The 4 Coolest Ways to Loose Lace Dunk Lows

PDF download Download Article
Lacing techniques to keep your kicks looking fresh
PDF download Download Article

Why settle for the cross-tied factory lacing when you can customize your Nike Dunks with one of the hottest new loose styles? We’ve put together instructions for 4 of the trendiest ways you can lace up your new kicks. These instructions were gathered with your Dunk Lows in mind but can also be used for high Dunks. Read on to find out how you can strut your stuff – wearing your new Dunks, of course – in style.

Easiest Way to Lace Dunks Loosely

  1. Thread your shoelace through the bottom of the shoe, ensuring both ends are even.
  2. Cross the laces and thread through the outsides of the eyelets, keeping the laces flat.
  3. Lace through the tongue loop from the nearest set of eyelets for a better fit.
  4. Push the shoelaces through the top eyelets from the inside out.
  5. Leave only 1 to 2 inches of lace hanging.
Method 1
Method 1 of 4:

Loose Lacing Dunks

PDF download Download Article
  1. With the toe of your shoe facing you, lace the left end of the shoelace through the bottom left eyelet from the outside to the inside. Then, lace the right end of the shoelace through the bottom right eyelet from the outside to the inside. [1]
    • Match both ends of the shoelace and gently pull so you have an even length of lace on each side of the shoe.
    • Make sure the laced section of the shoelace is not twisted.
  2. Hold the left shoelace and cross it over to the right side of the shoe. Thread it through the second eyelet from the bottom on the right from the outside to the inside.
    • Loop the shoelace over your finger before threading it through the eyelet to help you keep from pulling the lace too tight. [2]
    • If you pull your lacings too tight, you won’t be able to slip your shoes on and off as easily.
    • Take your time so you can make sure your lace stays flat.
    • If your lace becomes twisted, take a moment to straighten it before moving on.
    Advertisement
  3. Cross the right shoelace and thread through the second eyelet from the bottom, pulling from the outside to the inside.
  4. If you would like to lace through the tongue loop, pass the laces through the loop as you are crossing to the opposite side.
    • By lacing through the tongue loop, you prevent the tongue from falling into the shoe when you aren’t wearing it.
    • Lacing the tongue loop is optional. Some feel lacing the tongue loop ruins the even look of the lacing.
  5. Each time you thread the shoelace through an eyelet, stop to check that the lace is flat and not twisted.
  6. When you reach the top eyelet on each side, instead of looping over your finger and lacing from the outside, push the end of the lace through the inside of the eyelet. [3] Repeat on the other side.
    • When you lace the final eyelet, you should only have an inch or two of shoelace on each side.
    • If the excess lace is longer than a couple of inches, you can loosen the lacing of the shoe by carefully pulling the excess shoelace back into the lacing pattern of the shoe. This will make your shoes fit more loosely on your feet.
  7. After threading the bottom eyelets, lace shoelaces through the inside of the eyelets until you reach the tongue loops. [4] Then, reverse the pattern, lacing the eyelets from the outside in.
    • Continue in the new pattern until you reach the top eyelets on each side of the shoe. Then lace the left shoelace through the inside of the top right eyelet. Only pull 1 to 2 inches of shoelace through the to the outside of the shoe.
    • Repeat with the right shoelace, pushing only a couple of inches through the inside of the top left eyelet. Try to keep each lace even with the other.
    • Loop the excess shoelace over the tongue of the shoe. You should have two loops of extra shoelace between the top two eyelets. Tuck these into the shoe by looping over the tongue and tucking along the top of your foot.
    8. Advertisement
Method 2
Method 2 of 4:

Bar Lacing Dunks

PDF download Download Article
  1. Point the toe toward you and work from the bottom up. Keeping the shoelace on the outside of the shoe, push each end through the bottom eyelets, moving from the outside in.
    • Pull on the ends of the shoelaces until they are an even length.
    • This is your first bar.
  2. Holding the left shoelace, run it along the underside of the shoe’s upper to the second empty eyelet on the same side.
    • You will skip the eyelet directly above the first bar and lace through the third eyelet from the bottom on the left side. [5]
    • Pull the lace across the shoe and push it through the third eyelet on the right from the outside in.
    • This is your second bar, but it’s in the third set of eyelets from the bottom of the shoe.
  3. Holding the left shoelace, push it up through the underside of the eyelet directly above it on the same side of the shoe. [6]
    • Cross the lace to the right side of the shoe and thread it through the outside of the second eyelet.
    • Pull it through, leaving a little slack to keep the lacing loose.
    • You now have three bars total.
  4. Repeat steps 2 and 3 until you reach the eyelets at the top of the shoe. Skip an eyelet each time the one above it has already been laced, and push the shoelace from the inside to the outside of the eyelet.
    • When you pull a lace across the shoe, thread it through the parallel eyelet from the outside in.
    • Both shoelaces should end up on the inside of the shoe after you lace them through the last available eyelets. [7]
  5. The shoe laces should lay along the top of your foot. If that’s not comfortable, you can also tuck them along the sides.
    6. Advertisement
Method 3
Method 3 of 4:

