How to Install New Cabinet Hinges for Your Kitchen or Bathroom

PDF download Download Article
Save money and upgrade old hardware with this hands-on how-to
PDF download Download Article

Replacing your old or worn-out cabinet hinges can instantly enhance your kitchen’s aesthetic. Whether you’re looking to replace your old hinges with a similar set or put soft-close or hidden hinges on your traditional cabinets, you’re in the right place. In this beginner-friendly guide, we interviewed DIY home improvement specialist Mike Katona to learn how you can remove the old hinges and install the new ones.

Things You Should Know

  • Unscrew the old hinges from the cabinet frame and remove the door. Place the door on a flat surface and remove the hardware.
  • Screw the same type of hinge into the door. Have a partner hold the door up to the cabinet frame and use a screwdriver to screw the hinge into the old holes.
  • If the new hinge doesn’t line up with the old holes, use a combination square to align the hinge. Mark the screw holes, drill pilot holes, and screw in the hinge.
Method 1
Method 1 of 3:

Removing the Old Hinges

PDF download Download Article
  1. {"smallUrl":"https:\/\/www.wikihow.com\/images\/thumb\/0\/04\/Replace-Cabinet-Hinges-Step-1.jpg\/v4-460px-Replace-Cabinet-Hinges-Step-1.jpg","bigUrl":"\/images\/thumb\/0\/04\/Replace-Cabinet-Hinges-Step-1.jpg\/v4-728px-Replace-Cabinet-Hinges-Step-1.jpg","smallWidth":460,"smallHeight":306,"bigWidth":728,"bigHeight":485,"licensing":"<div class=\"mw-parser-output\"><p>License: <a target=\"_blank\" rel=\"nofollow noreferrer noopener\" class=\"external text\" href=\"https:\/\/creativecommons.org\/licenses\/by-nc-sa\/2.5\/\">Creative Commons<\/a><br>\n<\/p><p><br \/>\n<\/p><\/div>"}
    While removing the screws, DIY home improvement specialist Mike Katona advises, “support the cabinet door to ensure it does not fall and get damaged.” [1] While supporting the cabinet door, use a drill fitted with a screwdriver bit to unscrew the bottom hinge, and then the top hinge.
    • Some hinges have release levers that allow you to remove the door without using tools. Starting with the bottom hinge, press the lever to separate the door from the cabinet frame. [2]
  2. {"smallUrl":"https:\/\/www.wikihow.com\/images\/thumb\/3\/38\/Replace-Cabinet-Hinges-Step-3.jpg\/v4-460px-Replace-Cabinet-Hinges-Step-3.jpg","bigUrl":"\/images\/thumb\/3\/38\/Replace-Cabinet-Hinges-Step-3.jpg\/v4-728px-Replace-Cabinet-Hinges-Step-3.jpg","smallWidth":460,"smallHeight":306,"bigWidth":728,"bigHeight":485,"licensing":"<div class=\"mw-parser-output\"><p>License: <a target=\"_blank\" rel=\"nofollow noreferrer noopener\" class=\"external text\" href=\"https:\/\/creativecommons.org\/licenses\/by-nc-sa\/2.5\/\">Creative Commons<\/a><br>\n<\/p><p><br \/>\n<\/p><\/div>"}
    Next, DIY home improvement specialist Mike Katona says to “take your cabinet door, place it on a flat surface, and remove the screws attaching the hardware to the door.” [3] You can remove the screws using a screwdriver or a drill fitted with a screwdriver bit.
    • If your hinges are painted over, use a razor blade to gently score around the outside of the hinge so you can remove it without damaging the paint on the door or frame. [4]
    • While you have the doors off, remove any knobs or handles you’d like to replace at the same time. You can also clean the cabinet door, repaint it, or re-glue any loose laminate.
    3. Advertisement
Method 2
Method 2 of 3:

