How to Find Wall Thickness of a Pipe

PDF download Download Article
PDF download Download Article

A pipe’s wall thickness is typically used to determine its strength, or how much pressure it can handle. You can find the wall thickness of a pipe by measuring an open pipe’s inner and outer diameters manually, or you can use a special tool called an ultrasonic thickness gauge to automatically get a wall thickness measurement for any pipe, even if it’s already installed. Whichever method you choose, measuring a pipe's wall thickness should only take a couple of minutes!

Method 1
Method 1 of 2:

Using the Inside and Outside Diameters

PDF download Download Article
  1. Place your chosen measuring tool across the center of the pipe’s inside opening. Read the distance between the inside edge of one wall to the inside edge of the opposite wall to get the inside diameter. [1]
    • Make sure your ruler or tape measure is passing through the exact middle of the pipe, so that the inside edges of the wall are exactly opposite from each other.
    • In other words, you are measuring the furthest distance across the hollow inside of the pipe.
    • Measure using centimeters and millimeters to get the most precise measurement. Pipe wall thicknesses are usually measured using the metric system. You can use inches if you prefer.
  2. Put your ruler or tape measure across the middle of the pipe’s opening. Read the distance between the outside edge of one wall to the outside edge of the opposite wall to find the outside diameter. [2]
    • In this step you’re measuring the furthest distance across the pipe’s opening, but from the outside of the walls instead of inside the walls.
    Advertisement
  3. Subtract the first number you got, or the smaller number, from the second number you got, or the bigger number. The difference between them is the thickness of the opposite walls combined. [3]
    • For example, if the outer diameter is 2 in (5.1 cm) and the inner diameter is 1.8 in (4.6 cm), subtract 1.8 in (4.6 cm) from 2 in (5.1 cm) to get 0.2 in (0.51 cm).
    • You can do this calculation in your head or by using a calculator.
  4. Take the number you got by subtracting the inner diameter from the outer diameter and divide it by 2 to cut it in half. The number you are left with is the pipe’s wall thickness. [4]
    • For example, if you got 0.2 in (0.51 cm) by subtracting the inner diameter from the outer diameter, divide 0.2 in (0.51 cm) by 2 to get a pipe wall thickness of 0.1 in (0.25 cm).
    5. Advertisement
Method 2
Method 2 of 2:

