3 Easy Ways to Take Out Bridge Pins

PDF download Download Article
PDF download Download Article

A stuck bridge pin can be a hassle when you're trying to restring your acoustic guitar. You could always buy a special tool to pull bridge pins easily without damaging the pin or your guitar—but you don't have to! It's relatively easy to take out your bridge pins using things you probably have lying around. Play around with different tools or objects and choose the one that's easiest for you.

Method 1
Method 1 of 3:

String Cutters or Pliers

PDF download Download Article
  1. If you work on guitars frequently, you likely have a pair of string cutters in your guitar bag. Any other wire cutters or needle-nose pliers will also work. [1]
    • If you're worried about damaging the bridge pin with your cutters or pliers, put a soft cloth over the head to protect it.
  2. Simply close the mouth of your pliers around the head, don't squeeze it. Lay the handles over the saddle of the guitar, in the direction of the strings. [2]
    • You can also do this from the other side, with the mouth of your pliers or string cutters facing towards the strings and fingerboard of your guitar. [3]
    Advertisement
  3. The pliers simply give you more grip on the bridge pin. Rather than trying to pry the bridge pin out, lift straight up. If it seems stuck, give it a little twist, then try pulling again. [4]
    • If you try to pry the bridge pin out, you could snap it in two. You also risk widening the hole, which would mean the bridge pin won't sit securely in place when you pop it back in.
    4. Advertisement
Method 2
Method 2 of 3:

Tool-Free

PDF download Download Article
  1. If you don't have any tools handy but you can find a piece of string, tie a loop around the top of the bridge pin and pull it tight. Then, pull the end of the string up and out to release the bridge pin. [5]
    • Once you've pulled off one of the bridge pins, you can untie the string and use it again to pull out the other bridge pins.
  2. Take an ordinary kitchen spoon, preferably one with a relatively thin handle, and position the tip of the handle just under the head of the bridge pin on the string side. Rest your fingers on the sides of the bridge pin so you can catch it and keep it from flying off. Then, gently press the spoon down, using the saddle for leverage, to release the bridge pin. [6]
    • Be careful to be gentle when doing this—you don't want to gouge the bridge or knick the bridge pin itself. That'll make it more difficult for the bridge pin to stay in place once you put it in again.
    • You can also use virtually anything that has a reasonably flat, straight edge, such as a ruler or a flat-head screwdriver. [7]
  3. Place the coin in your fingers and slip through the soundhole of your guitar. Locate the tip of the bridge pin with your fingers and place the coin over it so the bridge pin is roughly in the center of the coin. Push the coin with your thumb to release the bridge pin. [8]
    • Be careful not to get your hand stuck in the soundhole. If it's a tight fit, you might want to stick to another method that doesn't require you to stick your hand inside your guitar.
    4. Advertisement
Method 3
Method 3 of 3:

String Winder

PDF download Download Article
  1. Many acoustic guitars come with a string winder that helps you easily wind the strings on your tuning pegs to string your guitar. The end is notched so that the bridge pins will fit perfectly into the notch. [9]
    • If you don't have a string winder, it's a worthy investment. You can buy them online or at guitar stores and they're typically between $10 and $20. The more expensive models may be battery-powered or come with a string cutter. [10] String winding tools have a bridge pin puller, so you don't need a separate tool.
    • Cheaper plastic string winders might not be durable enough to use as a sturdy bridge pin puller. You can still try it, but be careful not to break it. Metal string winders work better.
  2. Turn your string winder so the open side of the bridge pin puller slot is facing the strings and fingerboard of your guitar. Then, slide the slot at the end of your string winder right at the throat of the bridge pin so the head is secure. [11]
    • If your string winder came with your guitar, the slot should fit your bridge pins perfectly. A string winder you bought separately should still work, but you might have to wiggle it around a little bit to make sure it's holding the head of the bridge pin securely.
    • Put a business card along the bottom edge of your bridge, below the bridge pins, if you're worried about accidentally denting your bridge. This is more important if you're working with a metal string winder.
  3. Wiggle the string winder around a bit to loosen up the pin, then press backward towards the curve in the notch to pry the bridge pin out. You might have to do this motion several times before the bridge pin pops out. [12]
    • Even with a business card, avoid applying too much force, or you could damage your bridge.
    4. Advertisement

Expert Q&A

Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      • While you have your strings off your guitar, take the time to clean and polish the body and the fingerboard. [13]
        Thanks
        Helpful 1 Not Helpful 0
      • Make sure to place the pins in a cup or other recipient after removal so you don't lose them, since they are small and easy to lose sight of.
        Thanks
        Helpful 1 Not Helpful 0
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • Make sure you loosen your strings before you take out the bridge pins. Otherwise, the string may snap up and hit you. [14]
        Thanks
        Helpful 0 Not Helpful 0
      Advertisement

      You Might Also Like

      How to
      Restring Your Guitar at Home: Step-by-Step Guide
      How to
      Change Strings on an Electric Guitar
      How to
      Restring a Nylon String Classical Guitar
      How to
      Find Out the Age and Value of a Guitar
      3 Easy Methods for Tuning Your Guitar by Ear
      3 Ways to Tune a Guitar 1/2 Step Down
      How to
      Fix Guitar Strings
      How to
      Connect a Guitar Pedal
      How to
      Change the Nut on Your Guitar
      How to
      Fix a Warped Guitar Neck
      How to
      Set Your Guitar's Intonation
      How to
      Dress Frets
      How to
      Tune a Guitar
      How to
      Change Bass Strings the Right Way
      Advertisement

      Expert Interview

      Thanks for reading our article! If you’d like to learn more about removing bridge pins, check out our in-depth interview with Tomas Michaud .

      References

      1. ↑ http://www.frets.com/FretsPages/Musician/Guitar/Setup/SteelStrings/PullPin/pullpin.html
      2. ↑ https://youtu.be/WB5z9RYd9-E?t=68
      3. ↑ https://youtu.be/p2YVBPwUSWQ?t=190
      4. ↑ http://www.frets.com/FretsPages/Musician/Guitar/Setup/SteelStrings/PullPin/pullpin.html
      5. ↑ https://youtu.be/p2YVBPwUSWQ?t=60
      6. ↑ https://youtu.be/OcqHD6Hmvjs?t=28
      7. ↑ https://youtu.be/p2YVBPwUSWQ?t=155
      8. ↑ http://www.frets.com/FretsPages/Musician/Guitar/Setup/SteelStrings/PullPin/pullpin.html
      9. ↑ http://www.frets.com/FretsPages/Musician/Guitar/Setup/SteelStrings/PullPin/pullpin.html
      1. ↑ https://beginnerguitarhq.com/best-guitar-peg-winder/
      2. ↑ https://youtu.be/p2YVBPwUSWQ?t=102
      3. ↑ https://youtu.be/p2YVBPwUSWQ?t=108
      4. ↑ https://youtu.be/p2YVBPwUSWQ?t=35
      5. ↑ https://youtu.be/p2YVBPwUSWQ?t=63

      About This Article

      Thanks to all authors for creating a page that has been read 77,154 times.

      Did this article help you?

      Advertisement