How to Blow a Fuse

PDF download Download Article
PDF download Download Article

Most people blow fuses by mistake when they run too much electrical current through an appliance or home circuit. However, you can do this on your own using a set of simple supplies. This can be a good way to teach how circuits, voltages, and amps work. Proceed with caution, as some fuses can explode when they are blown. Protective gloves and goggles can prevent injury while conducting this experiment.

Method 1
Method 1 of 2:

Part I: Assembling Your Materials

PDF download Download Article
  1. There are two main types of fuses: cylindrical and plug fuses. Cylindrical fuses consist of a ribbon of fusible metal enclosed in a ceramic or fiber cylinder. This type of fuse is usually used in appliances. Plug fuses are typically used to protect in home electrical wiring and consist of a metal strip through which current must flow. These are placed in an electric circuit so that current flows through the metal strip to complete the circuit. These typically have a window in the plug so you can see the condition of the metal strip.
    • If excess current flows through the fuse, the metal strip will heat to its melting point and break. This is what blows a fuse.
    • An ampere, or its abbreviation "amp", is a unit that is used to measure electrical current. Current can be defined as a count of the number of electrons running through a circuit. One amp is the amount of current produced by one volt.
    • The ampere rating of a fuse is based on the number of amps (i.e the amount of electrical current) a fuse can handle before it will blow.
  2. You should have a power-supply with an ampere-rating greater than your fuse ampere-rating. And lastly two wires that will connect the power-supply and the fuse. The ampere-rating of the wires should be greater or equal to power-supply ampere-rating.
    • In order to blow a fuse, the number of amps produced from the power supply and wires must be greater than that of the fuse. When you want to blow a fuse you need to make sure that you are putting more amps through the fuse than it can handle.
    • A power supply can be a battery. Copper wires are good conductors of electricity. These, and most fuses, can be purchased from most hardware stores. Consult packaging for amperage ratings. [1]
    Advertisement
  3. Some fuses may explode, so you need to protect yourself from danger with protective gear.
    • Wires may get hot when power supply runs through them. Also keep in mind that wires are conductors of electricity. In order to safely handle these, make sure you have gloves made of 100% rubber, as this is the only sure way to protect yourself from both the heat and electrical current of your wires. Rubber is an insulator from electric current.
    • It is also a good idea to wear protective goggles to shield your eyes from glass or plastic debris that might result from an exploded fuse.
    4. Advertisement
Method 2
Method 2 of 2:

Part II: Connecting and Blowing the Fuse

PDF download Download Article
  1. In order to blow your fuse, you must create a complete circuit using the power supply, wires, and fuse.
    • All power supplies, such as batteries, will have a positive and negative terminal. This is where you should connect your wires to your power source. [2]
    • Place one wire on the negative terminal of your power supply.
    • Place the other on the positive terminal of your power supply.
  2. This will complete the circuit needed to run electric current through the fuse from the power supply.
    • Make sure the wires are touching both the positive and negative ends of the terminal as well as both ends of the fuse. If there is not complete contact, the circuit is not complete and electricity cannot be conducted. [3]
  3. Some fuses may explode, so it is an important safety step to make sure your gear is properly worn before turning on the power supply.
    • You should not work near any flammable materials. Electric currents may produce a spark that can ignite flammable liquids and dry flammable objects.
  4. The fuse should now blow. Proceed with caution.
    • If your fuse does not blow, disconnect the power supply and check to see that your circuit is connected properly. [4] Check to make sure that the metal strip inside the fuse is intact. If it is not, the fuse is already broken and you should try a different fuse. If you are using a battery as a power source, test to see that it is working properly.
    5. Advertisement

Community Q&A

Search
Add New Question
  • Question
    How do I blow a fuse by plugging something into the outlet?
    Community Answer
    Overload the circuit. The easiest way to do this is to plug a copious amount of string lights into an outlet.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 8
  • Question
    What does it mean if someone says you have a short fuse?
    Donagan
    Top Answerer
    It means you're likely to "explode" quickly, that you're not as patient as you could be.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 1
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      • Some fuses may explode, so it is best wear protective gear for your body and face.
        Thanks
        Helpful 0 Not Helpful 0
      • Make sure you follow specifications stated about ampere ratings. You may destroy a power-supply and/or the wires if you do not follow these guidelines.
        Thanks
        Helpful 0 Not Helpful 0
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      Advertisement

      You Might Also Like

      How to
      Make a Simple Electric Generator
      How to
      Make an EMP Generator from a Disposable Camera
      How to
      Use a Multimeter
      How to
      Make a Simple Electrical Circuit
      How to
      Build a Motor
      How to
      Make a Tesla Coil
      How to
      Convert AC to DC
      How to
      Solder Wires, Electronics, and More
      How to
      Mount and Wire a Junction Box
      How to
      Make a Burning Laser
      Simple Electric Motor Project: Materials & Instructions
      How to
      Build a High Powered Laser
      How to
      Build an Electric Engine With a Battery, Wire & Magnet: Step-by-Step
      How to
      Remember Electrical Resistor Color Codes
      Advertisement

      References

      1. ↑ https://www.allaboutcircuits.com/textbook/experiments/chpt-2/a-very-simple-circuit/
      2. ↑ https://www.qrg.northwestern.edu/projects/vss/docs/Power/2-how-do-batteries-work.html
      3. ↑ https://www.allaboutcircuits.com/textbook/experiments/chpt-2/a-very-simple-circuit/
      4. ↑ https://www.allaboutcircuits.com/textbook/experiments/chpt-2/a-very-simple-circuit/

      About This Article

      In other languages
      Thanks to all authors for creating a page that has been read 67,733 times.

      Reader Success Stories

      • Jerry Knowles

        May 5, 2017

        "Step by Step, including pictures. very helpful!"
      Share your story

      Did this article help you?

      Advertisement