PDF download Download Article PDF download Download Article

As vinyl and linoleum floors age, waxing helps maintain their shine and protect them from further wear, tears, and scratches. Wood, tile, and epoxy floors may also be waxed. Over time, the layers of wax start to build up, turn yellow with age, and can make the floor look dirty even after you just cleaned it. To remedy this, strip the old wax buildup before waxing again. Before stripping the wax buildup, remove furniture from the floors you’re cleaning, sweep up any loose debris, and mop to remove dirt.

Method 1
Method 1 of 3:

Removing Buildup From Vinyl and Tile Floors

PDF download Download Article
  1. Use a sponge mop to saturate your floor with a solution of 2 gallons (7.57 L) of hot water, 1 cup (240 mL) of non-bleaching powder dishwasher detergent and 2 cups (480 mL) of ammonia. Allow the solution to sit on the floor for a couple of minutes. Scrub gently using the scrubber edge of the mop or a scrub brush, then mop up any extra liquid. Go over the floor again with clear hot water, using your scrubber to remove any remaining wax. [1]
    • You may need to scrub corners and around baseboards by hand.
    • Dry the floor with old towels or rags.
  2. Combine ½ cup (120 mL) of ammonia with 2 gallons (7.57 L) of warm water. Use this solution to mop your vinyl or tile floor. Let it sit on the floor for at least ten minutes to eat through the wax buildup. Dry the floor with old towels.
    • Repeat the process if needed to completely remove the wax.
    • Use hot water to clean epoxy floors. Mix ½ cup (120 mL) of ammonia with 2 gallons (7.57 L) of hot water and mop with a hard foam mop. [2]
    Advertisement
  3. Mop your tile floor with a solution of ¾ cup (180 mL) of ammonia and 1 cup (240 mL) of laundry detergent and 1 gallon (3.785 L) of warm water. Allow the solution to sit on the floor for about ten minutes. Scrub the floor with a scrubbing sponge or stiff scrub brush. Rinse the solution from the floor with clean water. [3]
    • Dry with old towels or rags before applying new wax.
    • Try the same stripping method on your tile floors with a solution of 1 cup (240 mL) of white vinegar, 1 cup (240 mL) of ammonia, and 1 gallon (3.785 L) of warm water. [4]
  4. Pour club soda directly on a section of your floor. Scrub with a stiff scrub brush or scrubbing sponge. Let it soak into the floor for a few minutes, then wipe the floor dry.
  5. Buy a polish-stripper that is made for the type of stone you have. Apply a liberal amount of the polish-stripper to a section of the floor. Let it set for about 10 minutes, then scrub it vigorously with a wire brush. Wipe up the stripper with rags and mop the section of floor with clean water to remove any stripping product. Repeat this process until you have scrubbed and mopped the entire floor. [5]
    • You can scrub the polish with a floor buffer that has a stripping pad.
    • Try wiping up the stripper with a wet/dry vacuum that has a squeegee attachment.
  6. Advertisement
Method 2
Method 2 of 3:

Stripping Wax from Linoleum

PDF download Download Article
  1. Mix 1 cup (240 mL) cream of tartar into 1 gallon (3.785 L) of white vinegar, stirring until the tartar dissolves. Saturate the floor with the solution and let it sit for about 5 minutes. Hand scrub a section of the floor in a circular motion using a nylon scrubbing pad. Wipe with a damp cloth or sponge, then move onto the next section of floor. [6]
    • Repeat this process in any areas that still have wax buildup.
  2. Mix 3 parts water to 1 part isopropyl alcohol. Before scrubbing the wax with this solution, put on rubber gloves and open your windows to ventilate the room. Scrub the floor using the water and alcohol solution and a stiff scrubbing brush or nylon scrubbing sponge.
  3. Mop your floor with clear, warm water after you’ve scrubbed it with the cream of tartar and vinegar or the isopropyl alcohol solution. Dry the floor thoroughly with old towels or rags. Once the floor is dry, you can apply fresh wax.
  4. Advertisement
Method 3
Method 3 of 3:

Removing Wax from Wood Floors

PDF download Download Article
  1. Rub the mineral spirits into the wood. You can also use fast-drying naphtha. Scrub away the old wax using old rags or fine steel wool. [7]
  2. After you scrub away the wax, wipe up the old wax, mineral spirits or naphtha with clean, soft rags. Rub it dry with old towels or rags. Prevent damage to the wood by making sure the floor is completely dry. Finish up by applying fresh wax and buffing the floor.
  3. Ventilate the room well as you scrub the floor and as it dries. Wear rubber gloves as you scrub and to dispose of your old rags and steel wool. If using naphtha, protect your eyes with goggles. Soak the rags you use in water and store them in an airtight container before you dispose of them at a hazardous waste disposal facility. [8]
  4. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    How do you remove wax buildup from vinyl flooring?
    Michelle Driscoll, MPH
    Founder, Mulberry Maids
    Michelle Driscoll is the Owner of Mulberry Maids, which is based in Fort Collins, Colorado. With five years of experience, her business specializes in cleaning homes and small offices. She holds a Masters in Public Health from the Colorado School of Public Health. Additionally, Mulberry Maids has an A+ rating from the Better Business Bureau.
    Founder, Mulberry Maids
    Expert Answer
    To remove wax buildup from vinyl flooring, you do have a few options. You can use a solution such as 2 gallons of hot water, 2 cups of ammonia, and 1 cup of dishwashing detergent (or laundry detergent). Let the solution sit on the floor for a few minutes before you begin scrubbing the floor with your mop or a scrub brush. Alternatively, you can scrub the floor with club soda and a scrub brush or you can apply a store-bought floor polish stripper. Regardless of the method you choose, be sure to rinse the floor with warm water and completely dry the floor.
  • Question
    How do you get rid of wax buildup?
    Michelle Driscoll, MPH
    Founder, Mulberry Maids
    Michelle Driscoll is the Owner of Mulberry Maids, which is based in Fort Collins, Colorado. With five years of experience, her business specializes in cleaning homes and small offices. She holds a Masters in Public Health from the Colorado School of Public Health. Additionally, Mulberry Maids has an A+ rating from the Better Business Bureau.
    Founder, Mulberry Maids
    Expert Answer
    First, figure out what type of flooring you have, as every type of flooring has a different method for wax removal. You can either purchase a floor wax removal solution for your particular floor type or you can make a homemade version. For example, from tile or vinyl, you can use hot water, ammonia, and dish soap. For linoleum, you can use cream of tartar and vinegar, and for wood, it is recommended to use mineral spirits.
  • Question
    How do you remove wax buildup from laminate floors?
    Michelle Driscoll, MPH
    Founder, Mulberry Maids
    Michelle Driscoll is the Owner of Mulberry Maids, which is based in Fort Collins, Colorado. With five years of experience, her business specializes in cleaning homes and small offices. She holds a Masters in Public Health from the Colorado School of Public Health. Additionally, Mulberry Maids has an A+ rating from the Better Business Bureau.
    Founder, Mulberry Maids
    Expert Answer
    For most laminate floors, you can mix 2 cups of vinegar with 1 gallon of warm water. You can either hand wipe the floors using a cloth with the vinegar solution or you can use a cloth mop head. It is important to rinse the cloth often and not to scrub back and forth, work the cloth only in one direction. If there are large sections of built-up wax, you can use a plastic windshield wiper to scrape the wax off the floors.
See more answers
Ask a Question
      Advertisement

      Tips

      • There are several products sold commercially to use for stripping wax from floors. Be sure to read the label carefully and make sure the product is safe for use on your floor type before you try it.
      • It is a good idea to remove the wax buildup from your floors a couple of times a year to prevent the buildup from getting too thick. The thicker the buildup, the more difficult it is to remove.
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • Some commercial wax stripping products contain harsh chemicals that are dangerous to inhale. Be sure to open windows and ventilate the house properly when using these products.
      Advertisement

      About This Article

      Article Summary X

      The best way to strip wax buildup from floors depends on what kind of floors they are. For tile floors, remove the wax by mopping with ammonia, laundry detergent, and warm water. Then, let the solution sit on the floors for 10 minutes before scrubbing it in with a sponge. If you're trying to remove wax from linoleum floors, use diluted isopropyl alcohol to scrub the floors. If you want to learn how to strip wax from hardwood floors, keep reading the article!

      Did this summary help you?
      Thanks to all authors for creating a page that has been read 248,666 times.

      Reader Success Stories

      • June McQueen

        Jan 28, 2018

        "I have been looking for commercial products and have not found any that I feel comfortable with for removing wax ..." more
      Share your story

      Did this article help you?

      Advertisement