Replacing the Old Hinges with the Same Type of Hinge

PDF download Download Article
  1. {"smallUrl":"https:\/\/www.wikihow.com\/images\/thumb\/8\/88\/Replace-Cabinet-Hinges-Step-5.jpg\/v4-460px-Replace-Cabinet-Hinges-Step-5.jpg","bigUrl":"\/images\/thumb\/8\/88\/Replace-Cabinet-Hinges-Step-5.jpg\/v4-728px-Replace-Cabinet-Hinges-Step-5.jpg","smallWidth":460,"smallHeight":306,"bigWidth":728,"bigHeight":485,"licensing":"<div class=\"mw-parser-output\"><p>License: <a target=\"_blank\" rel=\"nofollow noreferrer noopener\" class=\"external text\" href=\"https:\/\/creativecommons.org\/licenses\/by-nc-sa\/2.5\/\">Creative Commons<\/a><br>\n<\/p><p><br \/>\n<\/p><\/div>"}
    DIY home improvement specialist Mike Katona says that if you’re updating the hinges on an old cabinet, “it’s typically best to find a hinge that is mounted the same way and has mounting holes and screws in the same places. This will allow you to update your hardware without having to drill new holes, patch old holes, and repaint.” [5]
    • If possible, identify the brand of the old hinge and try to replace the hardware with that same brand. [6]
    • To make sure the new hinge matches the old one exactly, lay both side-by-side to see if the screw holes are the same distance apart.
    • If you’re buying hinges online or you’d like to be sure they match, measure the dimensions of the old hinge and find a new hinge with the same length, height, and thickness.
  2. {"smallUrl":"https:\/\/www.wikihow.com\/images\/thumb\/1\/19\/Replace-Cabinet-Hinges-Step-7.jpg\/v4-460px-Replace-Cabinet-Hinges-Step-7.jpg","bigUrl":"\/images\/thumb\/1\/19\/Replace-Cabinet-Hinges-Step-7.jpg\/v4-728px-Replace-Cabinet-Hinges-Step-7.jpg","smallWidth":460,"smallHeight":306,"bigWidth":728,"bigHeight":485,"licensing":"<div class=\"mw-parser-output\"><p>License: <a target=\"_blank\" rel=\"nofollow noreferrer noopener\" class=\"external text\" href=\"https:\/\/creativecommons.org\/licenses\/by-nc-sa\/2.5\/\">Creative Commons<\/a><br>\n<\/p><p><br \/>\n<\/p><\/div>"}
    If the new screw holes don’t line up completely, use a combination square to line up the hinge squarely with the bottom and side of the door. Mark where the holes are, then use a drill bit that’s slightly smaller than your screw to drill pilot holes. Use a screwdriver to screw in the hinge. [7]
  3. {"smallUrl":"https:\/\/www.wikihow.com\/images\/thumb\/1\/19\/Replace-Cabinet-Hinges-Step-7.jpg\/v4-460px-Replace-Cabinet-Hinges-Step-7.jpg","bigUrl":"\/images\/thumb\/1\/19\/Replace-Cabinet-Hinges-Step-7.jpg\/v4-728px-Replace-Cabinet-Hinges-Step-7.jpg","smallWidth":460,"smallHeight":306,"bigWidth":728,"bigHeight":485,"licensing":"<div class=\"mw-parser-output\"><p>License: <a target=\"_blank\" rel=\"nofollow noreferrer noopener\" class=\"external text\" href=\"https:\/\/creativecommons.org\/licenses\/by-nc-sa\/2.5\/\">Creative Commons<\/a><br>\n<\/p><p><br \/>\n<\/p><\/div>"}
    Ask an assistant to hold the door up against the frame. Set the new hinges over the holes for the old hinges in the cabinet frame and screw them in. [9]
    • This method can also work if you’re upgrading the same kind of hinge to a soft-close version. [10]
    4. Advertisement
Method 3
Method 3 of 3:

