Download Article
Download Article
Marble countertops can elevate the overall feel of your kitchen by adding a sense of class and beauty. However, it’s easy to permanently damage marble, and tricky to it keep looking good if you aren’t sure how to protect it. To protect your marble countertop, choose and test a sealer, apply your chosen sealer, and keep the countertop clean.
Steps
-
Buy an acid-resistant impregnator sealer. There are many different counter sealers out there to choose from. However, depending on the ingredients, some will be effective and others may cause damage. Read the label carefully and make sure to go with a sealer that is an acid-resistant impregnator. Stay away from the following:- Citrus ingredients
- Surface sealers
- Linseed oil
-
Test the marble with water or mineral oil. Sealing your countertop is probably the best way to protect it, but before sealing it, you should make sure it needs to be sealed. Put a few drops of mineral oil or water on your counter and leave it for a few minutes (4 minutes for the water and 10 for the mineral oil). Wipe up the liquid. If a dark spot or stain is left behind, then it’s time to seal your countertop.- Don’t worry about the water or mineral oil leaving a spot behind; the liquid should evaporate within a half hour.
Advertisement -
Clean the countertop with soap and water. Once you’ve determined that your countertop needs to be sealed, give it a good cleaning. Clean the countertop using a clean, soft cloth, a mild soap, and warm water. Afterwards, dry the area thoroughly with a clean, dry cloth. [1] X Research source- Don’t clean your countertop with any harsh or acidic chemicals or products, such as bleach or lemon juice.
-
Read the instructions on the sealer’s label. Before applying the sealer, it’s important to read and understand the manufacturer’s directions on how to do so. Different manufacturers require using different application techniques and amounts of sealer, depending on the type of stone as well as the type of finish.
Advertisement
-
Apply the sealer by spraying and rubbing it in. Begin following the sealer’s directions. Typically, the sealer label will instruct you to spray the entirety of your countertop with the sealer and then rub it in with a clean, soft cloth.- If you’ve never sealed you countertop before with the product you’re using, consider treating a small area and checking it 24 hours later to make sure it had a positive effect on your countertop.
- If your countertop has a large surface area, you may want to treat small sections one at a time.
-
Wait 5 minutes and remove any excess sealer. Unless otherwise instructed, let the sealer soak in for about 5 minutes and then get a clean microfiber cloth to use to wipe up any excess.- If you happened to apply the perfect amount of sealer, then there may not be any left for you to remove. If this is the case, do a quick counter wipe with the microfiber cloth anyway.
-
Apply a second coat after 15 minutes. It’s common and often beneficial to do more than one coat when applying sealer, mostly because multiple coats ensure full coverage. Make sure to wait at least 15 minutes so that the first coat can completely soak in, and then apply additional coats as needed and/or specified in your sealer’s directions. -
Seal your countertop once a month. In order to provide the best possible protection for your countertop, you’ll need to repeat this process about once a month. Your marble countertop can stain easily and quickly, but with a strong sealer always on it, you’ll have a little more time to clean up any spills and prevent staining or etching. [2] X Research source
Advertisement
-
Wipe up spills immediately. If you want to keep your marble countertop in pristine condition, it’s vital that you wipe up any spills as soon as they happen. Marble is especially sensitive to acidic substances such as coffee, soda, fruit juices, and many common cleaning products. As soon as a liquid comes in contact with your counter, wipe it up with a paper towel, sponge, or soft cloth. [3] X Research source- Keep a hand towel nearby to ensure quick clean up.
-
Remove stains right away. If you wipe up a spill and it has already created a stain, remove the stain right then and there. Different kinds of stains require different removal techniques. Make sure you remove the stain quickly and properly.- Remove an oil-based stain with a soft liquid cleanser, liquid detergent, ammonia, or mineral spirits.
- Remove an organic stain with a mixture of 12% hydrogen peroxide and a few drops of ammonia.
