PDF download Download Article PDF download Download Article

Under ideal conditions, you should be seeking to change your oil every three months or 3,000 miles (4,800 km). If you are driving around in high temperature conditions or dusty, you can even replace the oil more often than that. The process is very simple, as long as one, two or three simple.

Get Car Support Solve Any Problem

wH
Hi there! Do you have a question about how to diagnose or fix a problem with your car? I’ve read the manual so you don’t have to. Select your make, model, and year, then ask away!
*
*
  1. Get oil and a filter replacement.
  2. Get together a jack, a socket set and oil.
    • Park on a flat surface, or, if your car has a low clearance, use jack slopes or set it up. If you choose to support the car, use two jacks, rather than a slope. [1] (An additional jack costs about US $ 20, this is a very small price and guarantees you'll avoid a serious over-balance and a car crushing your face).
    Advertisement
  3. This will oil the drain plug more easily. You might want to check the weight of your car's oil and oil-filter manually you need to use. [2]
  4. Crawl under, and find the engine oil screw near the front. Where you plug in the socket, use the wrench to loosen the plug in a counterclockwise direction. Once relaxed, you can use your hand and remove the plug. The hot oil will begin to pour out. Ensure that all the old oil goes into the pan. Once it is completely discharged, wipe the screw and plug opening. [3]
  5. They are usually found in the side of the engine. Filter off any of the oil sump.
    • Remove the oil filter (use gloves if it is too hot) and wipe clean the filter area, especially when it is installed in the engine. [4]
    • Dab rubber seal on your new oil filter, and then twist it with your hands. You don't have to use the wrench to tighten the oil filter. [5]
  6. Remove the filler cap above the engine of the car. Position the funnel at the opening point. Check the correct oil capacity in your car's manual, but typically, you will need to pour four to five quarts of oil. After it's full, put back to the filler cap. [6]
  7. Check the dipstick. If you need, add more oil. [7] Now check near the oil drain and plug any leaks. If you find leaks, simply screw in the plugs or the oil filter. You're done.
  8. Carefully wipe excess oil, old oil into a plastic container, and then deal with it. Don't just pour in any place, however. It is better to bring it to a recycling center or other authorized locations. [8]
  9. Advertisement

Community Q&A

Search
Add New Question
  • Question
    Can the oil be drained by removing the oil filter and starting the car?
    Community Answer
    I would not do this! It will drain the oil, but your engine will be running without any, potentially causing major damage.
  • Question
    Can I change an oil plug without changing the oil?
    Community Answer
    Yes, if the oil is completely viable (pretty darn new) you could drain it into a CLEAN container and then pour it back in after you have switched the drain plug.
  • Question
    My drain plug is so tight it won't come out. Can I use breaker bar with a six point socket?
    Community Answer
    Yes, just be careful that you are going the right direction, counter-clockwise, and make sure it is the correct socket size so it won’t strip the bolt head.
Ask a Question
      Advertisement

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Thanks for submitting a tip for review!

      About This Article

      Thanks to all authors for creating a page that has been read 129,267 times.

      Did this article help you?

      Advertisement