Download Article
Download Article
Dark black leather has a distinctive, sophisticated look. If you have undyed, vegetable-tanned leather you want to turn black, you don’t have to buy black leather dye at the store. You can make it at home from cheap materials, most of which you probably already have lying around. You’ll just need some vinegar and some steel wool to make the dye, and some baking soda to make a neutralizer. This particular kind of black leather dye is called vinegaroon, and it will turn your leather a rich, dark black color.
Steps
-
Soak some steel wool in a bucket with a bottle of acetone for 2 hours. Place the steel wool in the bucket first and then pour in the acetone, to avoid splashing acetone. Soaking in acetone will make the steel wool more susceptible to oxidation. This way the steel wool will rust more easily when you add the vinegar. [1] X Research source
- Steel wool that's graded #0000 will work the best, but feel free to use whatever you have around the house.
- Acetone is often sold as nail polish remover. [2] X Research source
-
Put some steel wool into a glass jar. Make sure to use a glass jar, and not a metal container. Vinegar corrodes metal, so it would eat up a metal container! Separate the steel wool with your hands before placing it in the jar to make sure it has as much surface area as possible. [3] X Research source- Steel wool can be sharp when you separate it, so consider wearing gloves to protect your hands.
Advertisement -
Warm up several cups of distilled white vinegar on the stove. Pour the vinegar into a pot and heat on the stove for a few minutes, until it reaches about 100 Fº (38 Cº). The warmth of the vinegar will help speed up the reaction. [4] X Research source
- You can check the temperature of your vinegar while it’s heating by placing a kitchen thermometer into the pot.
-
Pour the vinegar into the jar and cover the jar with saran wrap. Fill the jar until it is almost at the top. Seal the jar with saran wrap and a rubber band. Punch some holes in the saran wrap so that gases can escape. After a few days, the vinegar will rust the steel wool. [5] X Research source
- Covering the jar most of the way will prevent debris from getting in. [6] X Research source
-
Let the jar sit for 3 days to a week. Every day, open the jar, stir the solution, and check the color. When the liquid has an opaque, light brown color, it is ready to use. The longer you wait, the darker it will get. [7] X Research source
- Don’t worry if your solution smells bad, that means it’s working!
-
Pour a bit of baking soda into another glass jar to make the neutralizer. Aim for a ratio of 1 part baking soda to 16 parts water. Baking soda will make a neutralizer that cuts the smell of the vinegar solution. It will also prevent the black leather dye from rubbing off your leather and getting onto other surfaces once it has set. [8] X Research source
-
Fill the baking soda jar with water and stir. Use room temperature water. The water will dissolve the baking soda to make your neutralizer. Stir until all the baking soda has dissolved. The baking soda should be barely visible in the water. [9] X Research source
- Once the baking soda has dissolved, set aside the neutralizer solution.
Advertisement
-
Test the dye by painting it on a small scrap of leather. Avoid touching the solution with your hands. Check to see if the leather has a dark matte color. If not, try adding more steel wool and letting the solution soak for several more days. If the scrap of leather comes out black, the dye is working! You’re ready to use it on whatever you want to dye. [10] X Research source
- If your solution has sludge on top, you can strain it through a strainer to leave the sediment behind. [11] X Research source
-
Dye your leather with the vinegar solution. Use a paintbrush or a dauber to apply the vinegar solution. Don't worry if the dye appears clear when you first apply it, or if the leather doesn’t look dark at first. After a few minutes, it will turn dark. [12] X Research source
-
Wait 3 minutes for the dye to seep into the leather. As the dye gradually seeps into the leather, it will turn the leather into a rich, dark black. If after 3 minutes, the leather is the color you want it to be, move on to neutralizing your leather. If not, you can apply a second coat. [13] X Research source
-
Apply a second coat of dye if necessary. Again, apply the dye with a paintbrush or dauber. Wait 3 minutes for the dye to seep in, and check the color. Repeat until your leather is the desired darkness. [14] X Research source
-
Neutralize the leather with the baking soda solution. Once your leather is dark enough, it’s time to neutralize the acid from the vinegar. Apply the neutralizer with a paintbrush. [15] X Research source
- Leave the neutralizer on the leather for at least 20 minutes. This will give time for the baking soda solution to seep into the leather and remove the acidity.
- If a residue of baking soda remains after 20 minutes, dab the leather with a damp cloth to clean.
-
Condition the leather with leather conditioner. Put some conditioner onto a soft cloth. Rub the cloth over the leather gently. This will prevent the leather from cracking. Now your leather is dyed and finished!
- The vinegar smell might linger for a few weeks, but with plenty of airing out, it should dissipate.
Advertisement
Community Q&A
Search
-
QuestionI want to change the color of a pair of boots from brown to black, will this work for this purpose?CrazyGirl4Community AnswerIf the boots are leather it should. It depends on the boots. It may be cheaper/easier/safer to buy a new pair of boots.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Things You'll Need
- 1 bottle of acetone
- 2 glass jars
- Saran wrap
- 1 rubber band
- 1 package of #0000 steel wool
- 1 bottle of white vinegar
- 1 box of baking soda
- Leather conditioner
Tips
- This dye also works on oak! If you have a piece of oak wood you’d like to dye black, paint it with this black leather dye. [16] X Research sourceThanks
- Remember, this dye only works on vegetable-tanned leather!Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Thanks for submitting a tip for review!
Advertisement
Warnings
- Vinegar is slightly caustic and can cause irritation to the skin. Make sure to rinse your hands if you come in contact with vinegar.Thanks
- Wear glasses or goggles to prevent vinegar getting in your eyes.Thanks
Advertisement
References
- ↑ https://youtu.be/2RAEWAdkcz0?t=33
- ↑ https://www.chemicalsafetyfacts.org/acetone/
- ↑ https://youtu.be/2RAEWAdkcz0?t=160
- ↑ https://youtu.be/2RAEWAdkcz0?t=95
- ↑ https://youtu.be/2RAEWAdkcz0?t=105
- ↑ https://youtu.be/tqFnBcKUdhA?t=87
- ↑ https://youtu.be/F2nbQo6fdqQ?t=38
- ↑ https://youtu.be/F2nbQo6fdqQ?t=88
- ↑ https://youtu.be/F2nbQo6fdqQ?t=88
About This Article
Thanks to all authors for creating a page that has been read 87,106 times.
Advertisement
100%
of readers found this article helpful
.
Click a star to add your vote
% of people told us that this article helped them.
