Complete DIY Guide: How to Build an Indoor or Outdoor Stage

PDF download Download Article
Make your perfect performance set-up at home or on the road
PDF download Download Article

Building a stage can provide a great addition to a playroom, or provide an elevated platform for a performance. By combining multiple stage platforms, you can build a stage in any shape or size you desire. Using a few basic tools and some lumber from your local home improvement store, it is possible to create a sturdy stage that will last for years. [1]

Part 1
Part 1 of 3:

Preparing for the Build

PDF download Download Article
  1. Take out the tools that you will use in the construction of your stage. If you don’t own any of the tools you need, ask friends to borrow tools, or you can rent tools from many home improvement stores. https://www.youtube.com/watch?v=68rZiVR_i8c
    • Drill
    • Circular Saw
    • Pliers
    • Socket ratchet wrench
    • Screwdriver
    • Measuring Tape
    • Pencil
  2. To construct your stage you will need to buy wood that will provide the structure of your stage. Look for lumber that is straight and free from knots. Pressure treated lumber is best if your stage will be resting on concrete or placed outside. For each individual platform you will need: [2]
    • 6 – 8 foot 2x4’s
    • 1 – 8’x4’ sheet of 3/4 inch plywood
    • 12 – 3.5 inch hex bolts
    • 24 washers
    • 12 nuts
    • 26 - 1 ½” wood screws
    • 24 - 3” wood screws
    Advertisement
  3. You will need to cut several different lengths of 2x4s to form the supports of your stage platform. To avoid mistakes and wasted wood, remember this rule of carpentry: measure twice, cut once. [3]
    • From two 8’ pieces of 2x4, cut 3 lengths of wood to 3’9” (45 inches).
    • You will have 4’3” of wood left from one 2x4, cut it into two 2’ pieces. (Discard the remaining 3”.)
    • Use a new 8’ 2x4 to cut four 2’ lengths of wood.
    • From the fourth 2x4 cut six 1’ pieces at a 45º angle on each side. Cut the angles on either end toward each other. The long side of the board will measure 12” while the short side accounting for the angles will be approximately 5 ½”. The angled boards will be used to brace the legs.
    • The other two 2x4s will be used to make the frame. Don't cut these.
  4. If you need to build a stage that is bigger than 4’x8’ you will need to create multiple platforms. Cut all of your wood at once to save time in construction.
    5. Advertisement
Part 2
Part 2 of 3:

Constructing the Frame

PDF download Download Article
  1. Lay the 3’9” pieces of 2x4s parallel to each other with approximately 4 feet (1.2 m) between each piece. https://www.youtube.com/watch?v=68rZiVR_i8c Arrange two 8 foot (2.4 m) pieces of 2x4s at the top and bottom of the 3’9” sections to create a frame.
    • The wood should form a rectangle with one 3’9” section separating the rectangle into two squares.
  2. Drill a pilot hole to prevent your wood from splitting. Use two screws at each joint to fasten the pieces of wood together. https://www.youtube.com/watch?v=68rZiVR_i8c
    • Attach two 3’9” pieces of wood between the ends of the two 8’ pieces of wood.
    • The 8’ 2x4 will be on the outside of the 2 shorter pieces.
    • The shorter pieces of 2x4 will be between the 8’ pieces.
    • The measurement from the outside edge to the opposite outside edge is 48”.
    • Place the third 3’9” piece of 2x4 in the middle to support the center of the platform. Center the wood 48” from the end of the 8’ 2x4.
  3. The 2’ sections of wood that were cut will serve as the legs. Hold or clamp the legs in place to drill a guide hole for a bolt. Drill two holes for each leg all the way through the leg and the frame.
    • Place one leg at each corner of the frame.
    • Attach the legs to the 8’ piece of 2x4 not the shorter cross beams.
    • Slide a washer on the 3” bolt and insert it into the holes. Place another washer on the other end of the bolt and fasten it to the wood with a nut.
    • Tighten the bolts using a socket wrench while holding the nut with the pliers.
  4. The 2x4s cut with the 45º angle will act as a brace f or the legs. One side of the angle cut 2x4 will be against the leg, and the other side will be flush with the top of the platform.
    • Drill pilot holes from the angle cut 2x4 into the leg.
    • Drill pilot holes in the side of the angle cut 2x4 into the beam of the stage frame.
    • Fasten the brace to the legs and frame using 3” wood screws.
  5. Turn the platform over on its legs. Place a sheet of plywood on the frame. Attach the plywood to the frame using 1 ½” wood screws.
    • Use a drill with a screwdriver bit to drive the screws into the wood.
    • Place a screw around the perimeter of the wood every 16 inches.
    • Insert two screws in the center of the plywood into the 2x4 cross beam of the frame.
  6. You can arrange multiple 4X8 sections of stage to create a larger stage for your performance.
    7. Advertisement
Part 3
Part 3 of 3:

Finishing the Stage

PDF download Download Article
  1. Sand the edges of your wood and the surface of the plywood with a 200 grit sandpaper. Smooth the edges of the wood and surface of the plywood with the sandpaper. [4]
  2. Prime the wood with an oil based primer to seal the wood. Paint the surface of the stage and frame with black latex paint. Giving your stage a coat of black paint will help protect the wood. [5]
  3. Line up the separate stage sections edge to edge. Arrange four sections to create a stage that measures 8 feet (2.4 m) by 16 feet (4.9 m).
  4. Give your stage a professional finish by covering the bottom of the stage with black fabric.
    5. Advertisement

Community Q&A

Search
Add New Question
  • Question
    What can a stage be used for?
    Community Answer
    Dancing, gymnastics, acting/plays, speeches, or really anything that you want to display to other people.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 6 Helpful 34
  • Question
    Could I add curtains?
    Community Answer
    Yes. Adding curtains would require a bigger budget, as you would have to create a proscenium arch and supports for the curtains.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 2 Helpful 10
  • Question
    I'm having an amateur dance competition. Where can I get a stage or dance floor?
    Community Answer
    You can make one yourself using this guide to help you. It may seem like a daunting task, but you will feel very proud of yourself once you have accomplished the feat!
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 10 Helpful 17
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      • Check to make sure the bolts attaching your legs are secure each time you use the stage.
        Thanks
        Helpful 0 Not Helpful 0
      • Remove the bolts connecting the legs for easy storage. Label the position of each leg prior to removing it.
        Thanks
        Helpful 0 Not Helpful 0
      • You can create a platform without legs by following the same method and not attaching legs.
        Thanks
        Helpful 0 Not Helpful 0
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      You Might Also Like

      How to
      Make a Theater Flat
      How to
      Make a Fake Fire
      How to
      Make a Skit
      How to
      Design a Playbill
      How to
      Write a Musical
      How to
      Design a Stage Set
      How to
      Write a Stage Play
      How to
      Make Puppets
      How to
      Do Stage Lighting
      How to
      Be a Theatre Kid
      How to
      Produce a Play
      How to
      Become a Good Stage Manager
      Advertisement

      References

      1. ↑ https://www.youtube.com/watch?v=68rZiVR_i8c
      2. ↑ https://www.pioneerdrama.com/Newsletter/Articles/Stage_Platform.asp
      3. ↑ https://www.pioneerdrama.com/Newsletter/Articles/Stage_Platform.asp
      4. ↑ https://www.pioneerdrama.com/Newsletter/Articles/Stage_Platform.asp
      5. ↑ https://teachmama.com/an-easy-to-build-stage-for-the-performers-in-your-family/

      About This Article

      Article Summary X

      Once you’ve collected the supplies and gathered the wood, start building your stage by laying 3 3’9” pieces of 2x4 parallel to each other, leaving about 4 feet between each piece. Arrange 2 8 foot pieces of 2x4s on the top and bottom of the frame to complete it, then use wood screws to secure it together. Add 2’ 2x4s to each corner of the frame with bolts to serve as legs. Add a plywood platform and secure it to the frame with 1 ½” wood screws, and voila! For tips on how to cut your wood to the right length, read on!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 298,636 times.

      Reader Success Stories

      • Michael Fields

        Aug 13, 2017

        "Most of the instructions were easy to follow. I did have questions about the angled pieces. I wish there was a ..." more
        Rated this article:
      Share your story

      Did this article help you?

      Advertisement