Download Article
Download Article
To clean your aluminum siding, choose a dry, windless day. Check your siding first for signs of mildew, chalking and needed repairs. Once you’ve determined what cleaning method to use, try to work in the shade as much as possible. Pressure washing is a good technique for ordinary dirt, grime and chalking, while mildew requires washing with a bleach or vinegar solution.
Steps
-
Check for loose or rotting boards. Replace any boards that show signs of rot. Re-nail boards that are loose. Avoid pressure washing until you’ve made these repairs. [1] X Research source
- Pressure washing loose or rotten boards can push water through your siding and soak into walls.
- If your siding needs repairs and you’re not comfortable doing them yourself, contact a siding contractor.
-
Check your siding for mildew. Look for gray, green or black stains. Examine any grooves, and the bottom of the siding. Look especially on the north side of the house and any places that don’t get much sunlight.
- A stronger cleanser is needed to destroy mildew. Even pressure washing won’t prevent mildew from quickly growing back. [2] X Research source
Advertisement -
Look for chalking on painted siding. Put work gloves on. Rub your gloved hand on the surface of the siding. Examine your glove for a light-colored powder. [3] X Research source
- Consider pressure washing if you find signs of chalking, dirt or grime.
Advertisement
-
Get an extendable siding brush. Find a brush that extends about eight to twenty feet. Alternately, attach a car wash brush to an extendable pole made for paint rollers. [4] X Research source
- You can purchase an extendable brush specifically for cleaning siding, or use a long pool broom.
-
Mix cleaning solution in a bucket. Make sure that the head of your brush fits easily into the bucket you choose. [5] X Research source Fill the bucket with hot water and a biodegradable detergent, according to the product’s label.Add 3/4 cup of household bleach or vinegar to each gallon of water, if needed. [6] X Expert Source David Liu
Residential Cleaning Expert Expert Interview. 3 November 2021.- Add bleach or vinegar if your siding shows any signs of mildew.
- Don’t mix bleach with any cleaner that has ammonia in it.
- You can use a cleaner specifically for siding, liquid dish detergent, or a cleaner such as Spic and Span.
-
Test your cleaner on an area of siding. Wear gloves if your solution contains bleach or a harsh cleanser. Wet a clean white rag in your cleaner solution. Rub it on a spot of siding and see whether it is potent enough to do the job.
- You may try up to a few mixtures until you find the right strength to clean your siding.
- Adjust your mixture as needed, adhering to all safety precautions and instructions of the cleaner(s) you chose.
- Use eye protection if the cleaner instructs you to.
-
Protect any plants below the siding, if necessary. Water any shrubs, grass or other plant life near the house first. Spread waterproof tarps or plastic drop cloths over any such plant life. Remove the covers and water the plant life again once you’re finished cleaning and/or power washing your siding. [7] X Research source
- Protect grass or other plants if you’re using bleach or a chemical cleaner.
-
Wet the siding with a garden sprayer, if desired. Fill a garden sprayer with your solution. Spray a portion of the siding about twenty feet wide by the full height of the surface. [8] X Research source Let the solution sit for several minutes before brushing that portion of siding.
- Pre-wetting the siding will cut down on the amount of scrubbing you’ll need to do.
-
Brush the siding. Submerge your brush in the bucket of cleaning solution. Start at the bottom of the siding and work your way up. Scrub the siding sideways, back and forth. Re-dip your brush in the cleanser as needed. [9] X Research source
- Starting at the top can cause permanent streaking.
- The siding below the portion you’re scrubbing should stay wet. Rinse as you work so that the siding won’t dry and have contact with dirty solution that drips down.
Advertisement
-
Choose a pressure washer. [12] X Expert Source David Liu
Residential Cleaning Expert Expert Interview. 3 November 2021. Obtain a washer that produces pressure of at least 2,000 psi (pounds per square inch). Plan to pick it up with a van, SUV or pickup truck if needed. Consider getting help with loading and unloading it from the vehicle. Talk to the rental agent about how to hook up and operate the washer, and ask for all safety precautions. [13] X Research source- You can rent a pressure washer at a local home and building supply store.
- If the washer doesn’t come with nozzles, you’ll have to get them separately. You’ll need fifteen- to twenty-five-degree nozzles.
-
Cover the area. Spread tarp, old sheets, or drop cloths on the ground. Cover any shrubs or plants. [14] X Research source
- If you’re siding is painted, the cloths will protect the ground from paint chips.
-
Protect yourself. Wear protective eyewear, strong footwear, and long pants. Follow all instructions and safety precautions for your brand and model of pressure washer. Read the instructions for a pre-operation check, operating procedures, and shutdown procedures. Don’t pressure wash your siding if it’s painted with paint that may have lead in it. [15] X Research source
- It’s vital to protect yourself properly. The spray of a pressure washer is very powerful and hazardous. The force can cause many types of serious injuries.
