You can also coat your knot with a drop of rubber cement to make it more secure.
  5. Advertisement
Section 2 of 5:

Uses of the Albright Knot

PDF download Download Article
  1. The Albright Knot is a great choice for joining monofilament to the braided line and braided line to the wire. It’s also one of the most common knots anglers use to tie lines that have different diameters. The Albright knot is especially useful for tying a backing line to a fly line for fly fishing . Other uses for an Albright Knot are: [9]
Section 3 of 5:

Advantages of the Albright Special

PDF download Download Article
  1. The Albright Special knots are especially secure and reliable when joining 2 lines of different diameters, and they’re versatile enough to be used in both freshwater and saltwater fishing. They’re also simple to tie, which saves time and avoids stress when you’re out on the water. [10]
    • Both the FG and Slim Beauty knots are stronger and slimmer than the Albright, but the Albright is often preferred because it’s easier and quicker to tie.
    • The Albright knot is also relatively smooth and low-profile, which makes it less likely to catch. Each time a knot catches on the guides, it becomes weaker and less secure. [11]
    • Even if your line doesn’t break, a bulky knot that catches on the guide can cause a tangle that you have to fix before you can cast again.
  2. Advertisement
Section 4 of 5:

Alternatives to the Albright Knot

PDF download Download Article
  1. To tie a Nail knot, hold your fly and leader lines along a nail (or a piece of a plastic straw) in your left hand. Make sure the pointy end of the nail is to the right. Pinch the leader to the fly line and nail it with your left hand. Leave a leader tail of 10-12 inches (25.4-30.5 cm) to make the knot. [12]
    • Wrap the tail end of the leader around the fly and leader lines and nail in your left hand.
    • Make 6-8 coils, moving from your left hand toward the pointy end of the nail.
    • Make sure you keep the coils close together without twisting or overlapping.
    • After you make your coils, thread the end of the middle of the knot along the nail. (Or through the straw.)
    • Transfer the knot to your right hand, pinching it with your thumb and finger.
    • Carefully pull the nail (or straw) out to the left, and then pull on the ends of the leader to tighten the knot.
    • Trim excess tails off the fly and leader lines.
    • The Nail knot is less bulky than the Albright knot and a good alternative for tying the leader to the fly line. Some fishermen use the Albright in salt water and the Nail knot in fresh water.
  2. Start a Uni knot by passing about 6-8 inches (15.2-20.3 cm) of the backing line through a line loop, hook eye, or around the spool arbor (or bar in the center of the spool). Cross the line’s tail over to make a loop. Wrap the tail around both sides of the line passing through the reel. Then, coil the tail 6-8 times, passing through the loop with each wrap.
    • Pull the tail to tighten the knot onto the main backing line.
    • Tug on the main backing line to pull the knot snug against the loop, eye, or reel.
    • Pull the tail to re-tighten the knot, and then trim it close to the knot.
    • The Uni knot is a good all-purpose alternative to the Albright knot when attaching two different lines. [13] It’s also a good choice for attaching a hook or tying the backing line to the reel.
  3. Place the 2 lines you want to join together with their ends pointing in opposite directions. Hold the 2 lines together to make a loop for tying a basic overhand knot . Pass the lines through the loop twice to make the knot. [14]
    • Pull all 4 strands to tighten the knot. Trim the ends.
    • Your finished knot looks a little like a figure 8.
    • This reliable knot is easier to tie than the Albright. It’s a good choice for joining 2 pieces of line, especially if they’re both monofilament.
  4. Make a loop 4-5 inches (10.2-12.7 cm) from the end to the larger-diameter line. Pass the end through the loop twice to make a double overhand knot. Gently pull on both ends of the line to pull the knot into a loose figure 8. Fold an 18-20 inch (45.7-50-8 cm) section of the lighter line (or tippet) to create a flat loop. Pass the flat loop through both sides of the Figure 8 double-overhand knot in the heavy line. [15]
    • Pull about 12 inches (30.5 cm) of the flat loop through the knot.
    • Wrap the flat loop around the heavy line 4 times, moving away from the knot.
    • Turn the flat loop and wrap it 3-4 times around the heavy line, moving back toward the knot.
    • Thread the flat loop between the wrap closest to the knot and the heavy line.
    • Pull the heavy line and the doubled lighter line in opposite directions. Don’t pull on the flat loop sticking out of the top of the knot.
    • Trim the hanging end of the heavy line, 1 leg of the doubled lighter line, and all but 1/16 inch (.2 cm) of the flat loop.
    • The Slim Beauty knot is an extremely strong knot that’s an excellent alternative to the Albright knot, even when tying lines of different diameters. The only drawback is that it’s more difficult to tie.
  5. Start by pulling the main line attached to your fishing line taut. Try leaning the rod against a wall so you can keep tension on the line. Wrap the leader line in your right hand under and around the main line. Leave 4-5 inches (10-13 cm) of lead as a tail to make the knot. After you wrap the leader around the main line, you’ll have a cross with the main line vertical and the leader horizontal with an end in each hand. [16]
    • Wrap the leader in your right hand around the main line again, just below the first wrap.
    • Alternate wrapping the leader in your right hand around the main line above and below the wraps until you have made 20-22 total wraps.
    • After every wrap, make sure to pull the leader tight.
    • Pinch the wraps between the thumb and finger of your left hand to prevent it from unraveling.
    • Loop the leader in your right hand over the main line and the other end of the leader.
    • Pull the end of the leader in your left hand through the loop and tighten it 2 times to make 2 hitch knots.
    • Cut off the excess leader line close to the knot. This is the part of the leader in your right hand.
    • Loop the main line around itself and then pull the end through the loop to make a hitch knot. Repeat to make a second hitch knot.
    • Trim the excess main line close to the knot.
    • This knot is strong and has a lower profile than the Albright knot, but it’s significantly more difficult to tie.
  6. Advertisement
Section 5 of 5:

Fishing Knot FAQs

PDF download Download Article
  1. The strongest fishing knot depends on what you’re using it for and how well you tie it. However, you may feel the Fisherman’s knot is one of the strongest and most versatile knots. Another good option is the Uni knot. Not only is it fast and easy to tie, but it’s also almost as strong as the Fisherman’s knot. [17]
    • Another strong knot that can be used to tie your hooks to your fishing line is the Snell knot.
    • The Hay Wire Twist can be a little tricky to tie, but it’s ideal for use with a steel leader.
  2. The best knot for joining 2 lines depends on the diameter, the material the lines are made of, and what they’re used for. It may also depend on what knots the angler likes and is good at tying. [18]
    • Some feel a Palomar knot is the best knot to tying a mono leader to braid.
    • A Blood knot is often mentioned as the strongest knot for tying a fluoro leader to a mono line.
  3. The FG knot is one of the strongest knots for tying braided lines to a stronger monofilament or fluorocarbon leader. However, it requires a strong cinch to lock it in, or it may unravel after you trim the ends. [19]
    • Some feel a J knot is the best for tying a fluoro leader to a braid, so it’s really a matter of preference.
    • Other strong knots for braid-to-fluorocarbon joins are a 4-turn Surgeon’s knot and 5-turn back-to-back Uni knots. [20]
  4. Advertisement

Expert Q&A

Ask a Question
      Advertisement

      Video

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Thanks for submitting a tip for review!

      About This Article

      Thanks to all authors for creating a page that has been read 281 times.

      Did this article help you?

      Advertisement