How to Set a Pool Timer

PDF download Download Article
Plus, the best pool pump schedule to keep your swimming water clean
PDF download Download Article

If you own a pool, a pool timer is an invaluable tool that lets you activate its pumps during specific times of the day. This can help you save money on power and keep your pool's chemical's healthy and balanced. If you're unsure of how to set and use a pool timer, don't worry—it's very simple!

Setting a Pool Timer at a Glance

  1. Open the timer box and pull the clock dial outward to the correct time of day.
  2. Attach the “On” (green) tripper to the time you want the pool equipment to turn on.
  3. Attach the “Off” (red) tripper to the time you want the equipment to stop working.
  4. Use the red override lever to manually start or stop your pool equipment.
Part 1
Part 1 of 2:

Setting Your Pump's Operating Time

PDF download Download Article
  1. Open your pool timer box and look for the clock dial—on most models, it's yellow in color with a small red or silver handle outstretching from it. On the clock-dial is a silver time pointer that points to the current time. [1]
    • Read your manufacturer's instructions to determine the parts of the dial.
  2. Grip the clock dial and gently pull it outward. Afterward, rotate the dial either clockwise or counterclockwise until the silver time pointer aligns with the time of day. [2]
    • Take note of the AM and PM times along the dial. For example, if it's 12 PM, rotate the clock dial until the silver time pointer aligns with 12 PM.
    Advertisement
  3. The trippers are clipped to the timer and determine when your pool equipment turns on and off. On most models, the "On" tipper is green and contains an "On" label. [3]
    • In some pool timer models, the "On" tripper is silver.
  4. After finding the "On" tripper, locate the time on the clock dial that you want your equipment to turn on. Now, hold the tripper to this time on the clock dial and tighten the screw on the tripper until it's firmly attached. [4]
    • If you want to set your pool equipment to turn on at 8 AM, attach the tripper to this spot on the clock dial.
    • Remember that the silver time point represents the current time and is separate from the tripper time.
  5. The "Off" tripper will determine when your pool equipment turns off. Typically, this tripper is gold and labeled with "Off." [5]
    • Some pool timer models have silver "Off" trippers.
  6. Once you find the "Off" tripper, locate the time on the clock dial that you want your pool equipment to turn off. Afterward, hold the tripper to this time and tighten its screw until it's firmly connected. [6]
    • If you want your pool equipment to turn off at 3 PM, connect the tripper to this time on the clock dial. If your "On" tripper is currently at 8 AM, that means your equipment will turn on at this time and off at 3 PM.
  7. The red lever extending from your clock dial can be used to do the opposite of your current setting. For example, if your timer is currently off and you want to turn it on, flip the lever to "On." Now, the timer will remain in this mode on until the silver time point reaches your "Off" tripper or you flip the red lever to "Off." [7]
    • Spray WD-40 behind the dial if your red override lever is hard to flip. If this doesn't work, you might have an insect infestation behind the time clock.
    8. Advertisement
Part 2
Part 2 of 2:

Using Your Timer to Optimize Your Pool Pump

PDF download Download Article
  1. of your pool. Before using your timer to optimize your pump, you need to determine that your pool's pH, alkalinity, and calcium hardness are 7.4 to 7.6, 100 to 150 ppm, and 150 to 400 ppm, respectively. Use water testing papers to check these values and adjust them as necessary. [8]
    • To raise your pool's pH, add sodium carbonate or sodium bicarbonate. To lower it, add muriatic acid or sodium bisulfate.
    • Add sodium bicarbonate to raise alkalinity and pH reducer or muriatic acid to lower it.
    • Add calcium chloride to raise calcium hardness and muriatic acid to lower it.
  2. In most cases, 12 hours a day is the minimum to keep your pool filter running. Depending on where you live, different times of day are most beneficial—contact your energy company and ask for optimal times. [9]
    • In most cases, 9 PM to 9 AM and the optimal times to run your pool filter since this is when people are using less energy.
  3. After letting your pump run for 12 hours, check its chemical balance again. If your pump is running for the proper amount of time, the levels should be the same. If they are less or more than the first test, record these differences.
    • Test your pool's chemical balance 1 to 3 times a week.
  4. In many cases, pool pump horsepower is more than necessary for pool size. If you find that your pump is pushing your pool water through in less time and causing lower chemical levels than required, remove 2 hours from your timer and run a chemical test again the next day. If it's causing higher chemical levels than required, add 2 hours and run a chemical test the next day. [10]
    • Keep checking your pool chemical balance and reduce or add time until you find the optimal runtime. Remember that optimal pump time can save you money on your energy bill.
    5. Advertisement

Video

Expert Q&A

Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      • Reset your timer clock at any time by pulling the yellow dial outward toward you to disengage it. Now, spin it in either direction to set the time with the center time pointer.
        Thanks
        Helpful 1 Not Helpful 1
      • If your time pointer is loose, tighten the screw holding it in place. If this still doesn’t work, you might need to replace the small spring located behind the screw if it's broken or rusted.
        Thanks
        Helpful 0 Not Helpful 0
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      Advertisement

      You Might Also Like

      How to
      Hook Up a Pool Vacuum
      How to
      Prime a Pool Pump
      How to
      Replace the Sand in Your Pool Filter
      How to
      Know How Many Hours to Run a Pool Filter
      How to
      Vacuum Your Pool and Backwash the Filter
      How to
      Clean a Cartridge Type Swimming Pool Filter
      How to
      Repair a Swimming Pool Vinyl Liner
      How to
      Select the Correct Filter Size for Your Swimming Pool
      Advertisement

      References

      1. ↑ https://youtu.be/ktVdkqJNQOE?t=44
      2. ↑ https://youtu.be/kbWpAIRtRIs?t=12
      3. ↑ https://youtu.be/kbWpAIRtRIs?t=12
      4. ↑ https://youtu.be/kbWpAIRtRIs?t=31
      5. ↑ https://youtu.be/kbWpAIRtRIs?t=12
      6. ↑ https://youtu.be/kbWpAIRtRIs?t=31
      7. ↑ https://youtu.be/ktVdkqJNQOE?t=44
      8. ↑ https://poolcareguy.com/pool-chemistry/
      9. ↑ https://youtu.be/568CtsNXgPM?t=73
      1. ↑ https://youtu.be/568CtsNXgPM?t=86

      About This Article

      Article Summary X

      To set the timer on your pool, start by locating it in the timer box. It will most likely look like a yellow circle with a pointer indicating the time. Pull out the dial and twist it to set it to the right time of day. Then, attach your "On" tripper, which will activate your filter, to the time on the clock when you want your equipment to turn on. Next, connect your "Off" tripper to the time you want to turn it off. If you want to override the setting you’ve made, flip the red lever on your dial, which will turn the equipment on if it’s currently off. For tips on how often to run your pool filter each day, keep reading!

      Did this summary help you?
      Thanks to all authors for creating a page that has been read 120,037 times.

      Did this article help you?

      Advertisement