How to Paint a Golf Cart

Co-authored by Andres Matheu

Last Updated: December 1, 2022 Approved

If your plain white golf cart looks a little dull for your taste, spruce it up with a paint job. Even if you've never painted before, anyone from an amateur to an expert decorator can make a golf cart look sleek and smooth. You can paint your cart any color that you'd like as long as you've got acrylic spray paint and time. Just make sure you paint your cart at least two days before you plan to use it so the paint has time to dry.

Part 1

Part 1 of 4:

Priming the Cart

Download Article

1
Clean your cart. Residual dirt can cause your coats of paint to flake or peel. Remove all dirt and grime from your cart with an oil-based dish soap. Hose off the soap with cold water, and dry off your cart with a towel. Avoid applying the paint until your cart is completely dry.
- Mix dish soap with water in a bucket and apply it to your cart using a rag or sponge.
- Clean out the inside of your cart as well, removing any belongings or trash, so your cart looks like new once you're finished.
2
Strip the golf cart of its trim. Take off any removable parts of the golf cart that you do not want painted. This will prevent them from getting in the way as you work. In addition to the trim, remove the bumpers, roof, and other parts of the frame you don't want to paint. ^{[1]
X
Research source}
- Make a note or take pictures of where each removable piece goes so you know where to reattach them later.
Advertisement
3
Apply masking tape to areas you don't want painted. For non-removable parts of the golf cart that you want to protect from paint, use masking tape. Keep an eye out for license plates, logos, or other decals that you want to keep visible. Line the outer edges of the windows to keep from spray painting them.
- Use soft-edged foam tape to avoid damaging your cart.
4
Sand down the body of the cart with fine-grit sandpaper. Rub down the area in a circular motion with firm pressure. This will help the paint stick to the golf cart's nonporous surface. Make sure to sand away any old paint to avoid it tinting your fresh coats. ^{[2]
X
Research source}
- Consult a sandpaper size chart to find fine-grit sandpaper. 120 to 400 grits is ideal. ^{[3]
  X
  Research source}
- After you've finished sanding, use a microfiber cloth to brush off any sanding dust.
5
Apply a thin coat of paint primer to prevent peeling later on. Primer helps the spray paint adhere smoothly and evenly to the cart. Spray the primer in even amounts over the body of the golf cart and wait approximately twenty minutes before adding on paint. Check the primer's packaging instructions for specifically how long to let it dry. ^{[4]
X
Research source}
- Use a paint primer made specifically for plastic surfaces.
- If your golf cart is a darker color, apply two coats of primer. Wait twenty to thirty minutes before applying the second coat.

Part 2

Part 2 of 4:

Applying the Paint

Download Article

1
Use an acrylic spray paint. Acrylic paints adhere better to plastics than most types, so avoid vinyl, lacquer, enamel, or chalkboard spray paints. If available, plastic fusion spray paint is also ideal for adhering to smooth surfaces.
- Start with one standard can of spray paint and purchase additional cans as needed. Make a note of where you purchased your first can so you know where to find the right color.
2
Add a base coat of paint. Your base coat should go on lightly so it sticks well to the primer. Aim your paint can perpendicular to the area you're spraying at about 10–12 inches (25–30 cm) away from the surface. Spray the paint in horizontal sweeps, releasing the tip once you've reached the other side. Slight overlap is okay, but try to apply only one layer at a time. ^{[5]
X
Research source}
- Spray in short spurts instead of a constant stream for a more focused coat.
- In most cases, you will need to apply at least two to three coats.
Each coat should be distinct and applied separately. Consult your spray can's instructions for drying times, and wait until that much time has passed to start on a second coat. Usually, between twenty to thirty minutes is sufficient. ^{[6]
X
Research source}
Each coat will make your cart's color look richer and more opaque. Continue applying coats until you reach the desired color. Plan out enough time to apply at least three coats of paint, though you may need more to make the color you want.

Part 3

Part 3 of 4:

Finishing Your Paint Job

Download Article

Removing the tape before it cures will give the paint lines a nice, crisp finish. Try not to touch the paint, with your gloves or otherwise, to avoid smudging. ^{[7]
X
Research source}
2
Add a coat of clear acrylic sealant. After you've reached the color you want, acrylic sealant can secure the coats and give your cart a glossy finish. Sealant can be applied like spray paint, so choose a spray can if you've never used paint sealants before. After applying the coat, wait thirty minutes before proceeding to finish the cart. ^{[8]
X
Research source}
- One coat is necessary, but two coats can create an optional protective layer. Wait thirty minutes in-between applying coats.
Either after or while your sealant is drying, remove the drop cloths from the ground and store them as desired. Place any remaining spray cans in a room temperature drawer for future use. Dispose of or recycle any newspapers, rubber gloves, or sandpaper squares.
4
Let your cart dry for at least twenty-four hours. Although the sealant may seem dry after two hours, the cart will need time to cure after painting to fully set. Leave your cart outside or in your garage with the windows and doors open and leave it alone for a full day. Do not touch your cart during this period to avoid fingerprint smudges.
- Reattach any parts you removed before painting after the cart has dried.
- Check the weather report for the next day to make sure your cart will not receive wind or rain exposure. If the weather looks stormy, paint your cart in the garage with the doors open.

