How to Cut Locks

Co-authored by Shawn Fago and Hunter Rising

Last Updated: April 29, 2024 Fact Checked

If you've misplaced your key or forgotten the combination to a lock, you may need to cut through the lock in order to remove it. Luckily, with a few supplies from your local hardware store, you can break through the lock to access what you need. By either using bolt cutters, an angle grinder, or a hacksaw, you’ll be able to open most steel locks.

Method 1

Method 1 of 3:

Cutting the Lock with Bolt Cutters

Download Article

1
Use a pair of bolt cutters at least 24 in (61 cm) long. Visit your local hardware store to see their selection of bolt cutters. Aim to get cutters 24 inches (61 cm) long or larger since they will give you the most leverage as you try to cut through the lock.
- Larger pairs of bolt cutters can cut through locks with a larger diameter.
2
Put the lock’s shackle between the blades of the bolt cutters. Tilt the lock to the side so you can easily cut the side of the shackle, or the metal clasp that holds the lock together. Hold the bolt cutters in a comfortable position near your waist. Pull the handles apart so the blades open. Place the bolt cutters on one side of the shackle close to the body of the lock.
- If the lock isn’t attached to anything, secure it in locking pliers or a vise so it doesn’t move around when you try cutting it. Spin the handle on the vise to close it around the lock.
Advertisement
3
Squeeze the grips together to close the cutters. Hold the grips on your cutters and apply firm pressure to break through the lock. Squeeze the handles together until it cuts through the shackle. ^{[1]
X
Research source}
- If you can’t cut through the lock yourself, ask a friend to help you close the bolt cutters.
- If the lock is made of hardened steel, bolt cutters may not work.
- Bolt cutters work best on padlocks or chained bike locks.

Method 2

Method 2 of 3:

Grinding the Lock

Download Article

1
Buy an angle grinder with a cut-off blade from your local hardware store. An angle grinder is a portable machine that uses a disc to cut metal and tile. Use a 60 grit disc that’s ³ ⁄ ₆₄ inch (1.2 mm) thick for the easiest way to cut through the lock’s shackle. ^{[2]
X
Research source}
- Angle grinders work best on padlocks or bike locks.
- If you’re working at home, use an angle grinder that plugs into the wall. If you need to work somewhere without electricity or an outlet, buy a battery-powered grinder.
2
Wear gloves and a face shield to protect yourself from sparks. Get a safety shield that covers your entire face and use thick gloves meant for shop work. Wear a long-sleeved shirt and pants if you can for added protection. ^{[3]
X
Research source}
- Make sure there are no flammable objects near you or in the room since a spark could ignite them. Keep a fire extinguisher nearby just in case.
3
Hold the bottom of the lock secure with vise-grips. Vise-grips are locking pliers that clamp onto an object. Open the vise-grips to the same width as the lock you’re trying to cut. Turn the spindle on the end of the vise-grips’ handle to lock it in place so the lock doesn’t move around. ^{[4]
X
Research source} Use your non-dominant hand to tilt the lock to the side and hold it steady. ^{[5]
X
Research source}
- Vise-grips can be purchased at your local hardware store.
- If you’re working in a shop, clamp the lock inside of a vise instead.
4
Cut through the top of the lock’s shackle using your angle grinder. Turn on the angle grinder and slowly press the disc onto the shackle. As you cut through the lock, the grinder will shoot off sparks. Keep firm pressure on the grinder so it works through the shackle. Once you finish your cut, turn off the grinder and remove the lock. ^{[6]
X
Research source}
- The lock may be hot near the area you cut. Use gloves to handle it or let it cool down first.

