PDF download Download Article PDF download Download Article

Do you have some tape that you can't get off of your furniture? If so, you can clean tape adhesive to remedy this issue.

Part 1
Part 1 of 2:

Prepping the Adhesive

PDF download Download Article
  1. After a year or so of storage, the tape will not just pull off easily and "preconditioning" with WD-40 will loosen it right up.
  2. If you are careful, it may go faster if you use a single-edged razor blade as a scraper before spraying the adhesive reside with WD-40.
    Advertisement
  3. For the single-edged razor you need to have a blade holder so you have a grip of some kind to ensure that you can control the angle of the blade. That will cost you less than $2 if you have to buy one.
  4. Advertisement
Part 2
Part 2 of 2:

Getting the Adhesive Off

PDF download Download Article
  1. However, it will work if you don't "precondition" the tape with WD-40.
  2. Work with the grain of the wood, rather than working across the grain.
  3. Keep the razor at about a 2 to 4 degree angle to the wood. You don't need to get obsessive and measure the angle; just don't dig into the wood. If the blade starts to carve wood, you will feel the resistance to motion instantly.
  4. It may be very soft and ready to wipe off, or you may need to shoot it with WD-40 again. If you cannot wipe it off with a cloth, shoot it again and wait another 10 minutes.
  5. Use the same method: work with the shallow angle slowly, and with gentle motion.
    • You will be amazed at how easy this is. The WD-40 softens the tape goop and lubricates the blade, so it is less likely to dig into the wood. It is smooth as silk, but it will still leave a very thin layer of tape goop behind.
  6. Wipe the remaining very thin, almost invisible, and with the layer of adhesive off.
  7. Advertisement


Expert Q&A

Ask a Question
      Advertisement

      Tips

      • Use the DARK finish variety of Old English, and every home should have a bottle of it, along with a case of WD-40. That stuff has more uses that duct tape.
      • Some recommend nail-polish remover. That is usually Acetone, and it will almost definitely remove the finish from your wood. It may or may not attack the adhesive. It is a very "hot", volatile and combustible solvent, so you shouldn't mess with it.
      • Try both sides of the razor blade scraper. One will usually work more smoothly than the other.
      Show More Tips
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Thanks for submitting a tip for review!
      Advertisement

      Things You'll Need

      • A can of WD-40
      • A single-edge razor with a holder
      • A soft cloth
      • Some furniture polish

      Expert Interview

      Thanks for reading our article! If you’d like to learn more about cleaning tape adhesive from wooden furniture, check out our in-depth interview with Raymond Chiu .

      About This Article

      Thanks to all authors for creating a page that has been read 97,236 times.

      Reader Success Stories

      • Peggy Wilson

        May 27, 2020

        "I didn't know where to start! This article is outstanding. It worked for large amounts of duct tape residue I ..." more
      Share your story

      Did this article help you?

      Advertisement