Download Article
Download Article
Dirt, wear and tear, and exposure to light can cause carpets and rugs to lose color and begin to look dull and dirty. You could buy new ones, but purchasing carpets and rugs can be expensive. The good news is, you don't need to get rid of your favorite floor decor. There are several ways to bring your worn out carpets and rugs back to life without spending a fortune.
Steps
-
Vacuum your carpet or rug. Run a vacuum cleaner over your carpet several times, making sure you don't leave anything behind. Work slowly rather than sweeping the floor in fast strokes. For smaller rugs, you can use a rug beater or even a wooden spoon to knock the dust and debris out.
-
Examine your carpet or rug for dull patches. Sometimes color fades unevenly and you may be able to bring your carpet or rug back to life by identifying and cleaning grimy patches.Advertisement
-
Mix ¼ cup each of salt, white vinegar, and Borax in a bowl to form a paste. The paste should be the consistency of moderately thick oatmeal. [1] X Research source
-
Spread the stain removal mixture over any stains you find. Use a spoon or even a butter knife to spread the mixture. Be sure to cover the entire stain.
-
Allow the mixture to sit for 2 to 3 hours. This ensures the chemicals have time to break apart the stains. Let the mixture dry naturally.
-
Remove the mixture using a cloth and warm water. Use a gentle scrubbing motion in all directions until you've completely removed the mixture. [2] X Research source
-
Dry your carpet or rug thoroughly. Drying time for carpets generally take 5 to 24 hours, depending on how thick the carpet is and what method you use to dry it. To speed up the process, use a fan to dry larger rooms or turn on the heat in your house. Allowing a carpet to dry naturally takes longer. Once your carpet dries, you'll see any stains you've overlooked.
Advertisement
-
Vacuum carpets and rugs to remove dust and debris. Dust and other debris are one of the leading culprits when it comes to making your carpets and rugs look dull. You'll be surprised by the difference you can see in vibrancy simply by using a good vacuum cleaner. Take your time when you vacuum and vary the direction to ensure you get everything up before you continue cleaning.
-
Mix 1 cup of white vinegar and ½ cup of salt with 3 cups of hot water. Dampen a sponge and apply the solution to your carpet or rug. It isn't necessary to soak the sponge.
-
Lay your rug on a flat, solid surface. Carpets are already secured, but rugs can be harder to keep still during the cleaning process. Placing your small and mid-size rugs on a flat, solid surface lets you keep a better grip on the rug as you scrub it.
-
Wipe the vinegar, salt, and hot water solution over your rug with a dampened sponge. Use a steam cleaner to apply the solution to larger areas. [3] X Research source Try to avoid soaking your carpet down to the backing by applying it to the fibers only.
-
Dry your carpet or rug with a fan or allow it to dry naturally. The time it takes to dry a carpet or rug depends on the method you choose and the thickness of the pile. It could be anywhere from half an hour to two hours. If you have thicker carpets or rugs, allow more time for drying, and always check to see if the carpet is dry all the way to the base of the fibers.
-
Look for any spots you missed. Your revived carpet will look great. Any spots you missed will be easy to see, and if need be, you can revisit those areas and repeat the process specifically for those areas you overlooked.
-
Vacuum your carpet one more time. This removes any dirt and debris left behind and helps pull the revived color out.
Advertisement
-
Decide on the type of dye you want to use. There are pre-mixed liquid dyes and powdered dyes available. If you want to be very specific about the shade of color you use, use powdered dye. The powder mixes with water and lets you control the intensity of the color. [4] X Research source
-
Choose your dye application method. You can use a dye machine, spray wand, or airbrush to dye carpets and rugs. These can be rented at many hardware stores. A spray wand or airbrush system works well for small carpets, while a dye machine makes it easier and faster to effectively dye large carpet areas.
-
Remove the furniture from the room where you want to dye the carpet. If you're dying a smaller rug, you can take the rug outside and avoid making a mess in your house.
-
Place painter's tape around the baseboards to avoid getting dye on them. If you don't use tape, be sure to rub mineral oil on the baseboards to make it easier to remove any dye that may splash up during the dye process.
-
Vacuum your carpet or rug thoroughly. This is important because any dirt or debris can cause the dye not to take hold or will cause it to appear uneven.
-
Mix dye according to package instructions. Pre-mixed dye is ready to go, but powdered dye needs to be mixed with water. Use the mixing instructions on the package as a guide, but realize the advantage of powdered dye is your ability to use more or less, depending on the intensity of color you're looking for.
-
Apply dye to your carpet or rug. Take your time and apply the dye slowly and evenly over the carpet or rug. Try to avoid going over any area more than once or you'll have some spots that are darker than others. [5] X Research source
-
Allow your newly dyed carpet or rug to dry for 24 hours. This will ensure your dye has had plenty of time to set.
-
Remove the painter's tape from baseboards. Check for any stray dye that needs to be cleaned, then bring your furniture back into the room.
Advertisement
Expert Q&A
Search
-
QuestionHow do I revive old carpet?Haim Shemesh is a Carpet and Rug Cleaning Specialist and the Owner of Sunlight Fine Rug Care & Restoration, a business based in New York City. Haim specializes in Oriental, Persian, handmade, and antique rug cleaning and repair. He also conducts rug restoration along with fire damage care. He has over 17 years of experience in the carpet cleaning industry. Sunlight Fine Rug Care & Restoration has been awarded Angie's List Super Service Award in 2017 and 2018. Their clients include Staples, Ace Hotel, Momofuku, Banana Republic, and more.Vacuuming your carpet regularly helps preserve it so it lasts for a longer time.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Tips
- Regular vacuuming and cleaning extends the life of your carpets and rugs. [6] X Expert Source Haim Shemesh
Carpet & Rug Cleaning Specialist Expert Interview. 12 May 2020.Thanks - Turn on lights and open windows to maximize lighting while you work.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Warnings
- Not all carpet fibers will hold dye. Wool or nylon is the only type of fiber you can dye.Thanks
- Wipe baseboards with mineral oil to make it easier to remove dye splatter.Thanks
- Dark carpet can't be dyed a lighter shade.Thanks
Advertisement
Things You'll Need
- White vinegar
- Borax
- Water
- Vacuum cleaner
- Cloth
- Salt
- Rug beater
- Painter's tape
- Carpet dye
- Mineral oil
- Carpet shampoo machine
- Carpet dye machine
- Steam cleaner
References
- ↑ https://www.apartmenttherapy.com/how-to-deep-clean-your-carpets-138567
- ↑ http://www.popularmechanics.com/home/interior-projects/how-to/g1414/10-carpet-cleaning-secrets-from-the-pros/
- ↑ http://www.quickanddirtytips.com/house-home/home-repair/5-tricks-for-making-old-carpet-look-new-again
- ↑ https://www.bobvila.com/articles/how-to-dye-carpet/#.WiBRObQ-fVp
- ↑ https://www.bobvila.com/articles/how-to-dye-carpet/#.WiBRObQ-fVp
- ↑ Haim Shemesh. Carpet & Rug Cleaning Specialist. Expert Interview. 12 May 2020.
About This Article
Thanks to all authors for creating a page that has been read 83,982 times.
Reader Success Stories
- "Using vinegar and hot water, and using heated bread crumbs was so new to me. Thank you."
Advertisement