- Remove water stains with dry steel wool. [4] X Research source
-
Use cutting boards, coasters, placemats, and trivets. All of these items create a barrier between your countertop and potentially damaging substances. This will prevent etches, scratches, and burn marks from permanently scarring your marble countertop. [5] X Research source -
Apply a poultice to your countertop. If your marble countertop is looking especially dirty, dull, or stained, it might be best to apply a paste-like cleaning agent, such as baking soda, to your entire countertop. Mix the paste and slather it onto the counter evenly with a spatula so that it’s ¼ to ½ inch (0.64-1.27cm) thick. Cover it with plastic wrap and tape down the edges with painter’s tape. Remove the plastic after 24-48 hours, let the paste dry out, and then remove it with a wooden or plastic scraper. [6] X Research source
Advertisement
Expert Q&A
Search
-
QuestionHow do you keep marble from staining?Mitchell Newman is a Construction Professional based in Chicago, Illinois. He is the Principal at Habitar Design, an interior design firm that specializes in floor plans, kitchen and bath design, furniture layout, custom built-ins, custom and semi-custom cabinetry, staging, models, and facades. Habitar features a strong design-build capability, utilizing Mitchell’s sister company, Stratagem Construction. Mitchell is the General Contractor at Strategem, and has 20 years of experience in construction, interior design and real estate development. Mitchell’s two companies seamlessly combine interior design with construction, allowing him to design with synchony for the client. He received an M.D. from the University of Chicago Pritzker School of Medicine and a BS in Chemistry from the University of Illinois Urbana-Champaign.Marble will stain even if you apply a sealer. Marble countertops need to be sealed, which will slow down water penetration and other stains. Even with sealing, though, marble countertops stain easily. Over time, it's going to have a worn-in patina, but if you're going for an old farmhouse look or something similar, that might fit perfectly with what you want.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Things You'll Need
- Warm water
- Mild soap
- Clean, soft cloths
- Mineral oil
- Impregnating sealer
- Cutting boards
- Coasters
- Placemats
- Trivets
- Steel wool
- Ammonia
- Hydrogen Peroxide
- Baking soda
- Wooden or plastic spatula
- Plastic wrap
- Wooden or plastic scraper
References
- ↑ https://www.youtube.com/watch?v=g3NiBbKV_4k
- ↑ https://www.houzz.com/ideabooks/50954561/list/how-to-clean-marble-countertops-and-tile
- ↑ http://www.countertopspecialty.com/marble-cleaning.html
- ↑ https://www.houzz.com/ideabooks/50954561/list/how-to-clean-marble-countertops-and-tile
- ↑ http://www.countertopspecialty.com/marble-cleaning.html
- ↑ https://www.houzz.com/ideabooks/50954561/list/how-to-clean-marble-countertops-and-tile
About This Article
Article Summary
X
Since marble can be permanently damaged, you should protect your countertop with a sealer. Look for an acid-resistant impregnator sealer in your local home improvement store. Before you apply your sealer, you’ll need to clean the countertop with a soft cloth and warm soapy water. Then, spray the sealer onto your countertop and rub it in with a clean cloth. Leave it to soak for 5 minutes and remove any excess sealer with a new cloth. After 15 minutes, apply a second coat to make sure you cover the whole surface. You’ll need to repeat the process about once a month to keep your countertop protected from stains or scratches. For more tips from our Home Improvement co-author, including how to keep your marble countertop clean, read on!
Did this summary help you?
Thanks to all authors for creating a page that has been read 241,908 times.
Reader Success Stories
- "Great article and very informative. I would have never known about using baking soda for stains. I'm going to keep this information for future use. I just installed a marble counter and want to keep it looking nice! Thank you!" ..." more
Advertisement
97%
of readers found this article helpful
.
Click a star to add your vote
% of people told us that this article helped them.
"Great article and very informative. I would have never known about using baking soda for stains. I'm going to keep this information for future use. I just installed a marble counter and want to keep it looking nice! Thank you!"
..."
more
"The step by step instructions are perfect for those like myself who knew nothing about sealing, so thank you!"
"Tips on what to use to clean my marble top was helpful, thanks!"
"Thank for warning about acid cleaning."
"Good for my kitchen floor."
