PDF download Download Article PDF download Download Article

If your car’s paint job is looking a little tired or worn-in, you might be thinking about repainting your car on your own. Sanding your car is a super important first step—without it, your new paint job probably won’t look silky and smooth. Set aside an afternoon and spend a few hours sanding your car for a new paint job that looks like it was done by a professional.

Things You Should Know

  • If the old paint on your car is solid and uncracked, you don't need to sand before repainting. Just add a coat of primer before applying the new paint.
  • If you do need to sand your car, use a power sander .
  • Go over your car once with 180-grit sandpaper, then again with 300-grit sandpaper.
  • Finally, wet sand your car with 1200-2000 grit sandpaper for a smooth finish.
Question 1 of 6:

Can you paint over existing auto paint without sanding?

PDF download Download Article
  1. You can go ahead and use a primer coat to cover your existing paint before adding your new color. The new paint will go on shiny and smooth, and you don’t have to worry about sanding anything down. [1]
    • This includes paint in the doorway and crevices of the car.
    • Unfortunately, you can't paint over existing paint that is cracked without sanding first. If any part of your paint is cracked, you’ll have to sand it off before doing a primer coat. [2]
  2. Advertisement
Question 2 of 6:

What’s the best method for sanding a car?

PDF download Download Article
  1. Sanding creates a lot of fine dust particles that can irritate your lungs, eyes, and skin. Before you start sanding, put on your protective equipment and keep it on until you’re finished.
    • If you’re worried about getting particles in your car or your home, wear overalls over your clothes, then take them off and wash them.
  2. Attach your sandpaper to the power sander and turn it on. Press it up against your car as hard as you can, and move it in small circles across the entire panel. [3]
    • Do your best to make even motions and to avoid staying in a certain pattern too long, or you might end up staying in a rut.
  3. You can separate the car into different panels: the doors, the roof, the hood, the trunk, the bumper, and the fender. In total, each panel will probably take about 2 hours to sand down completely. [4]
    • It might sound like a long time, but it’s totally worth it for a new, smooth paint job.
  4. Wipe your car off with a damp cloth before priming and painting. Sanding generates a lot of dust, which can get stuck in automotive paint and primer. Before you move on, use a damp cloth to wipe down the outside of your car. [5]
    • If you’re super worried about dust, use paint thinners to wipe down the outside of your car. Wait for the thinners to evaporate before you move onto priming.
  5. Advertisement
Question 3 of 6:

What kind of sander should you use to sand a car?

PDF download Download Article
  1. A power sander will be way easier to use than hand sanding your entire car. Use this tool on the large, flat surfaces of your vehicle, like the doors, roof, trunk, and hood. [6]
    • You can buy a power sander from most hardware stores for around $40.
  2. The corners of doors, underside of the body, and the small cracks in between door handles can be tough to reach with a power sander. Keep a few sheets of loose sandpaper around so you can sand down these areas by hand. [7]
    • To make hand sanding easier, staple a piece of sandpaper to a block of wood so it’s easier to hold onto.
  3. Advertisement
Question 4 of 6:

What grit sandpaper should you use to sand a car?

PDF download Download Article
  1. This will roughly take off the outermost layer of paint and primer. You might notice that it looks a little scratched and rough at this point, but that’s okay. [8]
  2. This sandpaper is a little smoother, and it will help remove some of the scratches that the previous sandpaper left behind. Your car won’t look perfect at this point, but that’s all right. [9]
  3. This will give your car the silky smooth finish that it needs for your new coat of paint. Soak your wet-to-dry sandpaper in water overnight, then use it like you normally would over your entire car. [10]
    • It’s super important to soak your wet-to-dry sandpaper before you use it. Using wet-to-dry sandpaper while it’s dry can scratch your car.
    • Using wet-to-dry sandpaper will give your car a smoother finish than typical sandpaper will.
  4. Advertisement
Question 5 of 6:

How much do you need to sand before repainting?

PDF download Download Article
  1. Most experts recommend sanding until you’ve removed both the paint and the primer from the car. This can take a long time, but the new coat of paint will go on much smoother if you do. [11] Obviously, the kind of sand and the quantity of sanding will depend on what exactly do you want to do with the car.
    • If you aren’t as worried about getting a smooth coat, you can sand down to the primer instead of the bare metal.
Question 6 of 6:

How do you deal with rust on your car?

PDF download Download Article
  1. You can hand sand or use a power sander, depending on where the rust is. Use your sandpaper to strip off the rust and the surrounding paint until you can see bare metal poking through. [12]
    • This method works well for surface rust, or rust that hasn’t penetrated all the way through the body of your car. If your car has holes in it from rust, take it to a professional.
  2. Put on a pair of rubber gloves and use a brush or a sponge to apply a thin layer of rust converter where the rust used to be. Wait 15 to 30 minutes for the product to dry, then add a second layer. Wait for the second layer to dry all the way before you start painting your car. [13]
    • Rust converters contain chemicals that react with the rust and convert it into a harmless compound that won’t hurt your car.
    • You can find rust converters at most auto body shops.
  3. Advertisement

Community Q&A

Search
Add New Question
  • Question
    How long after painting do I apply clear coat?
    Community Answer
    I usually paint onto a strip of scrap metal that's primed - that way I have another piece to touch and feel how the paint feels without touching the car. Once its dry, (about 24 hours), hit it with some super fine SP and spray it down with the clear coat.
  • Question
    how do you keep the paint from getting in the door jams?
    Wiliiam-james
    Community Answer
    To prevent paint from getting into door jams during vehicle painting, the process involves careful masking. Painters use masking tape and masking paper to cover the edges and openings of the door jams, ensuring they remain protected from overspray. The tape is applied precisely along the seam where the door meets the frame, and the masking paper is used to cover the rest of the door jam area, leaving no exposed surfaces. This meticulous masking technique ensures that the paint is applied only to the intended exterior surfaces, leaving the door jams clean and unpainted.
Ask a Question
      Advertisement

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      Advertisement

      About This Article

      Thanks to all authors for creating a page that has been read 155,569 times.

      Reader Success Stories

      • Brian Stacey

        Sep 13, 2017

        "Knowing the time between coats and how to prepare your car has given me more hope in the finished job. "
      Share your story

      Did this article help you?

      Advertisement