Download Article
Download Article
Screening is a general term that refers to fences that don’t completely cover a yard or garden. Since bamboo is too weak to stand on its own without support beams, bamboo screening requires a fence or wall behind it to support its weight. You can install bamboo screening against any wood, concrete, or chain link structure in your yard or garden. Since bamboo screening comes in preassembled rolls, it’s typically pretty easy to install as well. Use bamboo screening to cover up a visually unappealing fence, add an accent wall to your garden, or create a more naturalistic look in your backyard.
Things You Should Know
- Measure the length and height of the area you want to cover.
- Install support beams first if you're attaching screening to masonry.
- Unroll the bamboo screening and spread it across the area you want to cover.
- Drill screws through the screening along the top and bottom edges to attach it.
Steps
-
Measure the length of the fence that you are going to cover. You can attach bamboo screening to wood fencing, chain link fencing, or concrete. Take a look at your yard and determine where you want to install your screening. Use a measuring tape to calculate the length of the area you want to cover. Jot these numbers down to reference them when ordering your bamboo.
- You don’t need to cover your entire yard. Many people install screening along one section of their fencing to create an accent wall or cover up a damaged or ugly portion of their fence.
- Bamboo rolls typically come in 6–8 ft (1.8–2.4 m) rolls. Expect to spend $100-200 on each bamboo roll depending on the height that you choose.
-
Use a measuring tape to determine the height you desire. You can cover your fence entirely, have your fence poke out a little at the top, or have the bamboo extend past your fencing. This is completely a matter of personal preference. Use a measuring tape to determine how high you want the fencing will go. Write this measurement down alongside the length you’re going to cover to reference it when you’re ordering your screening.
- You can purchase custom-sized bamboo screening if you live near a company that cuts bamboo to size, but most bamboo screening is 3.5 ft (1.1 m), 4 ft (1.2 m), 5 ft (1.5 m), 6 ft (1.8 m), or 8 ft (2.4 m) tall. If your fence doesn’t match these heights, decide whether you want the bamboo to be a little short or a little tall.
Advertisement -
Select a color of bamboo for your screening based on preference. Like other forms of wood, bamboo comes in a variety of colors and stains. Consult with your manufacturer to find what they have available. Natural bamboo is a great choice if you want a naturalistic look, while mahogany or black bamboo can create a modern vibe for your backyard. [1] X Research source
- You can always stain the bamboo after you install it if you want to change its color.
-
Choose the diameter of your bamboo stalks if you have an option. Some manufacturers offer bamboo stalks in different diameters. Choose your thickness based on the look you’re going for. Thinner bamboo blends together visually to create a unique look, while thicker pieces of bamboo are easily identifiable and recognizable.
- Thinner bamboo may be less than 0.5 inches (1.3 cm) in diameter. Thicker stalks may be bigger than 1.5 inches (3.8 cm) in diameter.
-
Purchase rolls of bamboo fencing from a bamboo supplier. Find a bamboo supplier in your area that sells bamboo screening or fencing. Tell them the height and length that you’re going to cover to determine how many rolls of bamboo you require. Pay for the bamboo and wait for it to be delivered to your home.
- There aren’t a ton of bamboo screening manufacturers, so you probably have to have it delivered. You may be able to pick it up in a truck if you live near the company, though!
- You can install screening on both sides of a fence if you’d like to cover it entirely. If you do, order twice as many bamboo rolls.
Tip: It helps to have a 1-2 extra rolls of bamboo screening in case some of the bamboo breaks while you’re installing it. Bamboo screening comes in preassembled rolls, so you can’t trim or replace individual stalks that break off during installation.
Advertisement
-
Lean your first roll vertically against your fencing. Start at the end where you want the edge of the screening to be. Keep the bamboo wrapped up in the packaging and lift the roll in one piece. Stand it up against your fence at a 15-degree angle. [2] X Research source
- This process is much easier if you have assistance. If you can, ask a friend or family member to help you carry the bamboo. They can also help you brace the screening as you’re installing it.
Tip: If you’re covering any corners in your yard, start at a corner. It can be kind of tricky to install a single roll at a 90-degree angle, so corners are perfect locations for 2 separate rolls to meet.
