Download Article
An in-depth guide to performing a factory reset on Android smartphones
Download Article
Factory resetting an Android phone will delete all your data, including your contacts, photos, apps, and more. If you don't want to delete everything, you must back up your device before proceeding. A hard reset can be helpful if you're giving the phone away or if you want to start with a clean device. This wikiHow will show you how to reset your Android device to its default settings using factory reset and recovery mode.
Things You Should Know
- On newer devices, go to "Settings" → "Backup and reset" → "Erase all data (factory reset)" → "Erase data" → "Erase data".
- On older devices, go to "Settings" → "Backup & reset" → "Factory data reset" → "Reset Phone". Enter your passcode and tap "Erase everything".
- Always backup your device before factory resetting. All data will be permanently erased.
Steps
-
Open the Settings app . This is the gear icon.
- A factory reset will erase all your data from your phone. It's recommended to back up your device before proceeding. [1] X Research source
-
Tap Backup and reset . On newer versions of Android, you may need to tap Additional settings first.
- On Samsung Galaxy devices, tap General Management , and then Reset .
Advertisement -
Tap Erase all data (factory reset) . A pop-up menu will open.
-
Tap Erase data . Again, this will reset all your data on your device. This includes apps, photos, contacts, and SD card files .
-
Tap Erase data again. This will confirm your decision.
- Your phone will begin to reset. This process can take up to 10 minutes, depending on the amount of data in your device.
Advertisement
-
Open the Settings app . This is the gear icon.
- Use this method if you have an Android older than version 5.0. If needed, you can check your Android version .
-
Scroll down and tap Backup & reset . It's in either the Personal or Privacy section of the menu, depending on device and Android version.
- If you are on a Samsung Galaxy device, instead tap General Management and then tap Reset .
-
Tap Factory data reset . It's at the bottom of the menu.
-
Tap Reset Phone . Once the reset process is complete, your phone will be formatted as it was when it left the factory.
- If you are on a Samsung Galaxy device, instead tap Reset .
-
Enter your screen lock passcode. If your phone has a screen lock enabled, you will be asked to enter your phone's pattern, PIN, or passcode.
-
Tap Erase everything to confirm. This will immediately erase all of the phone's data and reboots to the factory default settings and configuration. The process can take several minutes.
- If you are on a Samsung Galaxy device, instead tap Delete All .
Advertisement
-
Power off your device. Use the power button or Accessibility menu to turn off your device.
- A factory reset will erase all your data from your phone. To reset without losing data , make sure to back up your device.
-
Boot your phone in Recovery Mode . With your device powered off, press and hold the device-specific button combination. The buttons will vary from device to device.
- Most devices use Volume Up and Power. Some devices with physical user interfaces may use the Power and Home buttons.
- Samsung devices : Hold Volume Up, Home, and Power at the same time.
- Google Pixel : Hold Volume Down and Power at the same time. When you see the Android logo, press and hold the Power key, and then press the Volume Up key once.
-
Select a language. Use the Volume buttons to scroll up and down, and use the Power button to confirm.
-
Select Wipe data . Use the Volume buttons to scroll up and down, and use the Power button to confirm.
- On some devices, this will look like Wipe data/factory reset . If you see this, select it. Then, select Yes to confirm your selection.
-
Select Format data . This is the factory reset option.
-
Enter the verification code. Use the keypad to enter the code on the screen.
-
Tap Format . You'll see a confirmation prompt.
- The device will begin erasing the data.
Advertisement
Community Q&A
Search
-
QuestionWhat can I do if my phone will not turn on?Community AnswerIf it's stuck on the logo screen, then it could be that your phone is soft-bricked. To restore your phone, search for your model online, then flash stock firmware.
-
QuestionI only want to save my photos. How can I save them and do a factory reset?Community AnswerIf your phone has an SD card slot, you can copy your photos to an SD card. Data on an SD card is not touched during a factory reset. If you can't use an SD card, you can always plug your phone into your computer and transfer your photos to it over USB. Finally, there's cloud storage. If you upload all your photos to Google Photos, Facebook, or Dropbox before doing a factory reset, they will be safely stored online for later download.
-
QuestionHow can I use the software of my Android phone if it is corrupted?Community AnswerYou can't, you can't use corrupted software. Re-download the software or find alternatives.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Warnings
- Backup your data before resetting the device.Thanks
- Different Android OS-based devices have slight user interface design differences.Thanks
Advertisement
About This Article
Article Summary
X
1. Open Settings
.
2. Tap Backup & reset
.
3. Tap Factory data reset
.
4. Tap Reset
.
5. Tap ERASE EVERYTHING
or DELETE ALL
.
Did this summary help you?
Thanks to all authors for creating a page that has been read 2,844,133 times.
Reader Success Stories
- "This article was a wonderful tool. Been trying so many other options mentioned on the net, but yours were a life saver. Thanks a million." ..." more
Advertisement