Replacing the Old Hinges with a Different Type of Hinge

PDF download Download Article
  1. {"smallUrl":"https:\/\/www.wikihow.com\/images\/thumb\/1\/1b\/Replace-Cabinet-Hinges-Step-11.jpg\/v4-460px-Replace-Cabinet-Hinges-Step-11.jpg","bigUrl":"\/images\/thumb\/1\/1b\/Replace-Cabinet-Hinges-Step-11.jpg\/v4-728px-Replace-Cabinet-Hinges-Step-11.jpg","smallWidth":460,"smallHeight":306,"bigWidth":728,"bigHeight":485,"licensing":"<div class=\"mw-parser-output\"><p>License: <a target=\"_blank\" rel=\"nofollow noreferrer noopener\" class=\"external text\" href=\"https:\/\/creativecommons.org\/licenses\/by-nc-sa\/2.5\/\">Creative Commons<\/a><br>\n<\/p><p><br \/>\n<\/p><\/div>"}
    Face frame cabinets have a lip around the opening of the cabinet, while frameless cabinets do not. Concealed and inset-mount hinges require drilling a hole into the door to mount them, while semi-concealed and exposed hinges just screw into the frame and door. [11]
      • Concealed hinges: These are installed on frameless cabinets on the inside of the door and cabinet frame, and no part of the hinge can be seen when the door is closed.
      • Inset-mount hinges: Inset (or overlay) mount hinges are recessed into the door, allowing it to lay flush against the face of the cabinet.
      • Semi-concealed hinges: These hinges can only be seen at the door joint. These are usually found on face-frame cabinets and their sizes might vary based on the size of the cabinet.
      • Exposed or traditional hinges: These hinges can be fully seen and are installed on the outside of inset or overlay cabinets.
    • Overlay doors sit on top of the opening and cover up the face frame or cabinet edges. Inset doors are mounted inside the face frame opening with a small gap around them.
      • To measure the cabinet’s overlay, put a piece of tape along the edge of the closed doors. Open the door and measure the distance between the cabinet opening and the tape.
  2. {"smallUrl":"https:\/\/www.wikihow.com\/images\/thumb\/b\/b5\/Replace-Cabinet-Hinges-Step-7-Version-2.jpg\/v4-460px-Replace-Cabinet-Hinges-Step-7-Version-2.jpg","bigUrl":"\/images\/thumb\/b\/b5\/Replace-Cabinet-Hinges-Step-7-Version-2.jpg\/v4-728px-Replace-Cabinet-Hinges-Step-7-Version-2.jpg","smallWidth":460,"smallHeight":345,"bigWidth":728,"bigHeight":546,"licensing":"<div class=\"mw-parser-output\"><p>\u00a9 2024 wikiHow, Inc. All rights reserved. wikiHow, Inc. is the copyright holder of this image under U.S. and international copyright laws. This image is <b>not<\/b> licensed under the Creative Commons license applied to text content and some other images posted to the wikiHow website. This image may not be used by other entities without the express written consent of wikiHow, Inc.<br>\n<\/p><p><br \/>\n<\/p><\/div>"}
    Fill the old screw holes in the door and frame with wood putty . Once the putty dries, paint the door and frame if necessary. Allow both surfaces to dry completely before installing the new hinges.
  3. {"smallUrl":"https:\/\/www.wikihow.com\/images\/thumb\/7\/79\/Replace-Cabinet-Hinges-Step-14.jpg\/v4-460px-Replace-Cabinet-Hinges-Step-14.jpg","bigUrl":"\/images\/thumb\/7\/79\/Replace-Cabinet-Hinges-Step-14.jpg\/v4-728px-Replace-Cabinet-Hinges-Step-14.jpg","smallWidth":460,"smallHeight":306,"bigWidth":728,"bigHeight":485,"licensing":"<div class=\"mw-parser-output\"><p>License: <a target=\"_blank\" rel=\"nofollow noreferrer noopener\" class=\"external text\" href=\"https:\/\/creativecommons.org\/licenses\/by-nc-sa\/2.5\/\">Creative Commons<\/a><br>\n<\/p><p><br \/>\n<\/p><\/div>"}
    Measure the distance between the top of the door and the hinge, then mark the top of the hinge with a pencil. [12] Measure the distance between the side of the door and the hinge and make a mark at the edge of the hinge. Position the hinge within both lines.
    • Concealed or inset hinges: Follow the hinge’s instructions to mark where the hole should be on the cabinet door. Use a hole saw with the same-sized bit to cut out the hole. [13]
      • Drill into the cabinet door with the hole saw until the hinge fits flush into the door. [14]
    • Exposed or traditional hinges: Depending on the brand, you may have to use a chisel to cut a recess inside the two lines you marked in this step for the hinge to fit. [15]