Operating an Ultrasonic Thickness Gauge

PDF download Download Article
  1. Press and hold the power button. Release the power button when you see digits appear on the gauge’s display. [5]
    • An ultrasonic thickness gauge bounces high-frequency soundwaves through a surface to calculate the thickness of a material.
    • You can purchase one of these gauges online for under $100 USD.
    • Most ultrasonic thickness gauges work pretty much the same way, so you can apply this method to any make or model.
  2. Press and hold the button until the screen displays CAL. This begins the gauge’s automatic calibration process. [6]
    • Most thickness gauges have a CAL button, but some might have an image of an old-fashioned balance instead.
    • You can always refer to your gauge’s owner’s manual if your machine looks different and you aren’t sure how to calibrate it.
  3. Open up a bottle of ultrasonic thickness gauge couplant gel and squeeze a generous dollop out onto the gauge’s sensor head. This gel facilitates the transmission of sound waves between the machine and the material you are measuring. [7]
    • The gauge’s sensor head is the round head attached to the machine’s cable. It looks kind of like a medical stethoscope.
    • You can thickness gauge couplant gel, sometimes called coupling gel or transmission gel, online for about $15 USD or less.
  4. Press the sensor head flat against the calibration chip and hold it there steadily. Wait until the numbers on the machine’s screen stop changing. [8]
    • Every ultrasonic thickness gauge comes with a calibration chip that weighs a certain amount. The machine knows this number and will automatically calibrate itself to read the correct weight.
  5. Add another dime-sized dollop of couplant gel to the sensor head. Place the sensor against the outside wall of a pipe and hold it there until the numbers on the screen stop changing. The number the screen settles on is the wall thickness of the pipe in centimeters. [9]
    • For example, if the numbers on the screen stop changing at 0.7, the pipe’s wall thickness is 0.7 cm (0.28 in).
    • Pipe wall thickness is usually measured using the metric system. In other words, centimeters and millimeters. However, thickness gauges also have an option to measure in inches.
    6. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    How do I cut a copper pipe if I don't have a pipe cutter?
    Greg Jeiranyan
    Licensed Plumber
    Greg Jeiranyan is a Licensed Plumber based in Los Angeles, California. With over 10 years of professional experience, Greg and his team specialize in residential and commercial plumbing service calls. His company, Plumbing Geeks, is rated 5 stars on Yelp and is a family-owned and operated plumbing company. Plumbing Geeks has been serving Los Angeles and its surrounding areas since 2021.
    Greg Jeiranyan
    Licensed Plumber
    Expert Answer
    You can use a multi-tool if you don't have a copper cutter. With the multi-tool, you'll be able to use it as a blade that does multi-material work. Cut it flush and clean it up with a towel or rag. Then, get a reamer and some sandpaper and clean up the pipe so you can put a fitting on it. You can also use a hacksaw if you don't have a multi-tool.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 0
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      • Ultrasonic thickness gauges can typically find the wall thickness of pipes within a range of 0.12–22 cm (0.047–8.661 in) or so.
        Thanks
        Helpful 0 Not Helpful 0
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • Always calibrate an ultrasonic thickness gauge before you use it or you can end up with inaccurate wall thickness measurements.
        Thanks
        Helpful 0 Not Helpful 0
      Advertisement

      Things You’ll Need

      Using the Inside and Outside Diameters

      • Ruler or tape measure
      • Calculator (optional)

      Operating an Ultrasonic Thickness Gauge

      • Ultrasonic thickness gauge
      • Couplant gel
      • Calibration chip

      You Might Also Like

      How to
      Measure Pipe Size
      How to
      Fix a Leaky Sink Drain Pipe
      8 Easy Ways to Repair a Leaky Pipe
      How to
      Bend a 3‐Point Saddle
      How to
      Hide Pipes
      How to
      Clean a P‐Trap or U‐Bend
      How to
      Thaw a Frozen Pipe
      How to
      Easily Patch and Repair PVC Pipe
      How to
      Thread Pipe
      Easiest and Fastest Ways to Cut Copper Pipe to the Right Length
      How to
      Fix a Broken Pipe
      How to
      Keep Outside Pipes from Freezing
      How to
      Wrap Pipes for Cold Weather
      How to
      Bend PVC Pipe (With and Without Special Tools)
      Advertisement

      Expert Interview

      Thanks for reading our article! If you’d like to learn more about plumbing, check out our in-depth interview with Greg Jeiranyan .

      References

      1. ↑ https://sciencing.com/calculate-internal-diameter-7919156.html
      2. ↑ https://www.youtube.com/watch?v=-JRsQ1K1sEU&feature=youtu.be&t=20
      3. ↑ https://www.youtube.com/watch?v=MugURwTT8ic&feature=youtu.be&t=15
      4. ↑ https://www.youtube.com/watch?v=MugURwTT8ic&feature=youtu.be&t=20
      5. ↑ https://www.youtube.com/watch?v=ay0zC9HLSqc&feature=youtu.be&t=11
      6. ↑ https://www.youtube.com/watch?v=KCb4uKmJBBQ&feature=youtu.be&t=80
      7. ↑ https://www.youtube.com/watch?v=KCb4uKmJBBQ&feature=youtu.be&t=94
      8. ↑ https://www.youtube.com/watch?v=KCb4uKmJBBQ&feature=youtu.be&t=106
      9. ↑ https://www.youtube.com/watch?v=38W5RVqK9ZA&feature=youtu.be&t=44

      About This Article

      Thanks to all authors for creating a page that has been read 24,343 times.

      Did this article help you?

      Advertisement