Download Article
Download Article
Installing a touchscreen radio and reverse camera in a car involves multiple steps to ensure a neat, professional look and proper functionality. This process includes attaching the radio mount, connecting various cables, and securely installing the reverse camera. Each step must be followed carefully to avoid damage to the vehicle and ensure all components work correctly. The steps are divided into parts for clarity: installing the touchscreen radio, connecting the reverse camera, and installing the reverse camera itself.
Steps
-
1Place an adhesive patch in the correct location on the dashboard and place the mount onto it. Ensure the surface is clean before attaching the adhesive patch for a secure hold. Use a clean cloth and a cleaning solution to thoroughly wipe down the area where the adhesive patch will be placed. Make sure the surface is completely dry before continuing. Peel the backing off the adhesive patch and carefully press it onto the cleaned area, applying firm pressure to ensure it sticks well. Once the adhesive patch is securely in place, align the mount with the patch and press it firmly onto the adhesive, making sure it is level and properly positioned.
-
2Slide the touchscreen radio onto the mount. Align the grooves on the back of the radio with the slots on the mount. Gently slide the radio into the mount until it clicks into place. Ensure that the radio is firmly secured and does not wobble or move.Advertisement
-
3Plug in the power and aux cable onto the device found on the side. Locate the power and aux ports on the side of the radio. Insert the power cable into the corresponding port, ensuring a snug fit. Repeat this process for the aux cable. Double-check that both cables are securely connected and fully inserted.
-
4Place the device onto the mount on the dashboard. Carefully lift the radio and position it over the mount. Align the radio with the mount and gently lower it until it rests securely on the mount. Double check that the radio is stable and properly aligned.
-
5Plug the power cable into the cigarette lighter. Locate the cigarette lighter port in your vehicle. Insert the power cable’s plug into the port, ensuring it fits securely. This will provide power to the touchscreen radio.
-
6Plug the aux cable into the car’s stereo. Find the aux input on your car’s stereo system. Insert the aux cable’s plug into this input, ensuring a firm connection. This will allow audio from the touchscreen radio to play through the car speakers.
Advertisement
-
1Plug the reverse camera wire into the device. Locate the input port for the reverse camera on the side of the touchscreen radio. Insert the reverse camera wire into this port, ensuring it is securely connected.
-
2Tuck the reverse camera wire under the center console for neatness. Route the reverse camera wire under the center console to keep it out of sight. Use a flat tool or your fingers to gently tuck the wire along the edges of the console, ensuring it is hidden and does not interfere with any controls.
-
3Run the wire under the driver seat and through the driver rear door while keeping a gap between the door and the wire to prevent pinching the wire. Route the wire under the driver seat, ensuring it is not caught on any mechanisms.
-
4Tuck the reverse camera wire under the bedside plastic rail. Continue routing the wire along the vehicle’s interior, tucking it under the plastic rail on the side of the bed. Use a flat tool or your fingers to secure the wire in place.
-
5Run the wire from the plastic bedside rail down below the gap between the tailgate and bed. Guide the wire from the bedside rail down to the gap between the tailgate and the bed. Make sure the wire is routed neatly and safely to avoid damage.
-
6Plug the connector into the reverse camera. Attach the connector at the end of the wire to the reverse camera. Ensure the connection is secure and tight to avoid any disconnection.
-
7Zip-tie the wires in a bundle so that they are out of the way. Use zip ties to bundle any excess wire and secure it to the vehicle’s frame or other stable points. This keeps the wires organized and prevents them from hanging loose.
Advertisement
-
1Remove the taillight bolts. Use a suitable tool, such as a screwdriver or wrench, to unscrew the bolts securing the taillight. Carefully keep the bolts in a safe place for reinstallation.
-
2Remove the taillight from the vehicle. Gently pull the taillight assembly away from the vehicle, being careful not to damage any wires or connectors attached to it.
-
3Install the red power wire into the same socket as the reverse light, making sure it is on the positive side. Locate the socket for the reverse light. Insert the red power wire into the socket, ensuring it is connected to the positive terminal. Secure the connection to prevent it from coming loose.
-
4Reinstall the taillight. Position the taillight assembly back into its original location. Align the mounting holes and reinsert the bolts. Tighten the bolts securely to hold the taillight in place.
-
5Screw the reverse camera into the license plate bracket. Use the provided screws to attach the reverse camera to the license plate bracket. Ensure the camera is firmly secured and properly aligned for best visibility.
-
6Tap the icon that you want to use and begin using your display and backup camera.
Advertisement
Expert Q&A
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Tips
- Ensure all connections are secure to avoid any malfunction.Thanks
- Keep the wires neatly tucked to keep a clean installation.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Thanks for submitting a tip for review!
Advertisement
Warnings
- Be careful when running wires through doors to prevent damage.Thanks
- Double-check that the power wire is connected to the correct socket to avoid electrical issues.Thanks
Advertisement
References
- PASLDA. Newest CarPlay: Instruction Manual. PASLDA, 2024.
About This Article
Thanks to all authors for creating a page that has been read 66 times.
Advertisement
100%
of readers found this article helpful
.
Click a star to add your vote
% of people told us that this article helped them.
