Traeger is a brand of wood-burning grill popular among barbeque aficionados. Though the company offers a variety of different models, all Traeger grills use the same basic, easy to follow start up and shut down procedure.
Steps
-
Assemble your grill if necessary. If this is your first time starting a new Traeger grill, check to make sure that it is completely assembled. For most models, this involves putting together the lower cabinet, grill body, heat baffle, grease drain pan, flue pipe, chimney cap, grill grates, and grease bucket.
- Every Traeger grill is different, so follow the assembly instructions listed in your ownerโs manual.
- When igniting your grill for the first time, remove the grill grates, grease drain pan, and heat baffle. This will allow you to troubleshoot any initial start-up issues.
- You can also just hire someone to put the grill together for you.
-
Plug your grill into an electrical outlet. Unlike traditional wood-burning grills, Traeger equipment requires power to operate the internal thermostat, fan, igniter rod, and wood pellet auger. To avoid starting the grill accidentally, leave it unplugged when not in use. [1] X Research sourceAdvertisement
-
Purchase Traeger-brand wood pellets. To operate your grill, youโll need specially designed wood pellets available for purchase from Traegerโs official website. These wood pellets come in a variety of flavors, including hickory, mesquite, apple, pecan, oak, maple, alder, and cherry, and each type of pellet will make your food taste different. For safety, only use Traeger-brand wood pellets with your grill.
-
Place the wood pellets inside your grillโs hopper. Locate the large metal box attached to your grillโs main body, known as the hopper. Open the lid and, if necessary, scoop out any pellets already inside the hopper or remove them by opening your grillโs hopper cleanout door. Then, fill the chamber to the top with wood pellets. [2] X Research source
- You can use the same batch of wood pellets for up to 1 week.
-
Clean your RTD temperature probe if necessary. The RTD temperature probe is a metal prong located on the left side of your grillโs main body. Before starting up the grill, make sure the probe is free of grease, dirt, and other items that could cause it to operate incorrectly. If the prong is dirty, clean it off using a fresh rag.
- If your temperature probe is dirty, it may cause unwanted heat fluctuations while grilling.
-
Open up the grillโs lid and turn it on. When youโre ready to cook, open up the lid on your Traeger grill. Then, toggle the power switch located on your unitโs control panel to the โOnโ position. Your grill needs time to preheat, so donโt put anything on the cooking grates just yet. [3] X Research source
-
Turn the temperature dial to the โSmokeโ option. Look for a small temperature knob located on your grillโs control panel. Then, turn the knob to the setting labeled โSmoke.โ If your unit does not have a smoke option, set the temperature to between 160 ยฐF (71 ยฐC) and 200 ยฐF (93 ยฐC).
-
Let the grill sit for about 5 minutes. For most Traeger products, your grill will need between 4 and 5 minutes to preheat properly. If your grill comes equipped with Advanced Grilling Logic, it may take a minute or 2 less. During this time, watch the grill to make sure it starts up properly and doesnโt run into any technical issues. [4] X Research source
- For brand new units, add an extra 2 to 3 minutes to the preheating section. This will give the grillโs auger time to move your wood pellets to the fire box.
-
Close the lid when the grill starts to roar. Once the grill finishes preheating, youโll hear a loud, roaring noise emanate from the unitโs main body. This sound typically resembles the engine on a jet or a gale of wind. When you hear the noise, close the grillโs lid to pack in heat and smoke until youโre ready to cook.
-
Check your grillโs hotrod, fan, and auger if it wonโt start up. If your grill does not heat up or start to roar, there may be a problem with 1 of the component parts. Check your grillโs hotrod, fan, and auger to see if there is any debris or dust clogging everything up. If there is, clean out the area and try running your grill again. If it still doesnโt turn on, visit Traegerโs official FAQ webpage for support. [5] X Research source
- Look for your grillโs hotrod below the grill grate, drip tray, and heat baffle.
- You can find your grillโs fan and auger underneath the hopper.
