Download Article
Learn the proper way to don sterile gloves
Download Article
People working in the medical field frequently use sterile gloves and need to know how to properly wear them. Putting them on the right way can prevent the transmission and contraction of infectious diseases to both the patient and the health-care provider. You can put on sterile gloves by ensuring your hands are clean and then sliding them into the gloves.
Steps to Put on Sterile Gloves
Wash your hands thoroughly and open the sterile glove packaging. Grab the glove and let it hang with the fingers pointing downward. Slide your hand into the glove with your palm facing up and your fingers open. Make sure your hands do not go below your waist or above your shoulders to ensure sterility.
Steps
-
Choose the proper glove size for you. Sterile gloves come in a wide range of sizes. These can vary by company. Try on several different pairs of sterile gloves until you find the right fit. Once you've found the right fit, you will have to discard the gloves you tried on and put a new, fully-sterile pair on. Feel for the following to identify when you have the right size for your hand:- Ability to move your hands comfortably
- No friction on your skin
- Little to no sweating
- Little or no hand muscle fatigue
-
Remove your jewelry. Although not necessary, consider taking off any rings, bracelets or other jewelry on your hands. These could contaminate your gloves or make them difficult to put on and uncomfortable to wear. Removing your jewelry also minimizes the risk of your glove tearing. [1] X Research source- Put your jewelry in a safe place where you can easily find it when you’re done with your gloves.
Advertisement -
Wash your hands thoroughly. Before you touch your gloves or slide on your sterile gloves, wash your own hands. Lather up your hands with soap and water. Rub your hands under the water flow for at least 20 seconds. Rinse your hands and wrists thoroughly and then dry them. [2] X Research source- Use an alcohol-based hand sanitizer if you don’t have soap and water.
- Some types of sterile procedures require a different type of soap and a different amount of scrubbing type. [3] X Trustworthy Source Centers for Disease Control and Prevention Main public health institute for the US, run by the Dept. of Health and Human Services Go to source
-
Keep your hands above your waist. Once you’re hands are thoroughly clean, avoid letting them fall below your waistline. Holding them above this level can minimize the risk of contaminating them. If your hands do fall below your waist, repeat the hand washing process before putting on your gloves. [4] X Research source- Standing up may help keep your arms above your waist.
Advertisement
-
Open the sterile glove package. Inspect the package for rips, discoloring, or dampness, and discard if the package is compromised. Open the outer wrap of the pack. Make sure to open from top then bottom and then on the side. Remember, you only have a 1 inch margin you can touch. This will expose the sterile inner package that contains your gloves. [5] X Research source- Note that sterile gloves also have a shelf-life. Before putting on your gloves, ensure that they're not expired.
-
Remove the inner wrap. Take out the inner wrap and place it on a clean surface. Make sure you can see both sterile gloves through the packaging to ensure that you’ve opened the package properly. [6] X Research source -
Pick up your dominant hand glove. Using the hand you don’t use to write, grab the glove for your dominant hand. Touch only the inside of the glove cuff (the side of the cuff that will be touching your skin). Putting on your dominant hand glove first can minimize the risk of ripping or contamination to the hand you’re likely using most. [7] X Research source -
Place the glove onto your dominant hand. Let the glove hang with the fingers pointing downward. Make sure your hands are not below the waist and above the shoulders to ensure the sterility. Then slide your dominant hand into the glove with your palm facing up and fingers open. [8] X Research source- Remember to touch only the inside of the glove to prevent any potential contamination.
- Make adjustments only once the other glove is on.>
-
Slip on the second glove. Put the fingers of your gloved hand into the folded cuff of the other glove and lift it up. Keeping your second hand flat and palm facing up, place the glove over your fingers. Then pull the second glove over your hand. [9] X Research source- Hold your gloved hand up to prevent touching your bare palm or wrist.
-
Adjust your gloves. Once both gloves are on, you can adjust them. Reach under the cuffed part of each glove to pull them up or make any other adjustments you may need. Do not reach between the skin and the cuff. Smooth each glove out on your hands. They should feel snug without cutting off your circulation or feeling uncomfortable. [10] X Research source -
Check the gloves for rips. Look over each hand and glove thoroughly. If you notice any visible rips, tears, or other issues, re-wash your hands and put on new gloves.