- If you’re house was built in 1977 or earlier, or if you’re not sure that it’s lead-free, get the paint tested. Ask your local health department to provide you with safety instructions. [16] X Research source
-
Attach the fifteen degree nozzle. Don’t use settings finer than fifteen degrees. Never use a zero degree nozzle on a pressure washer. [17] X Research source Lock the coupling securely in place. [18] X Trustworthy Source Consumer Reports Nonprofit organization dedicated to consumer advocacy and product testing Go to source
- If the nozzle is not securely attached, it can shoot off when you turn on the pressure washer.
-
Turn on the pressure washer. Attach the washer to a regular garden hose. Attach the garden hose to your outdoor faucet. Start the engine. [19] X Research source
-
Practice using the washer from about two feet away. Move closer as you find the best distance. Spray horizontally or at an angle slightly downward. [20] X Research source
- Proceed with caution when using a pressure washer, which can dent siding or peel off its finish.
-
Scrub the siding or move to a higher pressure, if needed. If a low pressure wash isn’t working well, scrub the siding with a soap solution and follow up with a low pressure rinse. Alternately, do a test wash with a twenty-five degree nozzle in an area of siding that isn’t very visible. Make sure no damage occurs to the siding before continuing a full wash. [21] X Research source
- Proceed with a high pressure wash at the risk that you may damage the test area of siding.
Advertisement
Community Q&A
Search
-
QuestionDo I start at the top and work down, or at the bottom and work up?Community AnswerAlways start at the top and work down, since when you rinse, that is the way the solution will go.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Tips
Submit a Tip
All tip submissions are carefully reviewed before being published
Thanks for submitting a tip for review!
Warnings
- Trisodium phosphate (TSP) is no longer recommended for cleaning projects like siding due to its extreme potency and the danger it poses to people, wildlife and the environment. [22] X Research sourceThanks
Advertisement
Things You'll Need
Choosing Your Cleaning Method
- Boards
- Nails
- Work gloves
Brushing Siding with Cleanser
- Extendable brush
- Bucket
- Hot water
- Detergent
- Bleach or vinegar
- Clean white rag
- Tarps
- Garden sprayer
- Garden hose
Pressure Washing Siding
- Pressure washer ≥ 2,000 psi
- Fifteen-degree nozzle
- Twenty-five degree nozzle
- Outdoor garden faucet
- Garden hose
- Protective eyewear
- Strong footwear
- Long pants
- Tarps
References
- ↑ https://www.familyhandyman.com/painting/how-to-pressure-wash-a-house/view-all
- ↑ https://www.familyhandyman.com/painting/how-to-pressure-wash-a-house/view-all
- ↑ https://www.familyhandyman.com/painting/how-to-pressure-wash-a-house/view-all
- ↑ https://www.youtube.com/watch?v=8SQwYRqeANo&feature=youtu.be&t=20
- ↑ https://www.hometips.com/diy-how-to/house-siding-power-pressure-wash.html
- ↑ David Liu. Residential Cleaning Expert. Expert Interview. 3 November 2021.
- ↑ https://www.weekand.com/home-garden/article/can-power-wash-chemicals-kill-plants-18047562.php
- ↑ https://www.hometips.com/diy-how-to/house-siding-power-pressure-wash.html
- ↑ https://www.youtube.com/watch?v=8SQwYRqeANo&feature=youtu.be&t=58
- ↑ https://www.hometips.com/diy-how-to/house-siding-power-pressure-wash.html
- ↑ https://www.youtube.com/watch?v=8SQwYRqeANo&feature=youtu.be&t=168
- ↑ David Liu. Residential Cleaning Expert. Expert Interview. 3 November 2021.
- ↑ https://www.familyhandyman.com/painting/how-to-pressure-wash-a-house/view-all
- ↑ https://www.familyhandyman.com/painting/how-to-pressure-wash-a-house/view-all
- ↑ https://www.hometips.com/diy-how-to/house-siding-power-pressure-wash.html
- ↑ https://www.familyhandyman.com/painting/how-to-pressure-wash-a-house/view-all
- ↑ https://www.familyhandyman.com/painting/how-to-pressure-wash-a-house/view-all
- ↑ https://www.consumerreports.org/pressure-washers/safety-alert-under-pressure/
- ↑ https://www.familyhandyman.com/painting/how-to-pressure-wash-a-house/view-all
- ↑ https://www.familyhandyman.com/painting/how-to-pressure-wash-a-house/view-all
- ↑ https://www.thisoldhouse.com/ask-toh/cleaning-aluminum-siding
- ↑ https://www.bobvila.com/articles/cleaning-with-tsp-trisodium-phosphate/
About This Article
Article Summary
X
To clean aluminum siding, start by mixing water, liquid dish soap, and white vinegar in a large bucket. Then, submerge a long, extendable scrub brush in the cleaning solution. If you don't have an extendable brush, try attaching a car wash brush to the end of an extendable painting pole. Next, scrub the siding with the solution, starting at the bottom and working your way up to the top. When you're finished, spray the siding with a hose to rinse it off. To learn how to pressure wash siding, scroll down!
Did this summary help you?
Thanks to all authors for creating a page that has been read 75,606 times.
Advertisement
