Download Article
Download Article
The flute is a delicate woodwind instrument that can be damaged if not handled correctly. Assembling a flute is a matter of identifying the instrument’s various parts and following a few simple guidelines to attach them to each other. Once you get the hang of things, assembling a flute will become second nature.
Steps
-
Open your flute case. A disassembled flute is divided into three pieces of different sizes. You’ll need to learn which is which before you can put your flute together. [1] X Research source
- The headjoint is the top part of the flute, which has the lip plate.
- The body of the flute is the central portion, and the largest, with several keys on it.
- The footjoint is the smallest part, forming the bottom of the flute.
-
Unpack and clean your flute pieces. Take the parts of your flute out of the case, one by one. Lift them by their ends only, to avoid damaging them. As you take the parts out of the case, give them a quick wipe down with a polishing cloth to clean them so they’ll fit together properly.
- Pay special attention to the ends of the pieces--making sure they are free from dirt will help the flute fit together properly.
Advertisement -
Bring the headjoint and the body together. Gently hold the headjoint in one hand and the body in another. Insert the end opposite the lip plate of the headjoint into the end of the body that is bare metal, not covered by keys. You'll want to bring the pieces together with a slight twisting motion. [2] X Research source
- If you're having trouble bringing the pieces together, don't force it. Wipe the joints of the pieces with your cloth and try again.
- Take care to hold the pieces gently, by the ends, not by the keys. If you forcefully grab them as you twist, you might damage your instrument.
-
Line up the lip plate and the keys. If you have a beginner’s flute, you might see that it has little arrow markings where the pieces come together. If you see those, just gently twist the body and the headjoint until the arrows line up. Even if your flute doesn't have markings, it's not difficult to line the pieces up: just gently twist until the hole on the lip plate is centered with the keys on the body. [3] X Research source
-
Attach the foot joint to body. Bring the foot joint and the body together at their joints, again with a slight twisting motion. Gently turn until the first key on the foot joint is slightly to the right of the keys on the body.
- Keep the pieces straight as they come together. Attaching them at an angle may damage your flute.
- Some flautists find it helpful to gently press the low C and C# keys with their thumb as the attach the footjoint to the body. [4] X Research source
-
Test your flute. Once all the pieces of your flute are assembled, play it a bit to make sure it is in tune and put together properly. If something looks, feels, or sounds off, stop and make adjustments as needed.
- Use a tuner to help determine if you are hitting notes correctly. There are many convenient electronic tuners you can try.
-
Disassemble your flute carefully. When you are done playing your flute, you should first give it a quick wipe down with your cloth to help keep it clean. Next, take it apart by using the same gentle twisting motions as you did when assembling. Holding each piece by the ends, place them one by one back into the flute’s case. [5] X Research source
Advertisement
-
Ask for help if you need it. If you are ever unsure if you are assembling your flute correctly, ask your teacher for more guidance. They can give you pointers and watch as you assemble your flute to make sure you are doing it correctly. [6] X Research source
-
Do not use lubrication. The joints of a flute are designed to fit snugly for proper tone and intonation. You might think that adding some kind of lubrication will make it easier to assemble the flute, but this can actually cause your flute to play and sound incorrectly. Avoid putting any kind of oil or other lubrication on your flute when assembling it. [7] X Research source
-
Handle the flute parts with care. Always be gentle when assembling your flute. Don’t put your fingers on the moving parts when putting the joints together (unless you are lightly pressing the C keys when putting the footjoint and body together). Use a light touch and gentle twisting motions to fit the joints together, rather than grasping the flute pieces in your hand. Following these guidelines will prevent you from damaging your flute. [8] X Research source
-
Swab and clean your flute regularly. Keeping your flute clean is important for maintaining the instrument, and it’s convenient to do so when you’re assembling it. Use a polishing cloth (sometimes called a “silver cloth”) available from a music store. Gently wiping the flute and swabbing moisture from the insides when you disassemble it will be sufficient for everyday cleaning. [9] X Research source
Advertisement
Community Q&A
Search
-
QuestionHow do I make a sound through a flute?SodaToastCommunity AnswerTighten or loosen the embouchure until you make sound. Make sure you have a fingering chart on hand so you know whether or not you have the right fingering. You might have to roll in or roll out your headjoint a couple of times. Also, blow fast air.
-
QuestionWhen you say "If the tuner indicates that you are sharp, pull the head joint out slightly. If it indicates that you are flat, push it in," are you referring to slightly pulling apart the actual joint between the head and body, or do you mean rotating the angle slightly towards or away from my mouth?Community AnswerThey are referencing pulling the actual joint. If you wish to tune using the rolling method (which I do not condone, since better tone comes from having the flute rolled further out), if you are flat, roll out, if you are sharp, roll in.
-
QuestionI can't hear anything! What do I do?Maddy VaudinCommunity AnswerYou need to make your embouchure into more of an "o" shape rather than just blowing. Learning to play the flute properly can take a little while, so be patient.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
Submit a Tip
All tip submissions are carefully reviewed before being published
Thanks for submitting a tip for review!
References
- ↑ http://tjflutes.com/PDFs/Trevor%20James%20Flute%20Owners%20manual%20for%20website.pdf
- ↑ https://www.forsyths.co.uk/content/116-how-to-assemble-your-flute
- ↑ https://www.jennifercluff.com/basichold.pdf
- ↑ http://tjflutes.com/PDFs/Trevor%20James%20Flute%20Owners%20manual%20for%20website.pdf
- ↑ https://www.forsyths.co.uk/content/116-how-to-assemble-your-flute
- ↑ http://www.childrensmusicworkshop.com/instruments/flute/maintenance/
- ↑ http://www.childrensmusicworkshop.com/instruments/flute/maintenance/
- ↑ https://www.jennifercluff.com/basichold.pdf
- ↑ http://www.childrensmusicworkshop.com/instruments/flute/maintenance/
About This Article
Article Summary
X
To assemble your flute, start by wiping the ends down with a polishing cloth, so they’ll be easier to put together. Next, insert the open end of the headjoint into the end of the body that's not covered by keys. Try to use a gentle, twisting motion to bring the pieces together without forcing them, which can damage your flute. Once you’ve got the pieces together, line the lip plate up with the keys. Then, attach the foot joint to the body so the rest of the keys line up, as well. To learn how to disassemble and clean your flute, keep reading!
Did this summary help you?
Thanks to all authors for creating a page that has been read 110,609 times.
Reader Success Stories
- "My flute came without an instruction manual. I had no idea how to put the flute together. Thanks to this helpful article, I was able to assemble my flute with no problems." ..." more
Advertisement
80%
of readers found this article helpful
.
Click a star to add your vote
% of people told us that this article helped them.
"My flute came without an instruction manual. I had no idea how to put the flute together. Thanks to this helpful article, I was able to assemble my flute with no problems."
..."
more
