How to Record Sound Produced by Your Sound Card

PDF download Download Article
PDF download Download Article

You've outfitted your computer with the best sound card, hooked it up to great speakers, and now it sounds great. But how do you capture the sounds you find on the internet or concoct yourself? Here are few ways you can do it.

Method 1
Method 1 of 5:

Recording To The Computer From The Sound Card

PDF download Download Article
  1. Most current operating systems and consumer-lever sound utilities prevent this.
    • You may have some success downloading older drivers, but this could also cause problems when run with newer versions of software or operating systems.
  2. Other sound recorders offer the same principles and features, generally.
    3. Advertisement
Method 2
Method 2 of 5:

Using Windows Software

PDF download Download Article
  1. You can find this in the Device Toolbar, or in Device Preferences. If nothing is showing, you might need to enable it using the sound card's control panel as outlined below.
  2. Right-click inside the Recording tab and select Show disabled devices. Right-click again and check Show Disconnected Devices .
  3. If your sound card has a physical input such as mic or line in, connect the required cable as directed in the manual.
  4. Right-click the input device you want to use for recording and choose Enable.
    • Right-click again over your chosen input device and select Set as Default Device .
    • Right-click again over your input device, select Properties and then the Levels tab, and ensure the volume slider is turned up.
  5. Turn off any other sound effects as well, unless they are essential to the functionality of your sound card.
    • Right-click over Microphone and choose Properties then look for an Enhancements tab where you can Disable all sound effects.
    • On Windows 7, click the Communications tab. Under When Windows detects communications activity: , choose Do nothing.
    • If you frequently make internet calls, right-click over the mic and choose Set as Default Communication Device.
  6. Right-click your input device, select Properties , then click the Advanced tab and verify that the Default format matches both the project rate (bottom left of the Audacity screen), and with the number of recording channels in the Devices tab of Audacity Preferences. Click OK .
  7. In the Sound control panel, click the Playback tab, right-click over the speakers or headphones device for your sound card and set it as Default Device or Default Communication Device.
  8. Right-click and click Properties then the Advanced tab, and set Default Format to match with the settings in Step 7 above.
    9. Advertisement
Method 3
Method 3 of 5:

Using Windows Hardware

PDF download Download Article
  1. Connect a cable with a mini-plug from the line out of your sound card (the green port) to the line in (blue port).
    • Note that all sounds from your computer will be recorded, including system sounds like beeps, alarms, and alerts. You may wish to disable these before recording.
    • Use a single-to-double stereo adapter on the output port, then plug a single-to-single stereo cable from one side of the adapter to the input port, and a pair of headphones into the second side of the adapter, so you can monitor what you're recording.
    3. Advertisement
Method 4
Method 4 of 5:

Using a Macintosh

PDF download Download Article
  1. Soundflower is a free, open source Mac OS X (10.2 and later) system extension that allows applications to pass audio to other applications.
  2. You'll be directed to a download page. Choose the version that's appropriate for your hardware and OS configuration.
    • When it has completed its download, install into the Applications folder.
  3. It's located inside the Soundflower folder, and when launched will appear on the right of your menu bar as a flower icon.
  4. From the Apple Menu , select Sound Preferences ...
  5. Click the Output tab, then select Soundflower (2ch) from the output list.
  6. Click on the Sound Effects tab, and from the Play alerts and sound effects through: drop-down menu, choose Line Out or Internal Speakers , as appropriate for your setup, then close the window.
  7. Click on the Soundflower icon in your menu bar, and select Built In Line Output in the Soundflower (2ch) section. Make sure that the Soundflower (16ch) is set to None(Off) .
  8. From the Soundflower menu, select Audio Setup ... and from the resulting Audio MIDI Setup menu bar select Window > Show Audio Window .
  9. From the list of outputs on the left, select Soundflower(2ch) option. Click the Input button.
    • Set the Format to the desired sample rate. Default will be 44100Hz (CD quality).
    • Set the Master volume and channels 1 and 2 to a value of 1.
  10. Click on the Output button, and adjust the settings as follows.
    • Set the Format to match the input value. Default will be 44100Hz.
    • Set the Master volume and channels 1 and 2 to a value of 1.
    13. Advertisement
Method 5
Method 5 of 5:

Recording To Another Device

PDF download Download Article
  1. If recording to the internal sound card is not possible for whatever reason, there is still a way to capture your computer's audio by using an external device plugged into your computer's output.
  2. Connect a stereo sound cable (usually a stereo mini-plug) into the output port of your computer's sound card (the green port), and the input of an external device. These include:
    • An MP3 recorder.
    • Smart phones like the iPhone or Android.
    • A professional recording system.
    • You can even use a second computer.
    • As with the Hardware Method outlined above, all sounds from your computer will be recorded, including system sounds like beeps, alarms, and alerts. You may wish to disable these before recording.
    4. Advertisement

Community Q&A

Search
Add New Question
  • Question
    What app should I use for recording music with a mic on an Android phone?
    Community Answer
    Shazam is a great option.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 7 Helpful 1
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      • If your software permits, turn off any play through function. If you do not, you will create an out-of-control echo that could damage your speakers, ears, and your relationship with your neighbors.
        Thanks
        Helpful 0 Not Helpful 0
      • Thanks to the RIAA, Microsoft Sound Recorder will only record up to 60 seconds of sound.
        Thanks
        Helpful 0 Not Helpful 0
      • To monitor the sound you're recording with the hardware methods above, use a single-to-double stereo adapter on the output port, then plug a single-to-single stereo cable from one side of the adapter to the input port, and a pair of headphones into the second side of the adapter, so you can monitor what you're recording.
        Thanks
        Helpful 0 Not Helpful 0
      Show More Tips
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • Do not use this method to violate copyright laws by stealing music from the internet or ripping music from a DVD to create a soundtrack to distribute to people.
        Thanks
        Helpful 0 Not Helpful 1
      • Copyright or web site restrictions may prevent you recording or distributing material. Check first.
        Thanks
        Helpful 0 Not Helpful 1
      Advertisement

      You Might Also Like

      2 Ways to Alter the Size of Your Windows Desktop Taskbar
      How to
      Turn Off the Android Dialpad Sounds
      4 Simple Ways to Find Out What Graphics Card You Have
      How to
      Change a Graphics Card
      10 Simple Steps to Install Two Video Cards on a Computer
      How to
      Build a Circuit Board
      How to
      Add a Sound Device to a Computer
      How to
      Install a Wireless Card
      How to
      Detect a Sound Card
      Easy Steps to Install a Sound Card
      Advertisement

      References

      1. http://manual.audacityteam.org/help/manual/man/tutorial_recording_computer_playback_on_windows.html

      About This Article

      In other languages
      Thanks to all authors for creating a page that has been read 434,895 times.

      Is this article up to date?

      Advertisement