  4. {"smallUrl":"https:\/\/www.wikihow.com\/images\/thumb\/f\/fd\/Replace-Cabinet-Hinges-Step-16.jpg\/v4-460px-Replace-Cabinet-Hinges-Step-16.jpg","bigUrl":"\/images\/thumb\/f\/fd\/Replace-Cabinet-Hinges-Step-16.jpg\/v4-728px-Replace-Cabinet-Hinges-Step-16.jpg","smallWidth":460,"smallHeight":306,"bigWidth":728,"bigHeight":485,"licensing":"<div class=\"mw-parser-output\"><p>License: <a target=\"_blank\" rel=\"nofollow noreferrer noopener\" class=\"external text\" href=\"https:\/\/creativecommons.org\/licenses\/by-nc-sa\/2.5\/\">Creative Commons<\/a><br>\n<\/p><p><br \/>\n<\/p><\/div>"}
    Check to make sure the hinge is aligned with the side and top of the cabinet door with a combination square. [16] Mark each hole with a pencil, then remove the hinge and drill pilot holes . Use a screwdriver to attach the new hinges to the cabinet door.
    • Concealed or inset hinges: With the hinge inside the circular hole you cut out, mark the screw holes. Remove the hinge, then drill pilot holes, replace the hinge, and screw it in. [17]
    • Place a piece of painter’s tape on your drill at the length of the new screw so you can drill an appropriately-sized hole.
    • Before drilling a pilot hole, consider creating an “X” with painter’s tape over the location for your screw to reinforce the wood and protect against cracking. [18]
  5. {"smallUrl":"https:\/\/www.wikihow.com\/images\/thumb\/c\/c4\/Replace-Cabinet-Hinges-Step-10-Version-2.jpg\/v4-460px-Replace-Cabinet-Hinges-Step-10-Version-2.jpg","bigUrl":"\/images\/thumb\/c\/c4\/Replace-Cabinet-Hinges-Step-10-Version-2.jpg\/v4-728px-Replace-Cabinet-Hinges-Step-10-Version-2.jpg","smallWidth":460,"smallHeight":345,"bigWidth":728,"bigHeight":546,"licensing":"<div class=\"mw-parser-output\"><p>\u00a9 2024 wikiHow, Inc. All rights reserved. wikiHow, Inc. is the copyright holder of this image under U.S. and international copyright laws. This image is <b>not<\/b> licensed under the Creative Commons license applied to text content and some other images posted to the wikiHow website. This image may not be used by other entities without the express written consent of wikiHow, Inc.<br>\n<\/p><p><br \/>\n<\/p><\/div>"}
    Consult your hinge’s instructions to see how far the edge of the hinge should be from the edge of the cabinet frame. Use a pencil and a straightedge to draw a line down the frame, where the edge of the hinge should line up with the edge of the cabinet. [19]
    • You can find how far the cabinet hinge should be from the edge of the frame in the manufacturer’s instructions.
  6. {"smallUrl":"https:\/\/www.wikihow.com\/images\/thumb\/a\/a4\/Replace-Cabinet-Hinges-Step-21.jpg\/v4-460px-Replace-Cabinet-Hinges-Step-21.jpg","bigUrl":"\/images\/thumb\/a\/a4\/Replace-Cabinet-Hinges-Step-21.jpg\/v4-728px-Replace-Cabinet-Hinges-Step-21.jpg","smallWidth":460,"smallHeight":306,"bigWidth":728,"bigHeight":485,"licensing":"<div class=\"mw-parser-output\"><p>License: <a target=\"_blank\" rel=\"nofollow noreferrer noopener\" class=\"external text\" href=\"https:\/\/creativecommons.org\/licenses\/by-nc-sa\/2.5\/\">Creative Commons<\/a><br>\n<\/p><p><br \/>\n<\/p><\/div>"}
    Have a partner align the cabinet door against the frame so that the door evenly covers the hole. Use a level or combination square to make sure the door is perfectly level and square with the frame. Mark each hole in the the hinge with a pencil, then put the door down and drill pilot holes. [20]
    • Concealed or inset hinges: Some brands allow you to detach each side so you can screw in one side on the cabinet frame and the other on the door. Once both sides are installed, just click the hinges into place. [21]
      • Some also allow you to adjust the length and width of the hinge by tightening or loosening the screws on top of the hinge until the door aligns with the cabinet frame. [22]
  7. {"smallUrl":"https:\/\/www.wikihow.com\/images\/thumb\/2\/2d\/Replace-Cabinet-Hinges-Step-22.jpg\/v4-460px-Replace-Cabinet-Hinges-Step-22.jpg","bigUrl":"\/images\/thumb\/2\/2d\/Replace-Cabinet-Hinges-Step-22.jpg\/v4-728px-Replace-Cabinet-Hinges-Step-22.jpg","smallWidth":460,"smallHeight":306,"bigWidth":728,"bigHeight":485,"licensing":"<div class=\"mw-parser-output\"><p>License: <a target=\"_blank\" rel=\"nofollow noreferrer noopener\" class=\"external text\" href=\"https:\/\/creativecommons.org\/licenses\/by-nc-sa\/2.5\/\">Creative Commons<\/a><br>\n<\/p><p><br \/>\n<\/p><\/div>"}
    Align the hinges in the door with the holes you drilled in the frame. Screw the hinges into the frame half-way to make sure they line up correctly. If they don’t, remove the doors and correct your measurements. When the door and frame line up, tighten the screws. [23]
    • Open and close the door to make sure that the new hinges are positioned correctly on both doors. [24]
    8. Advertisement

