PDF download Download Article PDF download Download Article

Sometimes, skateboard bearings need more than cleaning. Bearings can get rusted or pitted beyond repair, and when that happens there’s no real solution beyond replacing them. Luckily, replacing your bearings is one of the easier (and more satisfying) skateboard projects. In this article, we’ll break down everything you’ll need to do in order to install some fresh bearings so you can get back on the board.

1

Purchase replacement bearings.

PDF download Download Article
  1. Your local skateboard shop should be able to help if you don’t know what kind of bearings you’d need.
  2. Advertisement
2

Take the wheels off.

PDF download Download Article
  1. Put the two washers and nut from the wheel in a bag or other small container so you do not lose them. [1]
3

Put the first bearing on the axle.

PDF download Download Article
  1. [2]
  2. Advertisement
4

Pry the bearing off.

PDF download Download Article
  1. If you're going to throw the bearings away anyway, you don't need to be too delicate with them, but try not to damage the wheel in the process. [3]
5

Repeat this process on the other wheels.

PDF download Download Article
  1. Advertisement
6

Slide the bearings into place.

PDF download Download Article
  1. Go for whatever makes this easier for you when it comes to attaching the bearings. [4]
7

Put the wheel on the truck.

PDF download Download Article
  1. Put the wheel onto the truck of the skateboard and press down on the wheel to press the bearing into place.
  2. Advertisement
8

Install the spacer.

PDF download Download Article
  1. [5]
9

Slide the bearing on.

PDF download Download Article
  1. Advertisement
10

Repeat this process for the other wheels.

PDF download Download Article
11

Swap out the washers and nuts.

PDF download Download Article
  1. The wheels should rotate without the bearing jiggling or providing friction.
  2. Advertisement
12

Go skateboarding.

PDF download Download Article
  1. With your bearings replaced, your wheels should feel brand new now.


Community Q&A

Search
Add New Question
  • Question
    What tool do I use to pry the bearings out?
    Community Answer
    Put the wheel on the truck axle, and pull the wheel at an angle until the bearing comes out.
  • Question
    Do I need to have a spacer in-between the bearings?
    Community Answer
    Some wheels have a molded integrated spacer, some require a separate piece.
Ask a Question
      Advertisement

      Tips

      • Work slowly to avoid damaging the parts of your skateboard that you're not replacing.
      • Clean your bearing using bones cleaning solution or other solvents (avoid water based) to avoid rusted bearings.
      • Lubricate your bearing every so often with bones speed cream or other alternatives to prevent damage from friction.
      Show More Tips
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Thanks for submitting a tip for review!
      Advertisement

      Things You'll Need

      • Bearings
      • Ratchet/skate tool

      Expert Interview

      Thanks for reading our article! If you’d like to learn more about skateboarding, check out our in-depth interview with Jon Depoian .

      About This Article

      Thanks to all authors for creating a page that has been read 127,543 times.

      Did this article help you?

      Advertisement