Method 3

Method 3 of 3:

Using Heat and a Hacksaw

Download Article

1
Keep the lock sturdy with vise-grips. Grip the bottom of the lock with a pair of vise-grips. Tighten the nut on the handle to ensure the lock doesn’t move around while you’re holding it. Tilt the lock away from the object it’s attached to. ^{[7]
X
Research source}
- Don’t use your bare hands to hold the lock since you could burn yourself.
2
Hold a lit propane torch to the shackle for about 3 minutes. Pick any location on the shackle to heat. Light the torch with a striker and turn the valve on the nozzle to make the flames into a tight cone. Hold the tip of the flame against the shackle until it turns red hot. ^{[8]
X
Research source}
- Find an area on the shackle that you can easily maneuver a saw around.
- Work in a well-ventilated area away from flammable materials.
- Keep a fire extinguisher nearby in case there’s an accident.
After the lock is red hot, turn off the propane torch and let the shackle cool. Don’t dip the lock in water to cool it down, since this could strengthen the steel again. ^{[9]
X
Research source}
4
Saw through the area you heated. Use a fine-toothed hacksaw meant for cutting through metal. Hold the lock in place with vise-grips in your non-dominant hand, and pull the back and forth across the area you heated with your dominant hand. Apply firm pressure to the lock to cut through it completely. ^{[10]
X
Research source}
- The heat softens the metal and helps the saw teeth stay in place as you try to cut the lock.
- Hacksaws work best on metal locks.

Community Q&A

Search

Add New Question

Question

My lock is a lock that says it can't be cut off. I lost the key, so how can I get it off?

R2_d2000

Top Answerer

Your lock most likely can be cut off, it will just take a little longer. You can try the steps in the article, and if you have trouble, then you can contact a locksmith to remove the lock for you.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 6 Helpful 8
Question

What tool is used to cut locks?

Drew Hawkins1

Community Answer

There are a few different tools you can use to cut off a lock. Bolt cutters are the most common. Simply clip off the lock's shackle to remove it. You could also use an angle grinder and cut through the shackle, but you'll need to secure it with vice grips and wear face protection to protect against flying sparks. Another option is to heat the shackle with a propane torch for about 3 minutes and then saw through it with a hacksaw.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 9 Helpful 3
Question

Can bolt cutters cut a lock?

Drew Hawkins1

Community Answer

Yes, bolt cutters are an effective tool you can use to cut off a lock. Choose a pair of long-handled bolt cutters and place the shackle between the blades. Squeeze the grips of the bolt cutters together until they cut through the shackle. Then, simply remove the lock. However, if the lock is made of galvanized or hardened steel, the bolt cutters may not be able to penetrate the shackle.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 7 Helpful 7

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Video

Tips

Call a locksmith if you don’t want to permanently damage the lock.

Thanks
Helpful 0 Not Helpful 0

Submit a Tip

All tip submissions are carefully reviewed before being published

Name

Please provide your name and last initial

Submit

Thanks for submitting a tip for review!

Warnings

Work in an area without flammable materials while using an angle grinder. Always keep a fire extinguisher nearby in case of an accident.

Thanks
Helpful 4 Not Helpful 2
Only cut locks that belong to you.

Thanks
Helpful 9 Not Helpful 11
Wear a face mask and gloves when working with an angle grinder or propane torch to protect yourself from sparks.

Thanks
Helpful 4 Not Helpful 3
Once a lock is cut, it’s permanently damaged. Make sure to replace it and keep the combination or key in a safe place.

Thanks
Helpful 4 Not Helpful 4

Things You’ll Need

Cutting the Lock with Bolt Cutters

Bolt cutters

Grinding the Lock

Work gloves
Face shield
Angle grinder
Vise-grips

Using Heat and a Hacksaw

Propane torch
Protective glasses
Vise-grips
Hacksaw

[1]

[2]

[3]

[4]

[5]

[6]

[7]

[8]

[9]

[10]

Log in

How to Cut Locks

Steps

Cutting the Lock with Bolt Cutters

Grinding the Lock

Using Heat and a Hacksaw

Community Q&A

Video

Tips

Warnings

Things You’ll Need

Cutting the Lock with Bolt Cutters

Grinding the Lock

Using Heat and a Hacksaw

You Might Also Like

References

About This Article

Did this article help you?

Quizzes

You Might Also Like

Featured Articles

Trending Articles

Featured Articles

Featured Articles

Watch Articles

Trending Articles

Quizzes

Explore Categories