Quick and Easy Ways to Repair a Blown Fuse

Download Article

Get your home and car running with these simple tips

Co-authored by James Hornof and Mason Martinez, BA

Last Updated: November 28, 2023 Fact Checked

Download Article

Home Fuse

|

Car Fuse

Fuses are electrical safety devices that offer overcurrent protection to your home or vehicle’s wiring. Without them, you’re risking potential wire damage—or worse, fire hazards. Whether you’re temporarily trapped in the dark after plugging in one too many appliances, or you’re without a radio on a long drive, fortunately, fuses are a simple, quick, affordable fix. So, grab some insulated gloves and a trusted pair of tweezers and follow this guide to get started!

Things You Should Know

To replace a blown fuse in your home, cut power off from your circuit breaker and unscrew the broken fuse. Then, screw a new fuse of the same amperage into the socket.
To replace a blown fuse in your car, disconnect the battery and remove the blown fuse. Then, take a new one of the same amperage and push it gently back into place.

Get Car Support Solve Any Problem

Hi there! Do you have a question about how to diagnose or fix a problem with your car? I’ve read the manual so you don’t have to. Select your make, model, and year, then ask away!

*

Method 1

Method 1 of 2:

How to Fix a Blown Fuse in Your Home

Download Article

Your home’s circuit breaker, or service panel, is easily identifiable. Look for a gray steel box with a hinged door. It will either be placed directly into your wall or secured to it. They’re typically located in the basement, however, for homes without one, you can find it in your utility room or garage. ^{[1]
X
Research source}
2
Before engaging in any electrical work, first unplug any appliances and shut the power off. This is so you don’t accidentally touch exposed wires or other components that can shock or electrocute you. To avoid injury, use extreme caution. ^{[2]
X
Research source}
- For modern homes, switch the circuit breaker in the main service panel to the “off” position. ^{[3]
  X
  Research source}
- Homes built before 1960 will operate on a fuse panel. To cut power off from the entire house or individual circuits, pull the small metal handle connected to the main or individual fuse blocks. ^{[4]
  X
  Research source}
Advertisement
While you don’t need to dress head-to-toe in protective gear, it’s always better to be safe than sorry. It only takes 500 volts to cause serious damage to your body. ^{[5]
X
Research source} At minimal, put on a pair of electric insulated gloves to keep your fingers safe from unexpected shock or burns.
Every circuit breaker panel comes with steel stamped numbers and a paper glued to the back of the panel door. This helps you match individual breakers to specific circuits. For example, if you’ve blown an outlet in the bathroom, you’ll need to find the “Bathroom outlets” breaker. ^{[6]
X
Research source} Once you’ve narrowed down your search, look for a fuse with discoloration, cracks, or scorches.
5
Unscrew the fuse by twisting it out of its socket, touching only its face. You can also use a fuse puller if you’re experiencing difficulty. Remove it completely from its socket, making sure to avoid touching the metal threaded base of the fuse. ^{[7]
X
Research source} Replace the damaged fuse with a replacement fuse of the same amperage.
- Each fuse or circuit breaker should have its amperage marked on the handle.
- In the United States, most homes are wired with 15-amp or 20-amp fuses. ^{[8]
  X
  Research source}
- On average, an individual fuse can run you between $3 to $15. ^{[9]
  X
  Research source}
Flip the breaker you’ve just replaced back to the “on” position. Return to where you originally lost power and turn on a light fixture or appliance to make sure the circuit has power. ^{[10]
X
Research source} If you follow all these steps, your power should be back on track!
If you find that power is not resuming or the circuit trips shortly after being restored, it’s time for a helping hand. A professional fuse replacement service can run anywhere between $400 to $2,000 in the United States. ^{[11]
X
Research source}

Method 2

Method 2 of 2:

How to Fix a Blown Fuse in Your Car

Download Article

1
Safety always comes first. To avoid potential mishap or injury, keep your vehicle powered off. Then, raise your vehicle’s hood and locate its battery. If you’re struggling to find it, refer to your owner’s manual for its exact location.
- To disconnect your car battery, first locate the positive (+) and negative (-) terminals on either side of the battery. In some cases, the terminals may be covered with a plastic cap. Simply remove these with your fingers. ^{[12]
  X
  Research source}
- Grab a 10-millimeter open-end wrench or socket wrench to unbolt the battery cables. ^{[13]
  X
  Research source}
- Begin by unbolting the negative battery cable. Once it’s loose, you’ll be able to disconnect the cable by lifting it free. Push the cable far out of the way before proceeding to unbolt the positive cable next. ^{[14]
  X
  Research source}
2
In most vehicles, there will be two fuse panels. One located on the driver’s side of the dashboard, beneath the steering wheel or one under the front hood. ^{[15]
X
Research source} Refer to your vehicle’s owner’s manual to be sure. Once you know where the fuse panel is, remove its cover to find several rows of color-coded fuses.
- The backside of the cover will show a diagram of which fuse belongs to specific electrical components. For example, one fuse will be assigned to your dashboard lights. ^{[16]
  X
  Research source}
- If you do not have an owner’s manual, contact your local dealership or search online for more information.
If you suspect a fuse is blown in your car, it’s likely you’re experiencing a malfunction like your radio or power outlets won’t work. Refer to the backside cover of your fuse panel and look for the correct color-coded or numbered fuse. For example, for a faulty radio you’ll look for the fuse that’s assigned to the radio. ^{[17]
X
Research source}
Most vehicles already come with a small fuse puller for safe removal. However, if you do not have one carefully remove the fuse with your fingers, pliers, or a screwdriver. Use the tool to grip the fuse firmly and pull straight out. ^{[18]
X
Research source}
Take a light to the fuse in question and look for a metal wire inside. If you notice a small split in the wire, that means the fuse has blown. ^{[19]
X
Research source}
Each color-coded fuse has an amperage rating written on it. You must use a replacement fuse that has the same amperage. Otherwise, it’s likely it will blow again. When you have the right fuse, gently push it into the correct slot and put the panel cover back in place. ^{[20]
X
Research source}
Once you’re done replacing the fuse, it’s safe to reconnect the positive (+) and negative (-) cables. ^{[21]
X
Research source} With everything back in place, turn the ignition. If it’s working, you just had a temporary power surge that blew the fuse.
Also, see a mechanic if the fuse blows again. Expect to pay anywhere from $88-$111 for a diagnosis. An electrical repair can run anywhere between $1,300-$2,000. However, prices will vary depending on the make, model, and year of your vehicle. ^{[22]
X
Research source}