Community Q&A

Search
Add New Question
  • Question
    My new hinges came with plastic on the screws. I don't have holes for the plastic, and need to take it off. What can I do?
    Community Answer
    Try using a pair of pliers on the plastic and a screw driver on the screw. Turn screw counterclockwise to remove. Repeat for each screw.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 1 Helpful 1
  • Question
    I want to replace with wider openings of the same type. Can I use the existing holes and screw sites?
    Cc_046
    Community Answer
    Depending on the size of your hinges, the original screw sites may or may not line up. Make sure that your screws are the appropriate thickness for the original hole, and maybe ask your local retailer for advice.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 2 Helpful 2
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      • If you’re replacing the hinges on multiple doors, build a custom L-shaped jig with two pieces of scrap wood that matches each corner of the cabinet door with the holes drilled all the way through. [25]
        Thanks
      • In addition to switching out your hinges, change the kitchen cabinet door pulls.
        Thanks
      • Make sure to mark your cabinet doors with post-it notes so that you place the doors in the proper location when you replace them.
        Thanks
      Show More Tips
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Things You'll Need


      You Might Also Like

      A Beginner’s Guide to Cabinet Making
      How to
      Install a Closet Rod
      How to Fix Broken Cabinet Hinges: 6 Quick Solutions
      How to
      Measure Cabinet Hinges
      How to Adjust & Reposition Euro-Style Cabinet Hinges
      Are Cabinets & Cupboards the Same Thing?
      How to
      Put a Closet Door Back on the Track
      How to
      Extend Cabinets to the Ceiling
      How to
      Measure Kitchen Cabinets
      How to
      Whitewash Cabinets
      How to
      Hang Wall Cabinets
      How to
      Hang a Dartboard Cabinet
      How to
      Measure Drawer Slides
      How to
      Make Cabinet Doors
      Advertisement

      Expert Interview

      Thanks for reading our article! If you’d like to learn more about home improvement, check out our in-depth interview with Mike Katona .

      References

      1. ↑ Mike Katona. DIY Home Improvement Specialist. Expert Interview. 25 August 2021.
      2. ↑ https://static.nhtsa.gov/odi/tsbs/2019/MC-10159466-0001.pdf
      3. ↑ Mike Katona. DIY Home Improvement Specialist. Expert Interview. 25 August 2021.
      4. ↑ https://youtu.be/xJRTWQokaSI?t=61
      5. ↑ Mike Katona. DIY Home Improvement Specialist. Expert Interview. 25 August 2021.
      6. ↑ https://www.thisoldhouse.com/kitchens/21016280/how-to-upgrade-to-soft-close-cabinets
      7. ↑ https://www.thisoldhouse.com/kitchens/21016280/how-to-upgrade-to-soft-close-cabinets
      8. ↑ Mike Katona. DIY Home Improvement Specialist. Expert Interview. 25 August 2021.
      9. ↑ https://www.thisoldhouse.com/kitchens/21016280/how-to-upgrade-to-soft-close-cabinets
      1. ↑ https://www.thisoldhouse.com/kitchens/21016280/how-to-upgrade-to-soft-close-cabinets
      2. ↑ https://www.thehandymansdaughter.com/cabinet-hinge-types/
      3. ↑ https://www.thehandymansdaughter.com/install-cabinet-hinges/
      4. ↑ https://youtu.be/-uOoEQ04o4k?t=847
      5. ↑ https://youtu.be/-uOoEQ04o4k?t=865
      6. ↑ https://www.thehandymansdaughter.com/cabinet-hinge-types/
      7. ↑ https://www.thisoldhouse.com/cabinets/21016567/how-to-install-concealed-cabinet-hinges
      8. ↑ https://images.thdstatic.com/catalog/pdfImages/f6/f6a2f24b-0ed4-488a-939b-b11eb3e3af3c.pdf
      9. ↑ https://www.bobvila.com/articles/pilot-holes/
      10. ↑ https://youtu.be/-uOoEQ04o4k?t=788
      11. ↑ https://youtu.be/-uOoEQ04o4k?t=953
      12. ↑ https://www.thisoldhouse.com/cabinets/21016567/how-to-install-concealed-cabinet-hinges
      13. ↑ https://youtu.be/-uOoEQ04o4k?t=1020
      14. ↑ https://youtu.be/-uOoEQ04o4k?t=957
      15. ↑ https://www.thisoldhouse.com/cabinets/21016567/how-to-install-concealed-cabinet-hinges
      16. ↑ https://www.thisoldhouse.com/cabinets/23518705/cabinet-hardware-installation

      About This Article

      In other languages
      Thanks to all authors for creating a page that has been read 120,576 times.
      If you buy through links on our site, we may earn a commission .

      Did this article help you?

      Advertisement