PDF download Download Article PDF download Download Article

Potholders are a perfect project if you're new to crocheting or just want to use up some of your yarn. As long as you can make a chain and single crochet, you should be able to create a thick square that protects you from hot pots and pans. This double-thick potholder is worked around instead of back and forth so both layers form as you crochet. It's sometimes called a folded or magic potholder because it works up so quickly!

Part 1
Part 1 of 3:

Making a Foundation Chain

PDF download Download Article
  1. You'll need a 4-ounce (113 g) skein of worsted weight yarn or #4 yarn like afghan or aran yarn. Look for yarn made from all cotton since acrylic yarn can melt if you set a hot pan on it. [1]
    • Pick a solid yarn or get multi-colored yarn for a vibrant potholder.
  2. Watermark wikiHow to Crochet a Potholder
    Pull a length of yarn and twist the end into a loop. Slide your thumb and forefinger into the loop and use them to grab the yarn tail. Hold the working yarn with your other hand so you can pull the tail through the loop near its center or near the loop-side of the tail. Gently pull the working yarn to close the loop around the tail as you pull it through to make another loop. [2]
    • If you're new to making slip knots , practice a few times. To tell if you've correctly made a slip knot, keep pulling the yarn in opposite directions. The knot should come undone instead of tightening.
    Advertisement
  3. Watermark wikiHow to Crochet a Potholder
    Slip the knot onto the crochet hook and pull the yarn until it's snug around the hook. Don't pull too tightly or you'll have a hard time making your foundation chain. [3]
  4. Watermark wikiHow to Crochet a Potholder
    Take the working yarn that's attached to the skein and wrap it once around your crochet hook. Bring the hook through the loop to make 1 chain. Then, repeat this to make a total of 35 chain stitches, which should be around 10 inches (25 cm) long. [4]
    • This makes the foundation or bottom edge for your potholder.
    • Although gauge doesn't matter very much for this project, you may want to crochet tighter if your chain is longer than 10 inches (25 cm) or make looser stitches if your chain is too short.
    EXPERT TIP

    Sarah Stearns

    Crochet Expert
    Sarah Stearns is a DIY Specialist, Artist, Maker, Blogger, and the Founder of SarahMaker.com. With over ten years of experience, she specializes in fun, approachable crafts like crocheting, making polymer clay jewelry, quilting, and creating Cricut projects. Her work has been featured in several publications, such as Scientific American, Good Housekeeping, Vox, and Apartment Therapy. Sarah holds a BA in Psychology from Vanderbilt University.
    Sarah Stearns
    Crochet Expert

    Find the right crochet projects for beginners. Start with small crochet projects like potholders or scarves that are stitched in easy, flat rows. Once you feel comfortable working in flat rows, you can move on to crocheting in the round by tackling fun projects like granny squares for a blanket or a basic beanie hat.

  5. Advertisement
Part 2
Part 2 of 3:

Single-Crocheting the Potholder

PDF download Download Article
  1. Watermark wikiHow to Crochet a Potholder
    Insert your hook into the chain stitch that's closest to the hook and wrap the yarn around it once. Bring the hook back through the chain so you have 2 loops on the hook. Wrap the yarn around the hook 1 more time and pull your hook through the 2 loops to create 1 single crochet stitch. [5]
    • The single crochet stitch is one of the fastest crochet stitches to work, so this potholder comes together quickly.
  2. Watermark wikiHow to Crochet a Potholder
    Keep making a single crochet stitch into each chain. Stop crocheting when there's just 1 chain left on the foundation. [6]
    • This means you'll make a total of 34 SC stitches on this side of the foundation chain.
  3. Watermark wikiHow to Crochet a Potholder
    Once you're at the last chain on the foundation, make a SC stitch. Then, insert your hook into the same chain stitch and make another SC stitch into it. This makes a slight curve that forms the corner of your potholder. [7]
  4. Watermark wikiHow to Crochet a Potholder
    Now that you've curved the end of your foundation, you can crochet into the back loops of the chain. Make a SC stitch into the back of each stitch until you reach the other end of the row. You'll make 35 SC stitches along the back of the foundation chain. This completes the first full row of SC. [8]
    • It's really important that you don't join the rows and turn the work. Instead, remember to SC into the back loops.
  5. Watermark wikiHow to Crochet a Potholder
    You don't need to make extra SC stitches in the corners since you've already established them. Just remember to keep making SC stitches into the stitches of the SC row immediately before it, rather than into the chain stitches. Depending on your tension, you'll need to knit around 40 rows of SC with 71 stitches each. When your potholder is at least 8 inches (20 cm) square, work to the end of the last row you'd like to complete. [9]
    • This makes 2 layers of fabric, which form the double-thick potholder.
  6. Advertisement
Part 3
Part 3 of 3:

Finishing Your Potholder

PDF download Download Article
  1. Watermark wikiHow to Crochet a Potholder
    When you reach the corner and your potholder is as big as you like, make 7 chain stitches. This makes a short length of fabric that you'll use to make a loop for hanging up your potholder when you're not using it. [10]
  2. Watermark wikiHow to Crochet a Potholder
    Keep the last loop of your chain on your hook and push your hook into the corner of your potholder. To join the loop to the potholder, grab the working yarn with your hook. Pull it through the loop and then pull it through the stitch on your hook. [11]
    • If you don't want your potholder to have a hanging loop, just skip these steps and tie off your working yarn.
  3. Watermark wikiHow to Crochet a Potholder
    Leave a long yarn tail that you can use to sew the top of the potholder closed. Before you sew it closed, however, bring the yarn through your last stitch and make a knot. [12]
    • If you forget to leave a long yarn tail, just tie a 2 ft (24 in) length of yarn to the end of your yarn tail and use it to sew the potholder shut.
  4. Watermark wikiHow to Crochet a Potholder
    Insert the needle through the stitch that's closest to the hanging loop and push it through the opposite stitch on the other edge of the potholder. Pull the yarn and insert the needle through the next stitch. Continue to whipstitch until you reach the end. Then, tie off the yarn and use your hook to pull the tail into the center of the potholder. [13]
    • If you feel more comfortable making the slip stitch, use a tapestry needle to slip stitch between the stitches on the edges of the potholder to join them.
  5. Advertisement

Expert Q&A

Ask a Question
      Advertisement

      Tips

      • Creating a potholder is great crocheting practice and they make great gifts!
      • It's really important to sew a double-thick potholder instead of a single-layer one since the extra layer protects you from getting burned.
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Thanks for submitting a tip for review!
      Advertisement

      Things You'll Need

      • 4-ounce (113 g) skein of worsted weight yarn
      • Size US G (5 mm) crochet hook
      • Scissors
      • Tapestry or darning needle

      Expert Interview

      Thanks for reading our article! If you’d like to learn more about knitting and crochet, check out our in-depth interview with Sarah Stearns .

      About This Article

      Thanks to all authors for creating a page that has been read 33,962 times.

      Did this article help you?

      Advertisement