Advertisement
Expert Q&A
Search
-
QuestionWhat if you rip or tear the gloves?Sarah Gehrke is a Registered Nurse and Licensed Massage Therapist in Texas. Sarah has over 10 years of experience teaching and practicing phlebotomy and intravenous (IV) therapy using physical, psychological, and emotional support. She received her Massage Therapist License from the Amarillo Massage Therapy Institute in 2008 and a M.S. in Nursing from the University of Phoenix in 2013.If you notice a rip or tear in the gloves upon putting the gloves on, you will need to discard the ripped gloves. Then, restart the process by getting a new pair of sterile gloves and re-washing your hands. If the packaging is ripped, wet, soiled, or discolored discard the package and use a different pair of sterile gloves.
-
QuestionHow do I put on rubber gloves over surgical gown cuffs?Sarah Gehrke is a Registered Nurse and Licensed Massage Therapist in Texas. Sarah has over 10 years of experience teaching and practicing phlebotomy and intravenous (IV) therapy using physical, psychological, and emotional support. She received her Massage Therapist License from the Amarillo Massage Therapy Institute in 2008 and a M.S. in Nursing from the University of Phoenix in 2013.This can be difficult. But you can do it if you follow the same technique as above. As you lower the cuffs of the sterile gloves you would place them over the surgical gown cuffs instead of over your skin.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Warnings
- If you accidentally touch your skin or another object while putting on the gloves, they've been contaminated.Thanks
- If the gloves get contaminated in any way, re-wash your hands before putting on a new pair of sterile gloves.Thanks
- Learning how to put on sterile gloves is not easy and can be frustrating. Practice several times before it is time for you to perform a procedure that requires you to use sterile gloves.Thanks
- The procedure above is known as "'open glove technique", which is for use without a surgical gown. If your wearing a gown (such as in the OR), you shouldn't use open glove technique, but rather should use a different method called "closed-glove technique. which is required by formal policy in most medical institutions.Thanks
Advertisement
Things You'll Need
- Clean working space
- Soap or alcohol-based hand sanitizer
- Sterile gloves
References
- ↑ http://www.registerednursern.com/how-to-put-on-sterile-gloves-donning-sterile-gloves-clinical-nursing-skills/
- ↑ https://www.saintlukeskc.org/health-library/discharge-instructions-using-sterile-glove-technique
- ↑ https://www.cdc.gov/clean-hands/about/hand-hygiene-for-healthcare.html
- ↑ https://opentextbc.ca/clinicalskills/chapter/sterile-gloving/
- ↑ https://opentextbc.ca/clinicalskills/chapter/sterile-gloving/
- ↑ https://www.saintlukeskc.org/health-library/discharge-instructions-using-sterile-glove-technique
- ↑ https://wtcs.pressbooks.pub/nursingskills/chapter/4-8-checklist-for-applying-and-removing-sterile-gloves/
- ↑ https://opentextbc.ca/clinicalskills/chapter/sterile-gloving/
- ↑ https://wtcs.pressbooks.pub/nursingskills/chapter/4-8-checklist-for-applying-and-removing-sterile-gloves/
About This Article
Article Summary
X
Putting on sterile gloves the right way can prevent the spread of disease. First, remove any rings and wash your hands thoroughly with soap and water. When your hands are clean, keep them above your waistline to minimize the risk of contamination. Open the sterile glove package, remove the inner wrap, and pick up one of the gloves. Let it hang down with the fingers pointing toward the floor, then slide your hand into it. Put your gloved fingers into the folded cuff of the other glove to pull it on. For more tips from our Medical co-author, including how to check your sterile gloves for rips, keep reading!
Did this summary help you?
Thanks to all authors for creating a page that has been read 215,961 times.
Reader Success Stories
- "This information really can help me take my dad's urine sample to test for his urinary health, many thanks to wikiHow and everyone involve." ..." more
Advertisement
88%
of readers found this article helpful
.
Click a star to add your vote
% of people told us that this article helped them.
"This information really can help me take my dad's urine sample to test for his urinary health, many thanks to wikiHow and everyone involve."
..."
more
"I am a nurse midwife, and this helped me to refresh my memory on the procedure to put on gloves. "
"It is very easy to read the procedure."
"Good help, very clear."