Lattice (or Diamond) Lacing Dunks

PDF download Download Article
  1. Point the toe toward you and work from the bottom up. Push one end of the shoelace through the outside of the left bottom eyelet and then through the underside of the right bottom eyelet. Pull until each side is even.
    • The shoelace should run straight across the bottom of the shoe with the ends coming out through the bottom eyelets.
  2. Skip 1 set of parallel eyelets and then thread each end of the shoelace into the third eyelet from the bottom from the outside in. [8]
    • Your laces should look like an X.
  3. Thread the left shoelace into the empty eyelet directly below it from the inside out. [9] Repeat using the right shoelace.
  4. Cross the left shoelace over to the right side. Lace it through the right eyelet that’s fourth from the bottom, moving from the outside in.
    • Repeat on the opposite side with the right shoelace.
    • Your laces should now be in a double criss-cross pattern.
  5. You’ve already laced this eyelet, but there should be room to thread the shoelace through again from the inside out. [10]
    • Repeat on the other side.
    • You have laced the third eyelet from the bottom twice.
  6. Repeat steps 4 and 5 until you have double-laced the third, fourth, and fifth sets of eyelets from the bottom. Do not lace through the tongue loop.
  7. Cross the left shoelace over the shoe and push it into the top right eyelet. Make sure you lace it from the outside in. [11]
    • Repeat with the right shoelace, crossing over to the right top eyelet.
    • Tuck the ends inside your shoes.
    8. Advertisement
Method 4
Method 4 of 4:

Zig-Zag Lacing Dunks

PDF download Download Article
  1. Then push it through the inside of the bottom left eyelet. Pull the shoelace until both sides are even.
  2. Pull the lace so you have a loop from the bottom left eyelet to the one directly above it. [12] Make sure the lace is flat.
    • Leave just enough slack that you can lace a shoelace through the loop you just made.
  3. [13] You should now have a bar running from the inside of the left eyelet to the inside of the right eyelet, second from the bottom.
  4. You should now be lacing into the third eyelet from the bottom on the right side of the shoe. Continue to repeat steps 2 & 3 alternating sides.
    • When you reach the top eyelet on the right side of the shoe, repeat step 2.
    • Tuck the excess shoelace inside the shoe.
  5. Cross it over to the loop you made between the bottom left eyelet and the eyelet directly above. Lace the shoelace through the loop from the inside. [14] Pull it through so the shoelace is taut but not tight.
  6. You should end up lacing the shoelace through the top loop on the right side of the shoe.
    • After you pull the shoelace taut, cross over the shoe and push the end through the top eyelet on the left side.
    • Make sure you lace the eyelet from the outside so the excess shoelace hangs to the inside of the shoe. [15]
    7. Advertisement

Expert Q&A

Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!

      You Might Also Like

      5 Ways to Tie Your Nike Air Force 1s
      How to
      Spot Fake All Star Converse
      Fake vs Real Air Force Ones: How to Avoid Getting Scammed
      How to
      Tell the Difference Between Fake vs Real Golden Goose Shoes
      How to
      Stretch Sneakers
      Are Your White Converse Dirty? Here’s How to Get Them Looking Fresh
      6 Easy Ways to Clean Your Converses
      How to
      Prevent & Remove Creases in Your Air Force 1s
      How to
      Wear High Top Sneakers: Choosing & Styling Shoes
      How to
      Get Squeaks Out of Air Jordan Sneakers
      How to
      Preserve Air Jordan Sneakers
      How to
      Keep White Sneakers Clean
      How to
      Color Your Converse
      How to
      Wear Jeans with Sneakers
      Advertisement

      References

      1. ↑ https://www.aiobot.com/visual-guide-how-to-lace-dunks/
      2. ↑ https://youtu.be/wIHZD_-E_Dc?t=41
      3. ↑ https://youtu.be/wIHZD_-E_Dc?t=166
      4. ↑ https://realsport101.com/real-kit/how-to-lace-dunks-nike/
      5. ↑ https://youtu.be/R7J2toyfHdw?t=91
      6. ↑ https://youtu.be/R7J2toyfHdw?t=123
      7. ↑ https://youtu.be/R7J2toyfHdw?t=281
      8. ↑ https://youtu.be/uCN4Y85Xzj4?t=199
      9. ↑ https://youtu.be/uCN4Y85Xzj4?t=206
      1. ↑ https://youtu.be/uCN4Y85Xzj4?t=243
      2. ↑ https://youtu.be/uCN4Y85Xzj4?t=385
      3. ↑ https://youtu.be/uCN4Y85Xzj4?t=459
      4. ↑ https://youtu.be/uCN4Y85Xzj4?t=474
      5. ↑ https://youtu.be/uCN4Y85Xzj4?t=588
      6. ↑ https://youtu.be/uCN4Y85Xzj4?t=654

      About This Article

      Thanks to all authors for creating a page that has been read 22,774 times.

      Did this article help you?

      Advertisement