Part 4

Part 4 of 4:

Staying Safe

Download Article

1
Choose a windless, well-ventilated location. Paint fumes can induce respiratory problems if used indoors. If possible, paint your golf cart outside. Paint in the garage on windy or stormy days. Wind can inhibit your ability to aim directly at the cart and blow dirt on your fresh coat. ^{[9]
X
Research source}
- If you begin having breathing troubles or experience nausea, remove yourself from the area to a well-ventilated place. Call Poison Control for further instructions.
- If you are painting in your garage, make sure to open the door to avoid fume inhalation.
2
Surround the golf cart with drop cloths. Spray paint has a less focused range than some painting methods, and you'll want to avoid painting the floor by accident. If you don't have a drop cloth on hand, cover the area directly below your cart's body with old newspapers.
- Choose canvas over plastic drop cloths, as cloth is less slippery and stays more secure on the floor. ^{[10]
  X
  Research source}
3
Purchase a pair of disposable gloves. Gloves protect your hands from paint or primer stains while you're working on the cart. Try not to use gardening or mechanic's gloves while you're working to avoid staining your carts with dirt or grease. Disposable rubber gloves are ideal to keep your work area clean. ^{[11]
X
Research source}
- Scrub the paint off with soap and warm water immediately if you get paint on your hands.
Spray paint can be tough to remove from clothes. Avoid wearing anything you care about in case of any mishaps. An old t-shirt and sweatpants are the perfect attire for painting a golf cart.
Spray paint can emit toxic fumes, and some people may be more vulnerable to breathing troubles than others. Wear a dust mask to protect your breathing, especially if you're painting in your garage. Put on a pair of goggles as well to protect your eyes. ^{[12]
X
Research source}

Community Q&A

Search

Add New Question

Question

What kind paint and primer do I use on fiberglass golf cart?

Community Answer

Fiberglass surfaces are nonporous, much like plastic, and react best to acrylic spray paint. Make sure you apply at least two coats of acrylic paint primer before painting.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 1 Helpful 11
Question

How would I paint words onto my cart?

Community Answer

I would suggest using a vinyl letter cutting machine for a professional look. I would put the letters on after the paint but before using the sealant, which will offer protection from peeling or scratching.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 1 Helpful 7
Question

When sanding a golf cart before painting it, what grit should I use?

Community Answer

1000 grit is better for a fine finish and reduces the risk of sanding into the fiberglass body too deeply.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 11 Helpful 7

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Tips

Craft stores usually have more spray paint color options than hardware stores but can cost more money. ^{[13]
X
Research source}

Thanks
Helpful 1 Not Helpful 1
Shake your paint can well before using.

Thanks
Helpful 1 Not Helpful 1
Prepping your area and golf cart is important. Do not skip through any preparatory steps like sanding or cleaning out the cart. The paint coats will not turn out as well.

Thanks
Helpful 1 Not Helpful 0

Submit a Tip

All tip submissions are carefully reviewed before being published

Name

Please provide your name and last initial

Submit

Thanks for submitting a tip for review!

Warnings

Keep small children and pets away while painting your golf cart.

Thanks
Helpful 2 Not Helpful 0
Do not rush through the paint job. Your golf cart will look best if you take your time and wait between coats.

Thanks
Helpful 1 Not Helpful 0
Spray paint is flammable. Keep your paint cans away from heat sources (like water heaters) and never leave them alone in direct sunlight.

Thanks
Helpful 0 Not Helpful 0

Things You'll Need

Dish soap
Water
Towel
Newspapers or drop cloths
Goggles
Dust mask
Disposable gloves
Sealant
Fine-grit sandpaper
Microfiber cloth
Paint primer
Acrylic spray paint
Masking tape and/or plastic bags

[1]

[2]

[3]

[4]

[5]

[6]

[7]

[8]

[9]

[10]

[11]

[12]

[13]

Log in

How to Paint a Golf Cart

Steps

Priming the Cart

Applying the Paint

Finishing Your Paint Job

Staying Safe

Community Q&A

Tips

Warnings

Things You'll Need

You Might Also Like

References

About This Article

Reader Success Stories

Did this article help you?

Quizzes

You Might Also Like

Featured Articles

Trending Articles

Featured Articles

Featured Articles

Watch Articles

Trending Articles

Quizzes

Explore Categories