-
Turn the temperature dial to your desired cooking level. With the grill preheated, youโre free to change the unitโs temperature knob from the smoke setting to whatever cooking level you desire. Before putting any food on the grill, check the heat gauge above the unitโs temperature knob to see if the chamber is hot enough.
- Traeger grills use numeric temperature levels and do not contain preset options for grilling, roasting, braising, and the like.
-
Take any remaining food off the grill. Leaving food on your grill grates may cause unwanted grime buildup or rust, things youโll have to clean off before you can cook again. To avoid this, take any food off your grill before you shut it down. [6] X Research source
- If any food remains stuck on the grill grates, clean it off after the unit cools down.
-
Set the temperature dial to the โShut Down Cycleโ option. Instead of a low temperature option, Traeger units come with a โshut down cycleโ setting that helps the unit turn off properly. To avoid damaging your grill, do not turn it off without first running the unit through a shut down cycle. [7] X Research source
-
Close the grillโs lid and let the unit sit for about 10 minutes. After activating the shut down cycle, close your grillโs lid and let it power down on its own. After about 10 minutes, your grill should automatically shut off. [8] X Research source
- Even after the unit turns off, be cautious around the grill grates in case any residual heat remains.
-
Toggle the power switch and unplug the grill. Once the grill shuts down, make sure to toggle the unitโs power switch to the โOffโ position. Then, unplug the unit from the wall to avoid accidentally turning it back on.
-
Clean the grill once it cools down. After each use, you should wipe down the grill grates with a fresh rag. About once a year, you should also clean up the grillโs smoke stack, grease drip pan, heat baffle, and main body.
Community Q&A
-
QuestionDoes the cook time on Traeger recipes include the smoking time? Recipe says smoke for 3 - 4 hours, total cook time 8 hours. So should it be 11 - 12 hours total?Community AnswerNo. Total time is 8 hours, of that 3 - 4 hours is smoke time.
-
QuestionThe knob on the smoker worked the first three times I used it. It won't move now. Why?saghir AlhufofCommunity AnswerThe most likely reason is that the knob is not properly attached to the mechanism it controls. This can happen if the knob is not screwed on tightly enough or if the threads are stripped. Another possibility is that something is blocking the movement of the knob, preventing it from turning.
-
QuestionHow long will the pellets last in the hopper?saghir AlhufofCommunity AnswerIt depends on how much you use your pellet grill and how often you refill the hopper. A full hopper will last anywhere from 6-8 hours of cooking time.
Video
Tips
Things Youโll Need
- Traeger grill
- Traeger-brand wood pellets
- Clean rag
- Extension cord (optional)
References
- โ https://www.traegergrills.com/how-it-works.html
- โ https://www.traeger.com/learn/changing-wood-pellets?srsltid=AfmBOoqZBy9SflASX5ICwoZ1py3R1h-fB-vCjulnMP84dmDyUSv8gqcf
- โ https://www.traegergrills.com/how-it-works.html
- โ https://www.traegergrills.com/how-it-works.html
- โ https://www.youtube.com/watch?v=geN_qM1mWp8&feature=youtu.be&t=9s
- โ https://www.youtube.com/watch?v=_C0knvEEjz4&feature=youtu.be&t=20s
- โ https://www.youtube.com/watch?v=_C0knvEEjz4&feature=youtu.be&t=23s
- โ https://www.youtube.com/watch?v=_C0knvEEjz4&feature=youtu.be&t=26s
About This Article
To start your Traeger grill properly, first assemble the unit and plug it into a power outlet. Before turning the grill on, fill the hopper chamber with Traeger-brand wood pellets and clean off the RTD temperature probe if it is dirty. Then, open the grillโs main chamber and toggle the unitโs power switch to the โOnโ position. Turn the grillโs temperature knob to the โSmokeโ setting, then let it sit for about 5 minutes. When the grill starts to roar, close the lid and set it to your desired cooking temperature. To learn how to shut down your Traeger grill, read on!
Reader Success Stories
- "It refreshed my memory as this is the second year I have the unit!"