How to Drive a Manual Transmission Vehicle Without Using the Clutch

Last Updated: December 28, 2023

In most manual transmission vehicles it is possible to shift gears without use of the clutch. This is done by matching the engine output RPM with the rotational speed of the vehicle's transmission output. Please note that this can only be done when the vehicle is in motion, the clutch must be used when starting from a dead stop.

Method 1

Method 1 of 2:

To Upshift

Download Article

This will relieve the tension in the transmission. Immediately afterwards, pull the shift lever out of gear. ^{[1]
X
Research source}
(NOTE: The amount of pressure required can vary: Too much pressure and the gear can slip in prematurely, resulting in gear grinding. Too little pressure and the gear won't slip in all the way, resulting in gear grinding). ^{[2]
X
Research source}

Advertisement
Once the engine RPMs have dropped to match the rotational speed of the transmission output, the shift lever should slip into gear. ^{[3]
X
Research source}

Method 2

Method 2 of 2:

To Downshift

Download Article

When the car is in motion and when the current gear is too low to maintain proper power, take your foot off the accelerator and then pull the shift lever out of gear. ^{[4]
X
Research source}
^{[5]
X
Research source}
3
While the engine RPMs are dropping, push (or pull) the shift lever in the direction of the desired gear, applying light pressure against the desired gear.
- Once the engine RPMs have matched the rotational speed of the transmission output, the shift lever should slip into gear. ^{[6]
  X
  Research source}

Community Q&A

Search

Add New Question

Question

Will this technique damage my cars transmission?

Community Answer

Yes, it can damage your transmission if you do not do it properly.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 2 Helpful 17
Question

When do I need to use the fifth gear?

Community Answer

On the highway, your highest gear is optimal. When merging onto another highway, downshifting is a good idea so that you can accelerate faster with the higher RPM.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 0 Helpful 9
Question

Will this damage my transmission?

Community Answer

Not if you match the RPMs correctly. If the gears grind then you should just continue with the clutch.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 3 Helpful 8

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Tips

Pay attention to engine RPMs, note where specific gears fall in to position (note that this varies with speed). This will help you to more efficiently shift without use of the clutch.

Thanks
Helpful 0 Not Helpful 1

Submit a Tip

All tip submissions are carefully reviewed before being published

Submit

Thanks for submitting a tip for review!

Warnings

This can ONLY be done when the vehicle is already in motion. Starting a manual transmission vehicle from a dead stop requires the use of the clutch.

Thanks
Helpful 27 Not Helpful 14
Please note that not all transmissions are "smooth" enough to be shifted without use of the clutch, repeated attempts to do so may damage the transmission if gear grinding is excessive. Some heavier duty transmissions tend to grind gears much more easily and are more difficult to shift without use of the clutch. This is most easily attempted on light duty transmissions such as those in compact/mid-sized cars/SUVs/trucks.

Thanks
Helpful 18 Not Helpful 9
When downshifting without the clutch, make sure that you let the engine RPMs start to fall before applying pressure against the gear. If you apply pressure beforehand, the gear may attempt to slip in prematurely, resulting in gear grinding.

Thanks
Helpful 28 Not Helpful 17

You Might Also Like

[1]

[2]

[3]

[4]

[5]

[6]

Log in

How to Drive a Manual Transmission Vehicle Without Using the Clutch

Steps

To Upshift

To Downshift

Community Q&A

Tips

Warnings

You Might Also Like

References

About This Article

Did this article help you?

About This Article

Quizzes

You Might Also Like

Featured Articles

Trending Articles

Featured Articles

Featured Articles

Watch Articles

Trending Articles

Explore Categories