-
Unravel the bamboo and spread it out against your fence. Remove the ties or tape keeping the bamboo rolled up. With the bamboo unpacked, begin slowly unravelling the roll. For each section that you unravel, push it gently against the fencing to keep it pressed against the wood. [3] X Research source
-
Drill a screw into the bamboo while holding it flush against the fence. Grab some 2.5 in (6.4 cm) wood screws and a drill. Starting at one end of the roll, raise the bamboo up so that it’s flush against the fence at the top and bottom. Then, drive a screw through the bamboo and into the horizontal support beam at the top of your fence. [4] X Research source
- If you have someone helping you, have them brace the area next to where you’re working to keep the roll pushed against the fencing.
-
Continue driving screws through the bamboo to attach it to the fence. Place 1 screw every 6–8 inches (15–20 cm) along the support beam at the top. Continue adding your screws by drilling through the bamboo and into the wood behind it. [5] X Research source
- When drilling through the bamboo, place the head of each screw in the center of a bamboo stalk to keep the roll secured to the beam behind it.
-
Drill a screw into the bamboo at the bottom. Start at either end of the bamboo roll. Pull the bottom of the bamboo roll down to make it taut. Drill a 2.5 in (6.4 cm) wood screw through the bamboo and into the support beam at the bottom.
-
Install wood screws every 6–8 inches (15–20 cm) along the bottom. Add screws to the same stalks that you drilled in at the top to secure the roll to the fence. Continue adding your wood screws until you’ve completely secured the bottom of your bamboo roll to the support beam at the bottom.
- Repeat this process by unrolling your new sheet next to the roll that you’ve just finished installing.
- Bamboo rolls aren’t especially heavy, so you really don’t need more than wood screws to hold them in place.
Advertisement
-
Drill pilot holes through your support beam and into the grout on your masonry. Get a 2 by 4 in (5.1 by 10.2 cm) piece of wood that’s long enough to match your bamboo roll. Use a masonry drill bit to drill pilot holes through the wood and into the grout at eye level. Place 1 pilot hole every 12 inches (30 cm).
- A pilot hole is a small hole that makes it easier for the threading on a screw to catch. Use a pilot drill bit that is slightly smaller than the diameter of your screw for this.
- You cannot drill the bamboo directly into the masonry since the grout can crumble over time as the bamboo sways a little in the wind. The support beam acts as a platform for the bamboo so it won’t come loose.
-
Install your support beam with masonry drills. Hold your wood support beam up to the masonry so that the pilot holes on the wood and the pilot holes on the masonry overlap. Then, use 3.5 in (8.9 cm) masonry screws to install the support beam on the concrete wall. Drill a screw into each pilot hole to ensure that it is completely secured to the wall.
-
Install a second support beam underneath your first beam. Drill a second set of pilot holes 1 ft (30 cm) off of the floor and parallel to your first support beam. Then, repeat the process with another 2 by 4 in (5.1 by 10.2 cm) wood beam. Use masonry screws to attach the beam to the masonry.
-
Unroll your bamboo against the support beams and hold it in place. Lean your roll of bamboo against the end of the support beams and unroll it in the direction of the beams. Hold the bamboo steady and gently push down on any bamboo stalks that aren’t flush against the wall. If your roll of bamboo is particularly long, do this in 3–4 feet (0.91–1.22 m) sections.
- This is a lot easier if you have a friend or family member hold the bamboo in place for you.
-
Drill 2.5 in (6.4 cm) wood screws through the bamboo to secure it. Grab some wood screws and a drill. Starting at the support beam at the top, drill 2.5 in (6.4 cm) wood screws through the bamboo stalks and into the support beam. Place 1 screw every 12 inches (30 cm) until you’ve completely attached the bamboo sheet at the top. [6] X Research source
Tip: Pay close attention and peek behind the bamboo before drilling to avoid accidentally driving a wood screw into a masonry screw.
-
Repeat this process at the bottom of the bamboo to finish installing it. Finish installing your bamboo screening by installing a second set of wood screws at the bottom of the bamboo. Place each wood screw 12 inches (30 cm) apart and place them directly underneath the screws at the top. [7] X Research source
Advertisement
-
Unroll your bamboo against the chain link fence. Set your bamboo roll vertically against the chain link fence where you want the bamboo to start. Unravel the bamboo in the direction that you want to cover. The entire roll has to be set against the chain link fence to install it, so get help from a friend if the roll is too big and unwieldy. [8] X Research source
- It is exceptionally tricky to install bamboo on both sides of a chain link fence, so you’re better off not doing this on your front yard unless you only want to cover the exterior fence.
-
Slide some galvanized wire around the end of the bamboo and the chain links. Get a roll of galvanized wire that is at least 3 feet (0.91 m) longer than your bamboo roll. Start at either end of the bamboo. Slide the wire around the outside of the first bamboo stalk and pull it through to the opposite side of the chain link fence. [9] X Research source
-
Run galvanized wire through the fence and bamboo. Wrap the wire around the outside of the fence and then run it through your second bamboo stalk. Continue this process until you’ve wrapped the wire around every stalk and every portion of the chain link fence. [10] X Research source
Tip: If you don’t live in a particularly windy area, feel free to skip a few stalks every time you wrap the wire around the bamboo. For example, you can wrap the wire around every third, fourth, or fifth stalk.
-
Wrap the wire around chain links on both end and crimp them. Pull the wire tight on both ends to pull the bamboo taut against the fence. Then, wrap the excess wire on each end around a chain link next to it. Wrap it 3-4 times around the chain and use a crimping tool or channel locks to bend the wire tightly at the end to secure it. [11] X Research source
- Don’t use all of your weight to pull the wire tight before crimping it. If you pull too hard, you may crack the bamboo.
-
Use zip ties to provide additional support at the top of the fence. Starting at the end of the bamboo at the top, wrap a zip tie around the first stalk and the chain link behind it. Run the plastic end through the small notch on the other side of the zip tie and pull it tight. Then, add additional zip ties every 6–12 inches (15–30 cm) along the top of the roll.
-
Secure your screening by wrapping zip ties around the bottom. With the top of the fence secured, move to the bottom of your fence. Starting 1 foot (30 cm) off of the ground at the end of your fence, wrap another zip tie around the bamboo and the chain link fence. Continue installing zip ties by adding them once every 6–12 inches (15–30 cm) until you’ve fully secured your fence to the bamboo.
Advertisement
Expert Q&A
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Tips
- Bamboo fencing and screening are basically the same thing. Bamboo fencing is typically installed on wood posts, but screening is attached directly to the surface you’re adhering it to.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Things You’ll Need
Measuring and Purchasing Bamboo Screening
- Measuring tape
- Paper and pen
Adding Bamboo to a Wood Fence
- Drill
- Wood screws
Installing Bamboo Screening on Masonry
- Drill
- Wood beams
- Pilot drill bit
- Masonry screws
- Wood screws
Attaching Bamboo to a Chain Link Fence
- Galvanized wire
- Channel locks or crimping tool
- Zip ties
References
- ↑ https://youtu.be/Lx_gHhgqZZE?t=28
- ↑ https://youtu.be/Lx_gHhgqZZE?t=90
- ↑ https://youtu.be/Lx_gHhgqZZE?t=96
- ↑ https://youtu.be/Lx_gHhgqZZE?t=100
- ↑ https://youtu.be/Lx_gHhgqZZE?t=100
- ↑ https://youtu.be/Lx_gHhgqZZE?t=65
- ↑ https://youtu.be/Lx_gHhgqZZE?t=65
- ↑ https://images.homedepot-static.com/catalog/pdfImages/6d/6df5b1cc-d746-45d1-bb0e-24906d27d246.pdf
- ↑ https://images.homedepot-static.com/catalog/pdfImages/6d/6df5b1cc-d746-45d1-bb0e-24906d27d246.pdf
About This Article
Thanks to all authors for creating a page that has been read 109,499 times.
Reader Success Stories
- "How to fix the bamboo screening directly to the wall without using wood supports."
Advertisement
"How to fix the bamboo screening directly to the wall without using wood supports."
